New Build - 01/29/2023 - r51530

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Sun Jan 29, 2023 11:00    Post subject: New Build - 01/29/2023 - r51530 Reply with quote
Welcome to Atheros r51530 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
List router model & version or revision, operating & wireless modes & exact filename/firmware image flashed.


CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Downloads: HTTPS, FTP

Trac SVN: repository since last build 51506 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
mDNS/Avahi 2023 BzBox Nmap ZFS values BOINC firewall USB dnscrypt LED getall SC syslog WG mesh VHT kernel proftpd
In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Sun Jan 29, 2023 12:10    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r51530) / Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l
Previous/Reset: DD-WRT v3.0-r51506 std (01/25/23) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Sun Jan 29, 2023 13:50    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r51530 std (01/29/23)
Linux 4.9.337 #1509 SMP Sat Jan 28 04:57:30 +07 2023 armv7l
scp 'firmware.bin' install over r51506
all ok

#

Netgear WNDR3700 V4
DD-WRT v3.0-r51530 std (01/29/23)
Linux 3.18.140-d6 #162142 Sun Jan 29 10:10:09 +06 2023 mips
scp 'firmware.bin' install over r51506
all ok
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Sun Jan 29, 2023 15:46    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r51530 std (01/29/23)
Previous/Reset: DD-WRT v3.0-r51506 std (01/25/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
canmanxl
DD-WRT User


Joined: 02 Feb 2017
Posts: 62

PostPosted: Sun Jan 29, 2023 17:22    Post subject: 2.4Ghz WiFi breaks with this build and the last Reply with quote
Router/Version: Netgear R9000 Nighthawk X10 AD7200
Firmware: DD-WRT v3.0-r51530 std (01/29/23)
Kernel: Linux 4.4.302-st28 #8588 SMP Sun Jan 29 06:24:55 +06 2023 armv7l
Previous: DD-WRT v3.0-r51440 std (01/19/23)
Update Method: Web Interface
Mode/Status: Gateway/Ok
Reset: No

Issues/Errors: 2.4Ghz WiFi, it seems like this build and the last build breaks my 2.4Ghz WiFi network. If I role back to build 51440 it fixes my 2.4Ghz WiFi network. I have had the same settings for at least a year and upgrade all the time and haven't had my 2.4Ghz network break until the last build and this build.
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 235

PostPosted: Sun Jan 29, 2023 17:25    Post subject: Reply with quote
Router/Version: TP-Link TL-WR841ND v11
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #162100 Sun Jan 29 08:47:36 +06 2023 mips
Previous/Reset: r51506 / no
Mode/Status: AP wired and wireless / Up and running for 3 hours
Issues/Errors: Nothing significant

The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch

Thank you BS and gurus

_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55303
Broadcom
Asus RT-AC87U R - DD-WRT 55460
Asus RT-N66U - DD-WRT 55460
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
computerperson
DD-WRT Novice


Joined: 16 May 2019
Posts: 43

PostPosted: Sun Jan 29, 2023 23:38    Post subject: r51530 seems to fix 5GHz LED and startup script issues Reply with quote
DD-WRT v3.0-r51530 std (01/29/23)

Router/Version: Netgear r7800
File/Kernel: dd-wrt-webupgrade 01-29-2023-r51530.bin / Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l
Previous/Reset: No reset
Mode/Status: AP / working OK
Issues/Errors: 5GHz LED and startup script / no errors, log is clean

============================================
UPDATE Jan 31 - after running fine the internet stopped. All the network connections were there, but could not reach internet. Power reset DSL modem, still no internet.

Powered router off and on, all is good except startup script did not run and 5GHz LED was off again. Reloaded NVRAM and still no 5GHz LED.

Rebooted router, no difference. Reloaded r51530 and same.

Manually ran startup script, was OK and all working fine except 5GHz LED,

===============================================


Updated from 01/25/2023 - r51506 using web interface

Everything working as it is supposed to as far as I can see.

5GHz LED working after update, no additional re-boot required.

Startup script executed, which seemed to be random fail in previous versions.

Great job by coders & gurus, and many thanks for your continued good work!

_________________
- a candle loses nothing by lighting another candle


Last edited by computerperson on Tue Jan 31, 2023 15:02; edited 2 times in total
MesMurized
DD-WRT User


Joined: 08 Aug 2017
Posts: 83

PostPosted: Mon Jan 30, 2023 17:18    Post subject: Reply with quote
Router/Version: Netgear R9000 Nighthawk X10
Firmware: DD-WRT v3.0-r51530 std (01/29/23)
Kernel: Linux 4.9.337 #659 SMP Sun Jan 22 06:49:15 +07 2023 armv7l
Previous: DD-WRT v3.0-r51506 std (01/25/23)
Update Method: CLI
Mode/Status: Gateway/VPN
Reset: No

All good. Thanks.

FYI: JuiceSSH & Alexa issues remain. DDWRT is still a suspect until a solution is found.

_________________
Current: Netgear R9000 DD-WRT v3.0-r55363 std (03/13/24)
Retired: Linksys WRT32X r39296, TP-Link Archer C7 v2, LinkSys WRT54G v5
MesMurized
DD-WRT User


Joined: 08 Aug 2017
Posts: 83

PostPosted: Mon Jan 30, 2023 19:34    Post subject: Reply with quote
Update: both 2.4 & 5GHz LEDs flash simultaneously.

