New Build - 11/28/2022 - r50963

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page Previous  1, 2, 3, 4  Next
Author Message
wirevpn
DD-WRT Novice


Joined: 09 Nov 2022
Posts: 8

PostPosted: Thu Dec 01, 2022 1:01    Post subject: Reply with quote
[quote="Mile-Lile"]Router/Version: Netgear R8000 (main router)
Kernel Version: Linux 4.4.302-st28 #8308 SMP Mon Nov 28 05:21:43 +06 2022 armv7l
Previous/Reset: No
Mode/Status: Working stable (up 8:1Cool, IPv6 PD with dnsmasq used for RA (radvd disabled - old androids don't like it), mactelnet,
ssh, mDNS / Avahi, ksmbd with USB share, wl0 VHT80 ch.149, wl1 HT40 ch.9, wl2 VHT80 ch.52 regdomain Canada, WG Server with routed ipv6
Issues/Errors: None

My Netgear R8000 updated to r50936 std.
the wl0 VHT80, Channel option has only auto option. Any setting could be wrong?



5g.jpg
 Description:
 Filesize:  33.04 KB
 Viewed:  2942 Time(s)

5g.jpg


Sponsor
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade

PostPosted: Thu Dec 01, 2022 7:07    Post subject: Reply with quote
probably some config error...



portsup
DD-WRT User


Joined: 20 Oct 2018
Posts: 210

PostPosted: Thu Dec 01, 2022 13:23    Post subject: Reply with quote
Router/Version: r7000
File/Kernel:
Previous/Reset: r50841 no reset
Mode/Status:
Issues/Errors: no running well
LiloBzH
DD-WRT Novice


Joined: 17 Apr 2017
Posts: 37

PostPosted: Fri Dec 02, 2022 10:30    Post subject: Reply with quote
ho1Aetoo wrote:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=333334&start=0

The host key of the router has changed.
The router must be deleted from the "known_hosts".


ok, it's ok now.

i deleted : HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\SshHostKeys

thank you !

_________________

Netgear R7000 :

#1 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP Off / IPv4 only / VAP Off & Wifi 2.4 / 5Ghz
#2 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP On / IPv4 & IPv6 / VAP On & Wifi 2.4 / 5Ghz & Isolated Guest Network
mj666
DD-WRT User


Joined: 26 Nov 2010
Posts: 58

PostPosted: Fri Dec 02, 2022 14:49    Post subject: Reply with quote
Random reboot on both RT-AC88U and the E3000 multiple time per day. I had this on the RT-AC88U's already with all firmware i tested over the last 2-3 years. For the E3000 this is new. This happens much more often than before.

Switch ports on the RT-AC88U are still reversed. The useful NVRAM configuration is limited to 64k maximum (of the 128kb) and if this limit is exceeded the router will go crazy and configuration is failing (missing WLAN interfaces, very strange configuration issues).

_________________
Asus AC-RT88U (Gateway, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT88U (AP, asus_rt-ac88u-firmware_52459.trx)
Asus AC-RT68U (AP, asus_rt-ac68u-firmware_52459.trx)
Asus AC-RT66U (AP, dd-wrt-52459-Asus_RT-AC66U.trx)
Linksys E3000 (AP, dd-wrt.v24-52459_NEWD-2_K3.x_mega-e3000.bin)
Linksys E4200 V2 (openwrt-18.06.5-kirkwood-linksys_viper-squashfs-sysupgrade.bin) not used at the moment
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1848
Location: Canada

PostPosted: Fri Dec 02, 2022 17:21    Post subject: Reply with quote
HOME Wired Multicast ISP 4K TV Network
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r50963 std (11/28/22)
Kernel Version: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous/Reset: r50906 / No Reset, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: PuTTY & WinSCP SshHostKeys needed Resetting / none
Services Used: Multicast,IGMP,CTF,SSH,Syslog
Services Disabled: FA,WiFi,QoS,ttraff,Telnet,NAS,Samba

Running for over 71 hours.

