New Build - 11/28/2022 - r50963

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2, 3, 4  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Mon Nov 28, 2022 10:25    Post subject: New Build - 11/28/2022 - r50963 Reply with quote
Welcome to Broadcom r50963 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50927 (mirror)

OpenVPN 2.5.8: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
mDNS/Avahi FR inadyn Dropbear p910nd BOINC zlib SmartDNS ZFS MAC-Telnet mac80211 dnsmasq Plex autoburst kernels
In-kernel SMB (ksmbd/tools 3.4.6/3.4.5): guest user is selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• Major update to inadyn: Dynamic DNS client with SSL/TLS support. Please reconfigure also test new DD-WRT beta releases!
• SSH keygen/download, OpenVPN server Export Client Configuration features by egc! Import/parse client configs by eibgrad!

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Mon Nov 28, 2022 12:13    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r50963) / Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50927 std (11/21/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + SSH (public key) + DDNS (Dynu.com) + USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
Mile-Lile
DD-WRT Guru


Joined: 24 Feb 2013
Posts: 1634
Location: Belgrade

PostPosted: Mon Nov 28, 2022 12:28    Post subject: Reply with quote
Router/Version: Netgear R8000 (main router)
Kernel Version: Linux 4.4.302-st28 #8308 SMP Mon Nov 28 05:21:43 +06 2022 armv7l
Previous/Reset: No
Mode/Status: Working stable (up 8:1Cool, IPv6 PD with dnsmasq used for RA (radvd disabled - old androids don't like it), mactelnet,
ssh, mDNS / Avahi, ksmbd with USB share, wl0 VHT80 ch.149, wl1 HT40 ch.9, wl2 VHT80 ch.52 regdomain Canada, WG Server with routed ipv6
Issues/Errors: None


Router/Version: Netgear R6250 (Station)
Kernel Version: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous/Reset: No
Mode/Status: Working stable (up 8:29), basic functions as station
Issues/Errors: None
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 289
Location: Maryland, United States

PostPosted: Mon Nov 28, 2022 14:39    Post subject: Reply with quote
Router/Version: Netgear R7000P
Firmware Version: DD-WRT v3.0-r50963 std (11/28/22)
Kernel Version: Linux 4.4.302-st28 #8309 SMP Mon Nov 28 05:28:56 +06 2022 armv7l
Previous/Reset: r50927 / no reset
Mode/Status: Gateway / Working
Issues/Errors: None
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Mon Nov 28, 2022 14:46    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r50963M Community Build (11/28/22)
Kernel Version: Linux 4.4.302-st28 #1 SMP Mon Nov 28 14:01:01 CET 2022 armv7l

Upgraded from: DD-WRT v3.0-r50841M Community Build (11/09/22)
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, 2.4 GHz with unbridged VAP and 5 GHz.
Throughput testing is the same as reported at: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=333373&start=3
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.

Errors: Nothing encountered yet.

Big Thanks to BS and other forum members and developers.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
LiloBzH
DD-WRT Novice


Joined: 17 Apr 2017
Posts: 37

PostPosted: Mon Nov 28, 2022 21:23    Post subject: Reply with quote
Hi

Router Model: R7000
Kernel Version: DD-WRT v3.0-r50963 std

Upgraded from: DD-WRT v3.0-r50551 std
No reset - Upgrade in GUI

Errors: no in log but issue with IPV4 connectivity.

Test with 2 Netgear R7000 (cf signature)

Same problem :
After upgrade and reboot, i lost IPV4 connectivity. NO IPV4 in netgear.
After new reboot (electric), IPV4 OK (in GUI and with an IFCONFIG) but SSH seems to be broken in IPV4. i can connect on SSH with IPV6

Rollback to : v3.0-r50551 => SSH OK in IPV4

_________________

Netgear R7000 :

#1 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP Off / IPv4 only / VAP Off & Wifi 2.4 / 5Ghz
#2 - DD-WRT v3.0-r50551 std (10/19/22) - running since 11/28/22 - DHCP On / IPv4 & IPv6 / VAP On & Wifi 2.4 / 5Ghz & Isolated Guest Network
RC1980
DD-WRT Novice


Joined: 29 Nov 2022
Posts: 2

PostPosted: Tue Nov 29, 2022 2:04    Post subject: Reply with quote
Router/Version: DLink DIR-885L
File/Kernel: r50963
Previous/Reset: no
Mode/Status: Repeater
Issues/Errors: Problemas com distribuição de IPs e baixa performance do wi-fi / Some bugs

Using the repeater mode, I faced problems such as failure in the ip distribution in the 5G network when restarting, it is only corrected when restarting again. I also had a problem with the ip on the network cable, having to wait a few precious minutes. The cable performance is great, the speed is 500Mbps, practically the available speed, but the wifi suffers on the 5G network, obtaining 290Mbps. In the 2.4G network the speed is great, 122Mbps.
I know that Broadcom ARM heats up a lot, but I think 75°C is worrying. Or is it normal?
Can experimental drivers be used normally?
Sorry to go into this subject here, it lacks detailed and easily accessible information
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 889

PostPosted: Tue Nov 29, 2022 8:47    Post subject: Reply with quote
LiloBzH wrote:
Hi

Router Model: R7000
Kernel Version: DD-WRT v3.0-r50963 std

Upgraded from: DD-WRT v3.0-r50551 std
No reset - Upgrade in GUI

Errors: no in log but issue with IPV4 connectivity.

Test with 2 Netgear R7000 (cf signature)

Same problem :
After upgrade and reboot, i lost IPV4 connectivity. NO IPV4 in netgear.
After new reboot (electric), IPV4 OK (in GUI and with an IFCONFIG) but SSH seems to be broken in IPV4. i can connect on SSH with IPV6

Rollback to : v3.0-r50551 => SSH OK in IPV4


I updated my R7000 to this build yesterday evening. No issues with IPV4. There seems to be a problem with SSH though.

_________________
Netgear R7000 on Build 55109
Asus AC-AC68U rev. C1 (AP) on Build 55109
Asus AC-68U rev. A1 on Build 54604
Asus AC-68U rev. A1 on Build 53339
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 2927
Location: Germany

PostPosted: Tue Nov 29, 2022 8:51    Post subject: Reply with quote
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=333334&start=0

The host key of the router has changed.
The router must be deleted from the "known_hosts".
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Tue Nov 29, 2022 8:53    Post subject: Reply with quote
If you have trouble connecting with SSH then download the latest Putty and make sure under SSH/Host keys to move ed25519 to the top and untick "Prefer Algorithms for which a host key is known" or forget/remove the HOST keys.

If you have trouble connecting with WinSCP under Tools/Clean up Clear Cache

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 733

PostPosted: Tue Nov 29, 2022 10:48    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-50963_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r50963 big (11/28/22) (prev. DD-WRT v3.0-r50906 big (11/18/22))
Kernel: Linux 4.4.302-st28 #20301 Mon Nov 28 05:55:52 +06 2022 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed a few hours ago, ok.
PeteSL
DD-WRT User


Joined: 01 May 2007
Posts: 98

PostPosted: Tue Nov 29, 2022 12:21    Post subject: Reply with quote
Router/Version: Asus RT-AC3100
File/Kernel: asus_rt-ac3100-firmware.trx/Linux 4.4.302-st28 #8308 SMP Mon Nov 28 05:21:43 +06 2022 armv7l
Previous/Reset: 50927/No
Mode/Status: Gateway;NAT;CTF;uPNP;SNMP;AP-2,5GHz;Wireguard S-S Client;No DHCP,DNS;Custom NTP
Issues/Errors: Switch ports reversed;otherwise none

This was upgraded via GUI.
mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1855
Location: Hung Hom, Hong Kong

PostPosted: Tue Nov 29, 2022 12:33    Post subject: Reply with quote
LiloBzH wrote:
Router Model: R7000
Kernel Version: DD-WRT v3.0-r50963 std
Upgraded from: DD-WRT v3.0-r50551 std
No reset - Upgrade in GUI

Errors: no in log but issue with IPV4 connectivity.

Test with 2 Netgear R7000 (cf signature)

Same problem :
After upgrade and reboot, i lost IPV4 connectivity. NO IPV4 in netgear.
After new reboot (electric), IPV4 OK (in GUI and with an IFCONFIG) but SSH seems to be broken in IPV4. i can connect on SSH with IPV6

Rollback to : v3.0-r50551 => SSH OK in IPV4

Newer builds changed the host key which is based on ED25519 instead of RSA. You need to download the new host keys by removing the old entry in your client's ~/.ssh/known_hosts file.

_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw
belegdol
DD-WRT Novice


Joined: 07 Jun 2020
Posts: 35
Location: Germany

PostPosted: Tue Nov 29, 2022 16:19    Post subject: Reply with quote
Router/Version: Netgear R6300v1
File/Kernel: dd-wrt.v24-50963_NEWD-2_K3.x_giga-R6300.bin/Linux 4.4.302-st28
Previous/Reset: 50671/no reset
Mode/Status: AP/switch
Issues/Errors: none
This version works fine, as opposed to r50927, which resulted in a blinking power LED and needing to revert to 50671: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1276281#1276281.
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 425
Location: Ottawa, Ontario, Canada

PostPosted: Wed Nov 30, 2022 13:50    Post subject: Reply with quote
Firmware: v3.0-r50963 std (11/28/22)
Router/Version: Netgear R7000
Kernel: Linux 4.4.302-st28 #8303 SMP Mon Nov 28 04:43:02 +06 2022 armv7l
Previous: v3.0-r50906 std (11/18/22)
Mode/Status: AP wired and wireless / Up and running for 2 days
Reset: Power-off boot before and soft boot after upgrade
Temperatures: CPU 60.2 °C / WL0 46.3 °C / WL1 51.2 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325). Wink

Upload and Download speeds are to ISP spec (500/500 Mbps).

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Goto page 1, 2, 3, 4  Next Display posts from previous:    Page 1 of 4
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum