Posted: Tue Feb 07, 2023 6:18 Post subject: New Build - 02/07/2023 - r51589
Welcome to Atheros r51589 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.
CLI Flash: 'cd /tmp' then 'wget {file URL}' (httponly) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r51589 std (02/07/23) (prev. DD-WRT v3.0-r51530 std (01/29/23))
Kernel: Linux 4.9.337 #1531 SMP Tue Feb 7 03:47:25 +07 2023 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G (DHCP Client), Keep Alive reboot 6:02 in the morning
Reset: No
Status: Installed a few minutes ago, OK.
Joined: 16 Nov 2015 Posts: 6410 Location: UK, London, just across the river..
Posted: Tue Feb 07, 2023 9:32 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r51589 std (02/07/23)
Kernel Version Linux 3.18.140-d6 #162710 Tue Feb 7 07:30:10 +06 2023 mips
update: GUI r51576 > r51589
reset: NO
mode: Gateway
status: Operational 2h+
errors: Nothing new, yet... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Update: CLI r51184 > r51589
Reset: NO
Mode: Gateway
Status: Operational Minutes
WAN Connection Type: PPPoE
Services Used: DHCP Server, DNSMasq, USB Mount, conf-file=/jffs/dnsmasq.custom - Static Leases, IPv4, OVPN Obfuscated Server, 3 x Wireguard Commercial Client VPN's, 1 x VLAN for I-o-T, No Wireless Enabled On This Router - 2 x Wireless Mesh System Attached to LAN & VLAN.
DNS: Unbound Pi-Hole
Errors: Nothing Untoward Showing In Logs
r9000
Services: SMB, QOS htb/Cake, inadyn (opendns), WDS AP 5GHz, AP 2.4 GHz, Vanilla
Reset: No
previous:51440
error: Qos did not seem to initialize correctly, cake QOS seemed to be applied download only, while upload latencies creeped over 1sec. Toggling qos disable save/apply, enable save/apply seemed to correct the issue. Otherwise this seems good so far but only been up 1hr
Status: Up and running for 8 hours, basic setup as Gateway, static leases, port forwarding DDNS, WOL, 2,4GHz, VAP for IoT, 5Ghz, (Vanilla Firmware, Disabled Airtime), DDNS (Inadyn) to freedns.afraid.org.
On demand governor with minimum 800 MHz.
IPv6 working with PD /56.
Linksys EA8500...main gateway
DD-WRT v3.0-r51589 std (02/07/23)
Linux 4.9.337 #1529 SMP Mon Feb 6 02:02:13 +07 2023 armv7l
scp 'firmware.bin' install over r51576
all worky fine
#
Netgear WNDR3700 V4
DD-WRT v3.0-r51589 std (02/07/23)
Linux 3.18.140-d6 #162738 Tue Feb 7 08:34:56 +06 2023 mips
scp 'firmware.bin' install over r51576
all good
Router/Version: TP-Link TL-WR1043ND v4
File/Kernel: factory-to-ddwrt.bin / tplink_wr1043nd-v4.bin / Linux 3.18.140-d6 #161842 Wed Jan 25 06:12:44 +06 2023 mips
Previous/Reset: r51576 / bad flash Mode/Status: AP wired and wireless / Up and running for 2 hours
Issues/Errors:yes
I have just, tried to flash an old TL-WR1043ND v4 with DD-WRT using the UI firmware update method using factory-to-ddwrt.bin. The actual flash seems to work, but the device is caught in a boot loop, not able to mount the root fs.
It is better to refrain from installing, having no experience in recovery
Router/Version: TP-Link WDR4900 V1
File/Kernel: tl-wdr4900-webflash.bin / Linux 4.4.302-st25 #2942 Wed Nov 23 04:45:32 +06 2022 ppc
Previous/Reset: r50931 / no Mode/Status: Gateway / Up and running for 2 hours
Issues/Errors: Nothing significant
Router/Version: TP-Link TL-WR841ND v11
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #161826 Wed Jan 25 05:50:12 +06 2023 mips
Previous/Reset: r51576 / no Mode/Status: AP wired and wireless / Up and running for 2 hours
Issues/Errors: Nothing significant
The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch
Thank you BS and gurus _________________ Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55303
Broadcom
Asus RT-AC87U R - DD-WRT 55460
Asus RT-N66U - DD-WRT 55460
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
just now updated daughter's main gateway EA8500
DD-WRT v3.0-r51589 std (02/07/23)
Linux 4.9.337 #1529 SMP Mon Feb 6 02:02:13 +07 2023 armv7l
scp 'firmware.bin' install over r51032
all worky very well
Joined: 05 Oct 2008 Posts: 666 Location: Helsinki, Finland / nr. Alkmaar, Netherlands
Posted: Wed Feb 08, 2023 17:27 Post subject:
R7800 updated from previous build using easyddup.sh yesterday morning when the build was published but before it was announced here. Settings were not reset.
Problem:
Security Log Management, Firewall log enabled. Settings unchanged.
Suddenly stopped registering anything Incoming or Outgoing, whereas I got plenty Incoming connection attempts (dropped ...) on previous builds. Outgoing log also remains empty, even though actual LAN usage hasn't changed.
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51589 std (02/07/23)
Kernel Version: Linux 4.9.337 #1531 SMP Tue Feb 7 03:47:25 +07 2023 armv7l
Previous/Reset: r51440 / No, CLI Update-> reboot & 2nd reboot
Mode/Status: GW / Working Well
Issues/Errors: On Reboot Startup Scripts didn't start, on 2nd Reboot All Good / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: 2.4 & 5Ghz Radios,QoS,ttraff,SFE,Telnet,NAS,Samba,YAMon3.4.6
Running for over 27 hours.
Home Main AP Router
Router/Version: R7800
File/Kernel: DD-WRT v3.0-r51589 std (02/07/23)
Kernel Version: Linux 4.9.337 #1531 SMP Tue Feb 7 03:47:25 +07 2023 armv7l
Previous/Reset: r51440 / No, CLI Update-> reboot & 2nd rebbot
Mode/Status: GW(double-nat) & AP / Working Well
Issues/Errors: 5Ghz LED is OFF / none
Services Used: 2.4 & 5Ghz Radios,Static WAN,IPv6-6to4,WiFi DD-WRT,NTP,2xWG Clients,VAPx,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SPI,QoS,ttraff,SFE,Telnet,NAS,Samba
Issues: 5Ghz LED is OFF but 5Ghz Radio is working fine.
Running for over 27 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531