OffSite #1
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r50963 std (11/28/22)
Kernel Version: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous/Reset: r50906 / No Reset, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: PuTTY & WinSCP SshHostKeys needed Resetting / none
Services Used: CTF,DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6

Running for over 71 hours.

OffSite #2
Router/Version: R7000
File/Kernel: DD-WRT v3.0-r50963 std (11/28/22)
Kernel Version: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous/Reset: r50906 / No Reset, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: PuTTY & WinSCP SshHostKeys needed Resetting / none
Services Used: CTF,DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6

Running for over 28 hours.

Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r53562 Std k4.9

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r54517 Std
E3000 - Station Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r54517 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Sat Dec 03, 2022 13:43    Post subject: Reply with quote
Router Model: Linksys E2000 (converted N320)

Firmware Version: DD-WRT v3.0-r50963 mega (11/28/22)
Kernel Version: Linux 4.4.302-st28 #20305 Mon Nov 28 06:02:32 +06 2022 mips

Upgraded: from DD-WRT v3.0-r49792 mega (08/20/22)
Reset: No not this time

Status: Up and running for 8 hours, basic setup as Gateway, static leases, Wifi 2,4GHz working.

Errors: No, Seems like a good build,

Big Thanks to the devs!!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Newbrain
DD-WRT User


Joined: 28 Dec 2013
Posts: 171

PostPosted: Sat Dec 03, 2022 20:57    Post subject: ASUS RT-AC68U & 2 x Linksys E2000 Reply with quote
Asus RT-AC68U
Firmware: DD-WRT v3.0-r50963 std (11/28/22) - (previous r50927)
Kernel:Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
5Ghz (Mixed) with 80Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz & 5Ghz: Ok
Reset: No
Status: Ok
Uptime: 3 days, 4:05
CPU Temperature: CPU 64.7 °C / WL0 44.8 °C / WL1 44.8 °C

Linksys E2000 (2 in use)
Firmware: DD-WRT v3.0-r50963 mega (11/28/22)- (previous r50927)
Kernel: Linux 4.4.302-st28 #20305 Mon Nov 28 06:02:32 +06 2022 mips
2.4Ghz (NG-mixed) with 40Mhz channel width: Ok
SSH: Ok
Telnet: Disabled
Site Survey: Ok
Wi-viz Survey 2.4Ghz: Ok
Reset: No
Status: Ok
Uptime: > 3 days
CPU Temperature: WL0 50.2 °C / WL0 49.0 °C

All devices working as AP's each with individual 1Gb wired connections to main firewalls.

As always, thanks to BS and everyone else helping out Cool
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1855
Location: Hung Hom, Hong Kong

PostPosted: Mon Dec 05, 2022 7:40    Post subject: DD-WRT BS build 50963 and Asus RT-N18U Reply with quote
Router/Version: Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r50963 std (11/28/22)
Kernel: Linux 4.4.302-st28 #8307 Mon Nov 28 05:13:03 +06 2022 armv7l
Previous: DD-WRT v3.0-r50906 std (11/18/22)
Mode: WAN @ DHCP, Wireless @ AP (Mixed)
Status: Working {
  Not 24/7; Not using SFE, CTF, STP, IPv6, VPN, VAP;
  USB storage(/jffs, /opt); NAS (ksmbd, lighttpd);
  WAN DNS disabled; DDNS (no-ip.com) OK;
  DNSmasq not serving DNS; Recursive DNS Unbound (/jffs/etc/unbound.conf);
  Entware core (CPU: armv71) installed without problem
}
Reset: No RESET during firmware upgrade
File: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2022/11-28-2022-r50963/asus-rt-n18u/

