When I create the VLAN though, it seems to break port 1 on my R7800. He seems to reference this around the 5:53 mark as it appears to be happening to him as well. He provides a fix that does appear to work for me for ports 2 and 3 but port 1 remains broken. If I revert changes though all works fine. It's only when a VLAN is active. Is there any way to fix this? I'm running Kong's last firmware on the 7800 and other firmwares other than stock cause me to boot loop so if the fix is an firmware upgrade, I won't be able to do that unfortunately.
I have vlans setup on both an R7000 (running r47000 ish ) and also on a Linksys wrt1900acs (running latest) . I found the r7000 easy to setup and worked straight out of the box. But the Linksys was a bit tricky with a great "how to" provided in the various sticky notes. It also came up fine - after all the steps were done, and the vlans have been robust on that also.