Posted: Thu Feb 09, 2023 7:13 Post subject: New Build - 02/09/2023 - r51617
Welcome to Atheros r51617 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 18 Mar 2014 Posts: 12889 Location: Netherlands
Posted: Thu Feb 09, 2023 9:57 Post subject:
Router Model: Linksys EA8500
Firmware Version: DD-WRT v3.0-r51617M Community Build by EGC (02/09/23)
Upgraded from: DD-WRT v3.0-r51032M Community Build by EGC (12/14/22)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working.
IPv6 working.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Thu Feb 09, 2023 14:59 Post subject: New Build - 02/09/2023 - r51617
Router/Version: TP-Link TL-WDR3600 v1.5
Kernel: Linux 3.10.108-d11 #125673 Thu Feb 9 07:12:22 +06 2023 mips
Previous/Reset: r51589 / Yes
Mode: Internet gateway, WIFI 5GHz, dnsmasq, firewall
Errors: After update from r51589 to r51617 router stop respond
Status: Operating after restore factory defaults by button on case
Uptime: ~ 30 mins
Currently device working correctly, but after update via GUI router stop respond on http, https and ssh. I'm solve problem via totally restore router and make fresh configuration.
Router/Version:TP-Link TL-WR841ND v11
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #163030 Thu Feb 9 08:45:48 +06 2023 mips
Previous/Reset: r51589 / no
Mode/Status: AP wired and wireless / Up and running for 3 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55779
Broadcom
Asus RT-AC87U R - DD-WRT 55819
Asus RT-N66U - DD-WRT 55779
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Router/Version: NetGear r7800 /
File/Kernel: lLinux 4.9.337 #1543 SMP Thu Feb 9 05:30:08 +07 2023 armv7
Previous/Reset: 02/07/2023 - r51589 / No Reset
Mode/Status: AP / Working
Issues/Errors: 5GHz LED is working, Startup Command is working / No errors in log
For me the 5GHz LED issue is now working, and the startup script is now working as well.
Thanks to BS and the support team, my issues seem to have been addressed, at least after the initial web interface update. _________________ - a candle loses nothing by lighting another candle
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51617 std (02/09/23)
Kernel Version: Linux 4.9.337 #1543 SMP Thu Feb 9 05:30:08 +07 2023 armv7l
Previous/Reset: r51589 / No, CLI Update-> reboot & 2nd reboot
Mode/Status: GW / Working Well
Issues/Errors: On Reboot Startup Scripts didn't start, on 2nd Reboot All Good / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: 2.4 & 5Ghz Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6
Running for over 3 hours.
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51617 std (02/09/23)
Kernel Version: Linux 4.9.337 #1543 SMP Thu Feb 9 05:30:08 +07 2023 armv7l
Previous/Reset: r51589 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: 5Ghz LED is OFF / none
Services Used: 2.4 & 5Ghz Radios,Static WAN,IPv6-6to4,WiFi DD-WRT,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba
Issues: 5Ghz LED is OFF but 5Ghz Radio is working fine.
Running for over 3 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Joined: 03 Nov 2015 Posts: 317 Location: Florida, USA
Posted: Thu Feb 09, 2023 23:57 Post subject:
bushant wrote:
Netgear R7500v2 WDS STA Did This Twice
WDS STA never reconnected to R7800 (51530) WDS AP after upgrade.
No DHCP possible
set static IP & scp 51506 back to her
and returns to normal
Linksys ea8500 ..WDS AP and Linksys ea8500 ..WDS Stations ... X (2)
I thought it was just me. I upgraded my AP this morning and all went well with good internet. Later upgraded 1st Station and could not get internet access from AP. Upgraded 2nd Station but this time, erased nvram and reset but same issue, different ea8500. Went to AP location and had no internet. GUI downgrades to r51576 and all is fine again. _________________ ......All GOOD here... Just Handshakes and Time Stamps !......
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r51617 std (02/09/23) (prev. DD-WRT v3.0-r51589 std (02/07/23))
Kernel: Linux 4.9.337 #1543 SMP Thu Feb 9 05:30:08 +07 2023 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G (DHCP Client), Keep Alive reboot 6:02 in the morning
Reset: No
Status: Installed yesterday, SSH problematic - see https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=333949 for explanation.
Changeset 51541 (https://svn.dd-wrt.com/changeset/51541) added a new drop rule for invalid packets.
With this rule in place I am no longer able to SSH into a VPS behind a Wireguard Endpoint.
I added
Code:
iptables -D FORWARD -m state --state INVALID -j DROP
iptables -D INPUT -m state --state INVALID -j DROP
to firewall. This resolved it.
According to the above mentioned thread (ty again @egc and @Alozaros!) I also added
Code:
iptables -I FORWARD ! -s $(nvram get wan_ipaddr) -o $(get_wanface) -p tcp -m state --state INVALID -j DROP
iptables -I FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT
into firewall.
--> Testing the last days and releases showed no hiccups thus far.