Logs

Code:
# grep -i err /var/log/messages

Jan  1 08:00:12 rt-n18u kern.err kernel: [    0.000132] smp_twd: clock not found -2
Jan  1 08:00:12 rt-n18u kern.err kernel: [    2.078054] bcmsflash: found no supported devices
Jan  1 08:00:12 rt-n18u daemon.info mstpd[637]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan  1 08:00:12 rt-n18u daemon.info mstpd[637]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan  1 08:00:12 rt-n18u daemon.info mstpd[637]: error, CTL_set_msti_bridge_config: Couldn't find bridge with index 8
Jan  1 08:00:13 rt-n18u daemon.info mstpd[637]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan  1 08:00:13 rt-n18u daemon.info mstpd[637]: error, CTL_set_cist_bridge_config: Couldn't find bridge with index 8
Jan  1 08:00:24 rt-n18u local5.err ksmbd: [ksmbd-manager/1193]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory
Dec  5 15:32:25 rt-n18u kern.err kernel: [   38.593227] hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19)
Dec  5 15:32:27 rt-n18u local5.err ksmbd: [ksmbd-manager/1193]: ERROR: WARNING: child process exited abnormally: 1194
Dec  5 15:32:27 rt-n18u local5.err ksmbd: [ksmbd-manager/1193]: ERROR: can't execute kill 1194: No such process
Dec  5 15:32:34 rt-n18u user.info : [lighttpd] : Error on startup, returncode 255
Dec  5 15:32:36 rt-n18u user.info : [lighttpd] : Error on startup, returncode 255
Dec  5 15:32:38 rt-n18u user.info : [unbound] : Error on startup, returncode 9
Dec  5 15:32:38 rt-n18u user.info : [unbound] : Error on startup, returncode 9


Code:
~# grep -i -E 'eth|wl0|ctf|fire|aux' /var/log/messages

Jan  1 08:00:12 rt-n18u kern.info kernel: [    0.151773] L310: cache controller enabled 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x7a130000
Jan  1 08:00:12 rt-n18u kern.notice kernel: [    2.973797] Bridge firewalling registered
Jan  1 08:00:12 rt-n18u kern.warn kernel: [    7.914854] ctf_init:2843 05:13:20 Nov 28 2022 CTF version 1.0 loaded
Jan  1 08:00:12 rt-n18u kern.info kernel: [    8.093869] attach ctf for eth%d
Jan  1 08:00:12 rt-n18u kern.info kernel: [    8.097089] _ctf_attach:attach eth%d
Jan  1 08:00:12 rt-n18u kern.info kernel: [    8.100678] bind ctf to eth if
Jan  1 08:00:12 rt-n18u kern.warn kernel: [    8.115559] eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 7.14.164.18 (r692288)
Jan  1 08:00:12 rt-n18u kern.info kernel: [   10.934143] _ctf_attach:attach wl0
Jan  1 08:00:12 rt-n18u kern.warn kernel: [   10.941027] eth1: Broadcom BCM4360 802.11 Wireless Controller 7.14.164.18 (r692288)
Jan  1 08:00:12 rt-n18u kern.warn kernel: [   11.154569] eth0: mixed HW and IP checksum settings.
Jan  1 08:00:13 rt-n18u kern.info kernel: [   13.284373] device eth0 entered promiscuous mode
Jan  1 08:00:13 rt-n18u user.info : [bridge] : interface eth1 successfully added to bridge br0
Jan  1 08:00:13 rt-n18u kern.info kernel: [   13.770162] device eth1 entered promiscuous mode
Jan  1 08:00:13 rt-n18u kern.info kernel: [   13.775101] br0: port 2(eth1) entered forwarding state
Jan  1 08:00:13 rt-n18u kern.info kernel: [   13.780481] br0: port 2(eth1) entered forwarding state
Jan  1 08:00:18 rt-n18u user.notice root: changmw[1015]: starting /tmp/.rc_firewall
Jan  1 08:00:18 rt-n18u daemon.warn dnsmasq[1022]: warning: interface eth1 does not currently exist
Jan  1 08:00:19 rt-n18u user.notice root: changmw[1015]: exiting /tmp/.rc_firewall
Jan  1 08:00:19 rt-n18u kern.info kernel: [   19.982202] CTF: disabled
Jan  1 08:00:28 rt-n18u kern.info kernel: [   28.802308] br0: port 2(eth1) entered forwarding state
Jan  1 08:00:29 rt-n18u daemon.warn dnsmasq[1378]: warning: interface eth1 does not currently exist
Jan  1 08:00:31 rt-n18u user.notice root: changmw[1495]: starting /tmp/.rc_firewall
Jan  1 08:00:32 rt-n18u user.notice root: changmw[1495]: exiting /tmp/.rc_firewall
Dec  5 15:32:22 rt-n18u user.notice root: changmw[1839]: starting /tmp/.rc_firewall
Dec  5 15:32:22 rt-n18u user.info : [nas] : start nas for wl0
Dec  5 15:32:22 rt-n18u user.info : [nas] : NAS lan (wl0 interface) successfully started
Dec  5 15:32:23 rt-n18u user.notice root: changmw[1839]: exiting /tmp/.rc_firewall
Dec  5 15:32:23 rt-n18u user.info : [nas] : start nas for wl0
Dec  5 15:32:23 rt-n18u user.info : [nas] : NAS lan (wl0 interface) successfully started


Speed

Code:
~# /opt/bin/speedtest --ca-certificate=/etc/ssl/ca-bundle.crt

Speedtest by Ookla

      Server: Suniway Telecom - Hong Kong (id: 43092)
         ISP: Hong Kong Broadband Network
Idle Latency:     1.70 ms   (jitter: 0.04ms, low: 1.63ms, high: 1.76ms)
    Download:    93.92 Mbps (data used: 45.9 MB)
                  9.97 ms   (jitter: 0.95ms, low: 7.15ms, high: 12.61ms)
      Upload:    93.83 Mbps (data used: 42.4 MB)
                 11.17 ms   (jitter: 2.72ms, low: 5.60ms, high: 20.76ms)
 Packet Loss:     0.0%
  Result URL: https://www.speedtest.net/result/c/3582b221-f943-43d0-baaa-fea20d4f6cd4

_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw


Last edited by mwchang on Tue Dec 06, 2022 12:51; edited 1 time in total
plawer
DD-WRT User


Joined: 11 Aug 2019
Posts: 156

PostPosted: Mon Dec 05, 2022 23:03    Post subject: Reply with quote
Router/Version: WNDR4500v2 7
File/Kernel: r50963
Previous/Reset: r50313/no reset
Mode/Status: OpenVPN client, SNMP, SSH, Zabbix client, VLAN, no Wifi (delivered by other routers)
Issues/Errors: Odd warning with OpenVPN against ProtonVPN

Dec 5 22:26:52 XXXX daemon.warn openvpn[2656]: WARNING: 'auth' is used inconsistently, local='auth [null-digest]', remote='auth SHA512'

root@XXXX:~# cat /tmp/openvpncl/openvpn.conf
[...]
auth sha512
[...]



vpn.png
 Description:
 Filesize:  7.87 KB
 Viewed:  2275 Time(s)

vpn.png



_________________
Linksys: Several WRTxx00AC variations | Netgear: 4x WNDR4500v2, 7x WNDR4300, R6400v1 | Asus: 2x RT-AC66U | Gl.inet: 3x GL-AR150
plawer
DD-WRT User


Joined: 11 Aug 2019
Posts: 156

PostPosted: Mon Dec 05, 2022 23:12    Post subject: Reply with quote
Router/Version: WNDR4500v2 (x2) 6
File/Kernel: r50963
Previous/Reset: r50313/no reset
Mode/Status: OpenVPN client, SNMP, SSH, Zabbix client, VLAN, no Wifi (delivered by other routers)
Issues/Errors: None

_________________
Linksys: Several WRTxx00AC variations | Netgear: 4x WNDR4500v2, 7x WNDR4300, R6400v1 | Asus: 2x RT-AC66U | Gl.inet: 3x GL-AR150
plawer
DD-WRT User


