[blkt]

Welcome to Atheros r51362 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build 51306 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• mDNS/Avahi XFS DLNA FRR Tor mac80211 nDPI dnsmasq WG 2023 kernel BusyBox Nmap ZFS values boinc firewall inadyn
• In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r51362 std (01/16/23)
Previous/Reset: DD-WRT v3.0-r51306 std (01/15/23) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: None

[mrjcd]

Linksys EA8500 ...main gateway
DD-WRT v3.0-r51362 std (01/16/23)
Linux 4.9.337 #1488 SMP Sun Jan 15 05:04:18 +07 2023 armv7l
scp 'firmware.bin' install over r51306
all good

#

Netgear WNDR3700 V4
DD-WRT v3.0-r51362 std (01/16/23)
Linux 3.18.140-d6 #161356 Mon Jan 16 09:03:39 +06 2023 mips
scp 'firmware.bin' install over r51306
all good

[ramblin]

Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r51362 std (01/16/23
Kernel: Linux 4.9.337 #1488 SMP Sun Jan 15 05:04:18 +07 2023 armv7l
Reset: NO .... GUI upgrade from r51288
Mode: 2.4 GHz only .... Firmware type .. DD-WRT
Errors: NONE

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r51362 std (01/16/23
Kernel: Linux 4.9.337 #1488 SMP Sun Jan 15 05:04:18 +07 2023 armv7l
Reset: NO .... GUI upgrade from r51288
Mode: 2.4 GHz only .... Firmware type .. DD-WRT
Errors: NONE

************* UPDATE: Immediately after upgrade my AP began restarting every 2-3 min. Both stations are inactive at this time but checking status, max uptime has only been 6 min. so far. Reverted back to my fail safe r50841 on the AP and all is fine again. Will try more tomorrow.

[mrjcd]

all good here

[ramblin]

Been tweeking my settings a little each day trying to troubleshoot a station that looses connection periodically. Guess I got things messed up a little.

********* UPDATE AGAIN... Like I said I been playing with settings and in reading the wiki I came across this and for some reason decided to enable STP. I can`t say all was smooth before but the upgrade caused me some issue. All is back right again and I`ll try to reload r51362 again later.

https://wiki.dd-wrt.com/wiki/index.php?title=Spanning_Tree_Protocol#:~:text=Spanning%20Tree%20Protocol%20-%20DD-WRT%20Wiki%20Spanning%20Tree,loops.%20By%20definition%20a%20tree%20is%20loop%20free.

[d00zah]

All good, except... just re-enabled IPv6 for some testing &

DDNS freedns.afraid.org IPv6 update doesn't. Looks to be updating IPv4 twice, if'n I'm reading this right?

In-a-dyn version 2.10.0 -- Dynamic DNS update client.
Startup delay: 30 sec ...
Update forced for alias hostname.domain.net, new IP# xxx.112.yyy.167
Update forced for alias hostname.domain.net, new IP# xxx.112.yyy.167
Updating cache for hostname.domain.net
Updating cache for hostname.domain.net

[KACTET]

Router/Version: TP-Link TL-WR841ND v11
File/Kernel: tl-wr841nd-webflash.bin / Linux 3.18.140-d6 #161314 Mon Jan 16 07:41:02 +06 2023 mips
Previous/Reset: r51306 / no
Mode/Status: AP wired and wireless / Up and running for 2 hours
Issues/Errors: Nothing significant

The fact is that the router connected to the Internet (to the Internet provider). And it reports an error, the orange WAN indicator flashes (the icon in the form of a planet). Internet is working, I just think it's a glitch

Thank you BS and gurus

[ccbrianf]

Router: Linksys ea8500
Firmware: DD-WRT v3.0-r51362 std (01/16/23)
Kernel: Linux 4.9.337 #1488 SMP Sun Jan 15 05:04:18 +07 2023 armv7l
Reset: NO. GUI upgrade from r51306
Mode: Gateway w/SPI Firewall. 2.4ghz AP, 5ghz WDS AP
Errors: TCP ACK RST packets leak onto WAN with LAN source IP

Router: Netgear WNDR3700 V4
Firmware: DD-WRT v3.0-r51362 std (01/16/23)
Kernel: Linux 3.18.140-d6 #161356 Mon Jan 16 09:03:39 +06 2023 mips
Reset: NO. GUI upgrade from r51306
Mode: Router. 2.4ghz AP, 5ghz WDS Client w/VAP
Errors: 5ghz VAP to repeat WDS Client SSID fails w/Channel: Unknown if WDS AP control channel is 161 (L or LL). Works with WDS AP control channel 157 (LU-2)

Router: Dlink DIR862-A1
Firmware: DD-WRT v3.0-r51362 std (01/16/23)
Kernel: Linux 3.18.140-d6 #161350 Mon Jan 16 08:42:47 +06 2023 mips
Reset: NO. GUI upgrade from r51306
Mode: Router. 2.4ghz AP, 5ghz WDS AP
Errors: None

Router: Dlink DIR862-A1
Firmware: DD-WRT v3.0-r51362 std (01/16/23)
Kernel: Linux 3.18.140-d6 #161350 Mon Jan 16 08:42:47 +06 2023 mips
Reset: NO. GUI upgrade from r51306
Mode: Router. 2.4ghz AP, 5ghz WDS Client w/VAP
Errors: None

[js290]

Router/Version: Linksys WRT400N
File/Kernel: wrt400n-firmware.bin
Previous/Reset: DD-WRT v3.0-r44715 std (11/03/20)/No
Mode/Status: Router
Issues/Errors: Bricked, bad magic number