[blkt]

Welcome to Broadcom r51362 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build 51306 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• mDNS/Avahi XFS DLNA FRR Tor mac80211 nDPI dnsmasq WG 2023 kernel BusyBox Nmap ZFS values boinc firewall inadyn
• In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[jrscs]

Router/Version: Asus RT-AC87U A1
Firmware: DD-WRT v3.0-r51362 std (01/16/23)
Kernel: Linux 4.4.302-st28 #8528 SMP Mon Jan 16 05:17:11 +06 2023 armv7l
Previous: DD-WRT v3.0-r51306 std (01/15/23)
Update Method: SSH / CLI using PuTTY
Mode/Status: Gateway/AP/Ok
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DHCP, DDNS (ddns custom eNom & ddns2 Dynu), DNSMasq, Static Leases, Port Forwarding, USB jffs mounted Ext4, NTP TimeSync, Wireguard Server, and Wake-on-WAN (internet)
Issues/Errors: Ok

[mrjcd]

Linksys E2500
DD-WRT v3.0-r51362 mega (01/16/23)
Linux 4.4.302-st28 #20980 Mon Jan 16 06:08:26 +06 2023 mips
'dd-wrt.v24-51362_NEWD-2_K3.x_mega.bin'
scp 'firmware.bin' install over r51288
used as a WAP --- all good

[wabe]

Router/Version: Asus RT-AC68U & Netgear R7000
Firmware: DD-WRT v3.0-r51362 std (01/16/23)
Kernel: Linux 4.4.302-st28 #8528 SMP Mon Jan 16 05:17:11 +06 2023 armv7l
Previous: DD-WRT v3.0-r51288 std (01/15/23)
Update Method: Cli
Mode/Status: Gateway/AP
Reset: No
Setup Using: 2.4 GHz, 2.4 GHz guest (VAP), 5.0 GHz, IPv4, DHCP, DDNS, DNSMasq, Static Leases, Port Forwarding, USB jffs mounted Ext4, NTP TimeSync, Wireguard Server and Smartdns
Issues/Errors: Ok. No issues so far

[js290]

Router/Version: Netgear WNDR4000
File/Kernel: dd-wrt.v24-51362_NEWD-2_K3.x_mega-nv64k.bin
Previous/Reset: stock
Mode/Status: Gateway, 2.4GHz AP, Wireguard client/ok
Issues/Errors: seems to work