Joined: 11 Aug 2019
Posts: 156

PostPosted: Mon Dec 05, 2022 23:59    Post subject: Reply with quote
Router/Version: RT-AC66U 19
File/Kernel: r50963
Previous/Reset: r50313/no reset
Mode/Status: 3 bridges/VAP/VLAN, Encrypt DNS, SNMP, SSH, Zabbix client, OpenVPN server, OpenVPN client with PBR to DD-WRT OpenVPN server, ftpd to USB dongle
Issues/Errors: None

_________________
Linksys: Several WRTxx00AC variations | Netgear: 4x WNDR4500v2, 7x WNDR4300, R6400v1 | Asus: 2x RT-AC66U | Gl.inet: 3x GL-AR150
plawer
DD-WRT User


Joined: 11 Aug 2019
Posts: 156

PostPosted: Tue Dec 06, 2022 0:31    Post subject: Reply with quote
Router/Version: WNDR4500v2 21
File/Kernel: r50963
Previous/Reset: r48607/no reset
Mode/Status: OpenVPN client to DD-WRT OpenVPN server, Encrypt DNS, SNMP, SSH, Zabbix client, ftpd to USB dongle
Issues/Errors: Minor layout issue

See screenshot. Line 1-3 are server-related, line 4 is client-related, line 5 is the separator, and 6-7 are client-related.

Previously, it was: Line 1 server-related, line 2 separator, line 3-4 server-related, line 5 blanks spacer, line 6 client-related, line 7 separator, and 8-9 client-related.

The layout issue appears to be consistent across the various chipsets.



vpn2.png
 Description:
 Filesize:  6.51 KB
 Viewed:  2254 Time(s)

vpn2.png



_________________
Linksys: Several WRTxx00AC variations | Netgear: 4x WNDR4500v2, 7x WNDR4300, R6400v1 | Asus: 2x RT-AC66U | Gl.inet: 3x GL-AR150
plawer
DD-WRT User


Joined: 11 Aug 2019
Posts: 156

PostPosted: Tue Dec 06, 2022 15:59    Post subject: Reply with quote
This was a configuration glitch and has been resolved.

plawer wrote:
Router/Version: WNDR4500v2 7
File/Kernel: r50963
Previous/Reset: r50313/no reset
Mode/Status: OpenVPN client, SNMP, SSH, Zabbix client, VLAN, no Wifi (delivered by other routers)
Issues/Errors: Odd warning with OpenVPN against ProtonVPN

Dec 5 22:26:52 XXXX daemon.warn openvpn[2656]: WARNING: 'auth' is used inconsistently, local='auth [null-digest]', remote='auth SHA512'

root@XXXX:~# cat /tmp/openvpncl/openvpn.conf
[...]
auth sha512
[...]

_________________
Linksys: Several WRTxx00AC variations | Netgear: 4x WNDR4500v2, 7x WNDR4300, R6400v1 | Asus: 2x RT-AC66U | Gl.inet: 3x GL-AR150
joaoptc
DD-WRT User


Joined: 28 Oct 2014
Posts: 57

PostPosted: Wed Dec 07, 2022 16:26    Post subject: Reply with quote
Router/Version: Linksys EA6900
File/Kernel: r50963
Previous/Reset: r50357/no reset
Mode/Status: Issues
Issues/Errors: I recently migrated to 500Mbts and just cant get it all using this and the previous FW.
I ran iperf3 -s on the router and iperf3.exe -c 192.168.1.1 -b1000M -P20 on my machine.
I am getting in avg:
[SUM] 0.00-10.00 sec 285 MBytes 239 Mbits/sec sender
[SUM] 0.00-10.00 sec 282 MBytes 237 Mbits/sec receiver

Network advises gigabit network. If I connect the modem directly to my PC, I can get the proper velocity.
Any ideas?
Goto page Previous  1, 2, 3, 4  Next Display posts from previous:    Page 2 of 4
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum