Posted: Sat Mar 04, 2023 15:18 Post subject: New Build - 03/04/2023 - r51935
Welcome to Broadcom r51935 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Sat Mar 04, 2023 18:31 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r51935 std (03/04/23) Kernel: Linux 4.4.302-st37 #8831 SMP Sat Mar 4 04:24:31 +06 2023 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope, ran remove unused NVRAM parameters script. Previous: 02-28-2023-r51887 Status: Working really, really well so far; still testing. wl: 14E4:4360 Overclock (STOCK): 1000,800 (Stock for now, 1200,1600 later if it actually works. RAM OC appears to be broken.) Temperatures: CPU 56.9 °C / WL0 49.2 °C / WL1 50.5 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest.jpg
Description:
Speedtest Over 5.8GHz Wireless. ISP Spec: 500 Mbps Down / 25 Mbps Up.
Filesize:
61.17 KB
Viewed:
2001 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Joined: 01 Dec 2021 Posts: 289 Location: Maryland, United States
Posted: Sat Mar 04, 2023 18:45 Post subject:
Router/Version: Netgear R7000P
Firmware Version: DD-WRT v3.0-r51935 std (03/04/23)
Kernel Version: Linux 4.4.302-st37 #8837 SMP Sat Mar 4 05:09:31 +06 2023 armv7l
Previous/Reset: r51855 / No Reset
Mode/Status: Gateway / Working
Issues/Errors : None with Verizon, no LAN IPv6 with Comcast
Shortcut Forwarding Engine:SFE
Flow Acceleration: CTF and FA
With Comcast which in my area uses vCMTS, I can only obtain a WAN IPv6 address with a firewall modification, but no LAN address.
yesterday en route to 51788, DDNS sevice status error noted:
"Fatal error in DDNS server response: DDNS server response not OK"
Following settings tweaked to solve for this...
Dynamic DNS Server: updates.dnsomatic.com:443 (added the ":443" to the end)
Path: "/nic/update?hostname=" (was blank before)
r51935:
OpenDNS -- OK
DDNS -- OK (custom for dns-o-matic)
SSH Tunneling -- OK
Seems good! _________________ reenignE esreveR
Resistance is NOT futile... It's Voltage divided by Current!
Assumptions:
1. Everyone on the forum has read the relevant forum section announcements.
2. For Broadcom section we have ALL at least tried to understand the "Peacock" thread,HERE
Netgear R6700 v3 – Station Bridge
Firmware Version: DD-WRT v3.0-r51935 std (03/04/23)
Kernel Version: Linux 4.4.302-st37 #8831 SMP Sat Mar 4 04:24:31 +06 2023 armv7l
Temperatures: CPU 66.9 °C / WL1 53.6 °C
Current Time: Sat, 04 Mar 2023 19:26:13
Uptime: 6:08
Reset: No
CL install over r51887
No issues
Thank you BS and gurus. _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sun Mar 05, 2023 9:05 Post subject: DD-WRT BS build 51935 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r51935 std (03/04/23)
Kernel: Linux 4.4.302-st37 #8835 Sat Mar 4 04:54:22 +06 2023 armv7l
Previous: DD-WRT v3.0-r51741 std (02/18/23)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
Not 24/7; Not using CTF, FA, STP, IPv6, VPN, VAP;
USB storage(/jffs, /opt); NAS (ksmbd, lighttpd);
WAN DNS disabled; DDNS (no-ip.com) OK
DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
Entware core (CPU: armv71) installed without problem
}
Reset: No RESET during firmware upgrade
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2023/03-04-2023-r51935/asus-rt-n18u/
Summary
Nothing strange found, just a bit sluggish. Pending cold boot....
Nothing to comment on after cold boot. _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!
Joined: 18 Mar 2014 Posts: 12908 Location: Netherlands
Posted: Sun Mar 05, 2023 9:49 Post subject:
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r51935M Community Build (03/04/23)
Kernel Version: Linux 4.4.302-st37 #1 SMP Sat Mar 4 19:47:35 CET 2023 armv7l
Upgraded from DD-WRT v3.0-r51729M Community Build (02/15/23) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: Yes, before and after (Erase NVRAM and WPS reset), No not this time.
Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
WireGuard client running with PBR.
OpenVPN client with PBR running.
IPv6 working.
NAS and ksmbd working.
NVRAM size 47K (NVRAM size should not be a problem with the Xvortex CFE)
