Router/Version: Asus RT-N66R
File/Kernel: DD-WRT v3.0-r50906 big (11/18/22) Linux 4.4.302-st25 #20157 Fri Nov 18 03:57:35 +06 2022 mips
Previous/Reset: 50841 no reset
Mode/Status: Gateway
Issues/Errors: No issues so far, still need to transfer a large file for testing
Uptime: 1 day, 2:01
Router/Version: Netgear WNDR4500v2
File/Kernel: DD-WRT v3.0-r50906 giga (11/18/22) Linux 4.4.302-st25 #20141 Fri Nov 18 03:32:34 +06 2022 mips
Previous/Reset: 50841 no reset
Mode/Status: Router
Issues/Errors: Transfered a 4Gb file wirelessly and no reboot so far
Uptime: 1 day, 3:44
Except for testing the large file tranfer on the N66R all seem to be working well so far. I will update this post once I have tested the N66R on large wireless transfers. _________________ Asus RT-N66R 50841 big
Netgear WNDR4500v2 50841 mega
Best build so far. The last few builds Samba directory listing has been quite slow though it has improved dramatically with this build. I am getting the error in the log since the last several builds still of
"DD-WRT local5.err ksmbd: [ksmbd-manager/1208]: ERROR: Can't open `/tmp/ksmbd.subauth': No such file or directory "
Router/Version: Asus RT-N66U
File: dd-wrt.v24-50906_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r50906 big (11/18/22) (prev. DD-WRT v3.0-r50841 big (11/09/22))
Kernel: Linux 4.4.302-st25 #20157 Fri Nov 18 03:57:35 +06 2022 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed at release, ok.
Router model/revision: Netgear r6700v3
Firmware Version/File: DD-WRT v3.0-r50906 std (11/18/22), netgear-r6700v3-webflash.bin
Operating/Wireless modes: AP/Router, 2.4 and 5GHZ working, sshd(dropbear)
Reset: Yes (upgraded from 2019 version)
Errors: Could not connect via dropbear until commenting out old host key in ~/.ssh/known_hosts.
Started dropbear with debugging. With old known_hosts, it segfault'ed. After commenting it out, it succeeded:
Code:
dropbear -F -E -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_ed2
5519_key -p 22
[2232] Nov 23 20:06:33 Not backgrounding
[2235] Nov 23 20:06:36 Child connection from 192.168.XXX.XXX:60223
Aiee, segfault! You should probably report this as a bug to the developer
[2347] Nov 23 20:11:57 Child connection from 192.168.XXX.XXX:60683
Aiee, segfault! You should probably report this as a bug to the developer
[2367] Nov 23 20:12:22 Child connection from 192.168.XXX.XXX:60693
[2367] Nov 23 20:12:29 Pubkey auth succeeded for 'root' with ssh-rsa key SHA256:XXXXXXXXXXXXXXXXXXXX from 192.168.XXX.XXX:60693
Joined: 26 Mar 2013 Posts: 1858 Location: Hung Hom, Hong Kong
Posted: Sat Nov 26, 2022 16:16 Post subject:
Mucee wrote:
Started dropbear with debugging. With old known_hosts, it segfault'ed. After commenting it out, it succeeded:
[code]dropbear -F -E -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_ed2
5519_key -p 22
Because the host key was changed! You have to download the new host key. You can keep the old host key if necessary, outside of C:\Users\YourName\.ssh\known_hosts if host IPs are the same.
It's normal, not a bug. Some SSH clients can ignore host keys.
I usually just delete known_hosts and re-download all host keys. _________________ Router: Asus RT-N18U (rev. A1)
Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!