Turned off 2.4GHz radio & apply ... 2.4GHz LED off ✓
Turned on 2.4GHz radio & apply ... 2.4GHz LED remains off Confused

Reboot: both LEDs normal ✓ Cool

_________________
Current: Netgear R9000 DD-WRT v3.0-r55363 std (03/13/24)
Retired: Linksys WRT32X r39296, TP-Link Archer C7 v2, LinkSys WRT54G v5
jbkt23
DD-WRT User


Joined: 31 Dec 2018
Posts: 57

PostPosted: Tue Jan 31, 2023 22:30    Post subject: r51530 Reply with quote
tplink ArcherC7v5
02/01/2023 Actions taken on 01/31/2023
Installed DD-WRT v3.0-r51530 std (01/29/23)
Kernel Ver Linux 3.18.140-d6 #162124 Sun Jan 29 09:26:33 +06 2023 mips
Via CLI, No Reset


Prior version r51140

Used as AP/Gateway
5g Vanilla
2.4g DD-WRT
dhcp, dnsmasq, dns

Issues unknown at this point.

_________________
ARCHER-C7v5 | v3.0-r54604 std | AP Gateway
WNDR4000|v24-52189_NEWD-2_K3.x_mega|Inactive Spare
KACTET
DD-WRT User


Joined: 01 May 2022
Posts: 235

PostPosted: Wed Feb 01, 2023 9:57    Post subject: Reply with quote
Router/Version: TP-Link WDR4900 V1
File/Kernel: tl-wdr4900-webflash.bin / Linux 4.4.302-st25 #2942 Wed Nov 23 04:45:32 +06 2022 ppc
Previous/Reset: r50931 / yes
Mode/Status: Gateway / bad flash
Issues/Errors: yes

Unsuccessful firmware installation. All new versions are broken since r50931
It is better to refrain from installing, having no experience in recovery


Router/Version: TP-Link TL-WR1043ND v4
File/Kernel: factory-to-ddwrt.bin / tplink_wr1043nd-v4.bin / Linux 3.18.140-d6 #162116 Sun Jan 29 09:08:55 +06 2023 mips
Previous/Reset: r51506 / no
Mode/Status: AP wired and wireless / Up and running for 3 hours
Issues/Errors: Nothing significant

Thank you BS and gurus

_________________
Atheros
Netgear XR500 Nighthawk - DD-WRT 54545
Tp-Link TL-WDR4900 v1.3 - DD-WRT 53133
TP-Link WR1043ND v4 - DD-WRT 51838
TP-Link WR1043ND v2 - Gargoyle OS 1.13.0
TP-Link WR841ND v11 - DD-WRT 55303
Broadcom
Asus RT-AC87U R - DD-WRT 55460
Asus RT-N66U - DD-WRT 55460
Linksys WRT54GL v1.1 - DD-WRT 54517M
Linksys WRT54GL v1.1 - FreshTomato 2023.4_MIPS_K26
Linksys WRT54GL v1.1 - Gargoyle OS 1.6.2
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 733

PostPosted: Wed Feb 01, 2023 13:34    Post subject: Reply with quote
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r51530 std (01/29/23) (prev. DD-WRT v3.0-r51506 std (01/25/23))
Kernel: Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G (DHCP Client), Keep Alive reboot 6:02 in the morning
Reset: No
Status: Installed two days ago, OK.
poyntzj
DD-WRT Novice


Joined: 26 Dec 2012
Posts: 37

PostPosted: Thu Feb 02, 2023 9:55    Post subject: Reply with quote
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r51530 std (01/29/23) (prev. DD-WRT v3.0-r51506 std (01/25/23))
Kernel: Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l
Mode: Gateway, SFE enabled, 2.4G and 5G wifi; DHCP Server
5G - AP (WDS) - Initial SSID hidden + VAP
2G - AP + VAP; TurboQAM (QAM256) - Disabled
Reset: No
Status: Operational. 2G was not operational until TurboQAM (QAM256) was disabled
5Ghz Wifi light not working

There are 2 of these
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r51530 std (01/29/23) (prev. DD-WRT v3.0-r51506 std (01/25/23))
Kernel: Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l
Mode: Router, SFE enabled, 2.4G and 5G wifi.
5G - Station (WDS) - SSID hidden + VAP
2G - AP + VAP; TurboQAM (QAM256) - Disabled
Reset: Yes
Again. with TurboQAM there was no 2G.
5G wifi light is working on these 2 after a reset

The main 5G SSID is hidden and is used for the backbone. The VAP is the same name on all 3 devices
The main 2G SSID is the same name on all 3 devices. The VAP is unique per device and used purely for some testing

I'll get around to resetting the Gateway at some point, but redoing the config takes a little time compared to the routers
matjazk
DD-WRT User


Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

PostPosted: Fri Feb 03, 2023 12:41    Post subject: Reply with quote
Router/Version: Netgear R9000 (Netgear Nighthawk X10)
File/Kernel: DD-WRT v3.0-r51530 std (01/29/23) / Linux 4.9.337 #659 SMP Sun Jan 22 06:49:15 +07 2023 armv7l
Previous/Reset: No
Mode/Status: Gateway, Guest VAP / OK
Issues/Errors: None

Web upgrade. No issues with Juice SSH.
matjazk
DD-WRT User


Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

PostPosted: Fri Feb 03, 2023 12:42    Post subject: Reply with quote
Router/Version: Netgear R7800
File/Kernel: DD-WRT v3.0-r51530 std (01/29/23) / Linux 4.9.337 #1511 SMP Sun Jan 29 05:15:20 +07 2023 armv7l
Previous/Reset: No
Mode/Status: WDS AP, Guest VAP
Issues/Errors:

Web upgrade.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum