New Build - 01/19/2023 - r51440

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4698

PostPosted: Thu Jan 19, 2023 5:44    Post subject: New Build - 01/19/2023 - r51440 Reply with quote
Welcome to Marvell r51440 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build 51362 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
mDNS/Avahi XFS DLNA FRR Tor mac80211 nDPI dnsmasq WG 2023 kernel BusyBox Nmap ZFS values boinc firewall inadyn
In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
matjazk
DD-WRT Novice


Joined: 21 Aug 2019
Posts: 35

PostPosted: Thu Jan 19, 2023 11:39    Post subject: Reply with quote
Router/Version: Linksys WRT1200AC (V1)
File/Kernel: ddwrt-linksys-wrt1200ac-webflash.bin (r51440) / Linux 4.9.337 #3603 SMP Thu Jan 19 04:28:37 +07 2023 armv7l
Previous/Reset: No
Mode/Status: WAP / USB, Samba, SSH, Entware - all working fine.
Issues/Errors: None so far.
oliver44
DD-WRT User


Joined: 01 Jun 2016
Posts: 317

PostPosted: Thu Jan 19, 2023 19:26    Post subject: Reply with quote
DD-WRT Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r51440 std (01/19/23)
Kernel Version Linux 4.9.337 #3603 SMP Thu Jan 19 04:28:37 +07 2023 armv7l
Uptime 18 min

update-browser waterfox, I switched from partition 1 from Linksys firmware
connection Type PPPoE - IPv6 Type DHCPv6 with Prefix Delegation 1Gbps
IPv6 Type DHCPv6 with Prefix Delegation-On - Ok
Operating Mode Gateway/AP
Shortcut Forwarding Engine-On
Schedule Reboot-On,
Web Access Protocol - HTTPS,
SSH (public key)-ok
Port Forwarding - Ok,
USB - System Log -Ok
Schedule Reboot - At a Set Time - On


Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC/N, Width VHT 80 Mhz-Wireless Channel-36,Short GI, Short Preamble, Single User Beamforming, Radio Scheduling, Enable-WPA2/WPA3 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N, Width VHT 40 Mhz-Wireless Channel-6, Extension Channel Lower,Short Preamble, Short GI , Radio Scheduling, Enable-WPA2/WPA3 Personal-CCMP-128 (AES) all-ok!

After configuring the settings, I rebooted the router every time!

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt
WDR3600 rev.1.5 - DD-Wrt
dpp3530
DD-WRT Guru


Joined: 12 Dec 2007
Posts: 616
Location: Pittsburgh, PA USA

PostPosted: Sun Jan 22, 2023 3:13    Post subject: Reply with quote
Router/Version: WRT1900AC v1
File/Kernel: DD-WRT v3.0-r51440 std (01/19/23)
Previous/Reset: DD-WRT v3.0-r51362 std (01/16/23), No reset this time, no config changes
Mode/Status: Gateway (SFE enabled), Access Point, IPV6 (DHCP6 w/ prefix delegation), Entware, DOT via SmartDNS, OpenVPN server, Wireguard Server, Privoxy
Issues/Errors:
Up 64 hours, nperf.com shows expected ISP speeds, both wired and wireless. OpenVPN, Wireguard, DOT, and Privoxy all working as expected. Thanks Devs.

_________________
__________________________
Linksys WRT-1900AC
DD-WRT v3.0 STD
Netgear R7000
DD-WRT v3.0 STD
Netgear R7800
DD-WRT v3.0 STD
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 229

PostPosted: Tue Jan 24, 2023 16:21    Post subject: Reply with quote
Router/Version: Linksys WRT1900ACS v1 / DD-WRT v3.0-r51440 std (01/19/23)
File/Kernel: CLI webflash / Linux 4.9.337 #3603 SMP Thu Jan 19 04:28:37 +07 2023 armv7l
Previous/Reset: r49681 (& r50357) / No
Mode/Status: Gateway, DNSmasq, OpenVPN Client, FreeRADIUS Server, VLANs, VAPs, WPA3, Radar Detection (DFS), 14 dBm, AutoChannel / Uptime 11:36
Issues/Errors: Previously I'd tried r50357 but was unable to connect at all (wired/wireless/gui/ssh/putty/winscp), so I'd used the power switch thrice to switch back to the working r49681 partition. This weekend I flashed r51440 and encountered the following issues:
1) DNSMasq broken, 2) FreeRadius broken, 3) SSH broken (tried Putty & WinSCP), 4) GUI submenus sometimes disappearing in Firefox (but okay in PaleMoon).

Trouble-shooting and work-arounds:
1) I've temporarily bypassed DNSMasq by deselecting "Use dnsmasq for DNS" in Setup/BasicSetup, and can now access DNS and NTP. But what's changed?
2) I've regenerated the Certificate in Services/FreeRadius, but no joy yet (actively working on this today and will update if any success).
3) I was going to try telnet to trobleshoot broken ssh, but it's grayed out in Administration/Management. Even though it shouldn't affect the LAN side, I did try deselecting "Limit SSH Access" in Security/Firewall, but still can't get SSH access (wired from the LAN side). Any ideas? Unfortunately, I can't think of a way to download my post-boot logs without SSH working, but attached is a copy/paste from the last reboot.
4) GUI submenus seem to have self-resolved even in Firefox, so not an issue.

EDIT:
FreeRadius issue resolved by regenerating the Certificate a third time. Smile So my remaining issues are DNSMasq and LAN-side SSH access.

_________________
My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 11151
Location: Netherlands

PostPosted: Tue Jan 24, 2023 17:06    Post subject: Reply with quote
SSH has been upgraded.
If you have trouble connecting with SSH then download the latest Putty and make sure under SSH/Host keys to move ed25519 to the top and untick "Prefer Algorithms for which a host key is known" or forget/remove your known HOST keys (the fingerprints) from your client.

If you have trouble connecting with WinSCP under Tools/Clean up Clear Cache

See also: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=333540

Telnet can be enabled from the Services tab

If DNSMasq does not run it usually is a bad setting in the Additional DNSMasq options, or non-alphanumeric characters in the static leases, only letters, numbers and a hyphen are allowed (and possibly an underscore but not at the begining)

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
o2bad455
DD-WRT User


Joined: 08 Oct 2015
Posts: 229

PostPosted: Tue Jan 24, 2023 19:46    Post subject: Reply with quote
Many thanks @egc! That resolved both my Putty and WinSCP issues. LAN-side SSH is working well again!

I don't see any obvious DNSMasq errors, so I'll read up to refresh my memory and deal with that again later.

Now that almost everything from my delay is sorted, this is a smooth and cool update! Thanks Devs!

_________________
My DD-WRT Routers:
Linksys WRT3200ACM - Marvell
Linksys WRT1900ACS - Marvell
Netgear R9000 - Atheros
Netgear R7000 - Broadcom
PC x86-64 VM - Atheros
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum