Posted: Tue Jan 17, 2023 11:09 Post subject: Qdisc PRIO
Hello,
being a new user of dd-wrt I would like to know if it is possible to keep the qdisc prio active after a reboot. I know the default qdisc is fq_codel but I would like to use prio,
I currently use these rules:
tc qdisc add dev eth0 root prio
tc qdisc add dev br0 root prio
I would like prio to be permanent even after reboot
Thanks.
We can give better support if you also state router model and buildnumber used.
See the forum guidelines with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
thanks,
I am on X86 version v3.0-r51362 build 51306
I do not use that platform but usually you can add rules to Administration/Commands and those are executed e.g. after startup or when the firewall is executed.
I have already tried to launch the qdisc at startup in administartion:
insmod sch_prio
save startup
but when i do a tc qdisc show the qdisc is fq_codel
ps: sorry for my english