[quote="Mile-Lile"]Router/Version: Netgear R8000 (main router)
Kernel Version: Linux 4.4.302-st28 #8308 SMP Mon Nov 28 05:21:43 +06 2022 armv7l
Previous/Reset: No
Mode/Status: Working stable (up 8:1, IPv6 PD with dnsmasq used for RA (radvd disabled - old androids don't like it), mactelnet,
ssh, mDNS / Avahi, ksmbd with USB share, wl0 VHT80 ch.149, wl1 HT40 ch.9, wl2 VHT80 ch.52 regdomain Canada, WG Server with routed ipv6
Issues/Errors: None
My Netgear R8000 updated to r50936 std.
the wl0 VHT80, Channel option has only auto option. Any setting could be wrong?
Random reboot on both RT-AC88U and the E3000 multiple time per day. I had this on the RT-AC88U's already with all firmware i tested over the last 2-3 years. For the E3000 this is new. This happens much more often than before.
Switch ports on the RT-AC88U are still reversed. The useful NVRAM configuration is limited to 64k maximum (of the 128kb) and if this limit is exceeded the router will go crazy and configuration is failing (missing WLAN interfaces, very strange configuration issues). _________________ Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
HOME Wired Multicast ISP 4K TV Network Router/Version: R7000
File/Kernel: DD-WRT v3.0-r50963 std (11/28/22)
Kernel Version: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous/Reset: r50906 / No Reset, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: PuTTY & WinSCP SshHostKeys needed Resetting / none
Services Used: Multicast,IGMP,CTF,SSH,Syslog
Services Disabled: FA,WiFi,QoS,ttraff,Telnet,NAS,Samba
Running for over 71 hours.
OffSite #1 Router/Version: R7000
File/Kernel: DD-WRT v3.0-r50963 std (11/28/22)
Kernel Version: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous/Reset: r50906 / No Reset, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: PuTTY & WinSCP SshHostKeys needed Resetting / none
Services Used: CTF,DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6
Running for over 71 hours.
OffSite #2 Router/Version: R7000
File/Kernel: DD-WRT v3.0-r50963 std (11/28/22)
Kernel Version: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous/Reset: r50906 / No Reset, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: PuTTY & WinSCP SshHostKeys needed Resetting / none
Services Used: CTF,DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6
Running for over 28 hours.
Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum! _________________ Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r54203 Std k6.1
Off Site 1
R7000 - Gateway & WiFi & WireGuard - DDWRT r54079 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4
Off Site 2
R7000 - Gateway & WiFi - DDWRT r52330 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531
Posted: Sat Dec 03, 2022 20:57 Post subject: ASUS RT-AC68U & 2 x Linksys E2000
Asus RT-AC68U
Firmware: DD-WRT v3.0-r50963 std (11/28/22) - (previous r50927)
Kernel:Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
5Ghz (Mixed) with 80Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 3 days, 4:05
CPU Temperature: CPU 64.7 °C / WL0 44.8 °C / WL1 44.8 °C
Linksys E2000 (2 in use)
Firmware: DD-WRT v3.0-r50963 mega (11/28/22)- (previous r50927)
Kernel: Linux 4.4.302-st28 #20305 Mon Nov 28 06:02:32 +06 2022 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: > 3 days
CPU Temperature: WL0 50.2 °C / WL0 49.0 °C
All devices working as AP's each with individual 1Gb wired connections to main firewalls.
As always, thanks to BS and everyone else helping out
Joined: 26 Mar 2013 Posts: 1748 Location: Hung Hom, Hong Kong
Posted: Mon Dec 05, 2022 7:40 Post subject: DD-WRT BS build 50963 and Asus RT-N18U
Router/Version:Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r50963 std (11/28/22)
Kernel: Linux 4.4.302-st28 #8307 Mon Nov 28 05:13:03 +06 2022 armv7l
Previous: DD-WRT v3.0-r50906 std (11/18/22)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
Not 24/7; Not using SFE, CTF, STP, IPv6, VPN, VAP;
USB storage(/jffs, /opt); NAS (ksmbd, lighttpd);
WAN DNS disabled; DDNS (no-ip.com) OK;
DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
Entware core (CPU: armv71) installed without problem
}
Reset: No RESET during firmware upgrade
File:https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2022/11-28-2022-r50963/asus-rt-n18u/
Logs
Code:
# grep -i err /var/log/messages
Jan 1 08:00:12 rt-n18u kern.err kernel: [ 0.000132] smp_twd: clock not found -2
Jan 1 08:00:12 rt-n18u kern.err kernel: [ 2.078054] bcmsflash: found no supported devices
Jan 1 08:00:12 rt-n18u daemon.info mstpd[637]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 08:00:12 rt-n18u daemon.info mstpd[637]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 08:00:12 rt-n18u daemon.info mstpd[637]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
Jan 1 08:00:13 rt-n18u daemon.info mstpd[637]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 08:00:13 rt-n18u daemon.info mstpd[637]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan 1 08:00:24 rt-n18u local5.err ksmbd: [ksmbd-manager/1193]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec 5 15:32:25 rt-n18u kern.err kernel: [ 38.593227] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Dec 5 15:32:27 rt-n18u local5.err ksmbd: [ksmbd-manager/1193]: ERROR: WARNING: child process exited abnormally: 1194
Dec 5 15:32:27 rt-n18u local5.err ksmbd: [ksmbd-manager/1193]: ERROR: can't execute kill 1194: No such process
Dec 5 15:32:34 rt-n18u user.info : [lighttpd] : Error on startup, returncode 255
Dec 5 15:32:36 rt-n18u user.info : [lighttpd] : Error on startup, returncode 255
Dec 5 15:32:38 rt-n18u user.info : [unbound] : Error on startup, returncode 9
Dec 5 15:32:38 rt-n18u user.info : [unbound] : Error on startup, returncode 9
Router/Version: WNDR4500v2 21 File/Kernel: r50963
Previous/Reset: r48607/no reset
Mode/Status: OpenVPN client to DD-WRT OpenVPN server, Encrypt DNS, SNMP, SSH, Zabbix client, ftpd to USB dongle
Issues/Errors: Minor layout issue
See screenshot. Line 1-3 are server-related, line 4 is client-related, line 5 is the separator, and 6-7 are client-related.
Previously, it was: Line 1 server-related, line 2 separator, line 3-4 server-related, line 5 blanks spacer, line 6 client-related, line 7 separator, and 8-9 client-related.
The layout issue appears to be consistent across the various chipsets.
Router/Version: Linksys EA6900
File/Kernel: r50963
Previous/Reset: r50357/no reset
Mode/Status: Issues
Issues/Errors: I recently migrated to 500Mbts and just cant get it all using this and the previous FW.
I ran iperf3 -s on the router and iperf3.exe -c 192.168.1.1 -b1000M -P20 on my machine.
I am getting in avg:
[SUM] 0.00-10.00 sec 285 MBytes 239 Mbits/sec sender
[SUM] 0.00-10.00 sec 282 MBytes 237 Mbits/sec receiver
Network advises gigabit network. If I connect the modem directly to my PC, I can get the proper velocity.
Any ideas?
, IPv6 PD with dnsmasq used for RA (radvd disabled - old androids don't like it), mactelnet,
