the flash process seemed to go until the end fine, showed it was going to reboot, and after reboot it lights up the power light, then all lights go up and all lights go down and seems it restarts, and goes like this in loop.
yes, like i mentioned, if followed the procedure on the wiki to serve the original firmware via tftp but still no go. _________________ Netgear R9000
DD-WRT v3.0-r55109 std (02/27/24)
Router, AP, WDS, VAPs, SFE off
Firewall / NAT / VLANs
DNS / DHCP / DDNS / SSH / NTP / Syslog / Cron
Wireguard / OpenVPN
USB Storage / Entware (LIGHTTPD & TFTPD)
2.4GHz: Vanilla, N/G, VHT40, LDPC, Disassoc Low ACK, Short Preamble, Short GI, Airtime Fairness, WMM, ACK Timing 500, WPA2 (AES), WPA2 ENTP (AES)
5GHz: DD-WRT, AC/N, VHT80, Disass Low ACK, Shrt Preamble/GI, Singl Beamforming, Airt Fairness, WMM, ACK Time 500, WPA2(AES), WPA2 ENTP(AES)
Joined: 20 Oct 2009 Posts: 44 Location: Czech Republic
Posted: Fri Nov 25, 2022 16:45 Post subject:
I fixed the issue, for some reason serving the firmware via tftp using linux tftp server doesn't work. I did now using tftpd64 on Windows and it downloaded the original firmware and the router its working fine now. _________________ Netgear R9000
DD-WRT v3.0-r55109 std (02/27/24)
Router, AP, WDS, VAPs, SFE off
Firewall / NAT / VLANs
DNS / DHCP / DDNS / SSH / NTP / Syslog / Cron
Wireguard / OpenVPN
USB Storage / Entware (LIGHTTPD & TFTPD)
2.4GHz: Vanilla, N/G, VHT40, LDPC, Disassoc Low ACK, Short Preamble, Short GI, Airtime Fairness, WMM, ACK Timing 500, WPA2 (AES), WPA2 ENTP (AES)
5GHz: DD-WRT, AC/N, VHT80, Disass Low ACK, Shrt Preamble/GI, Singl Beamforming, Airt Fairness, WMM, ACK Time 500, WPA2(AES), WPA2 ENTP(AES)
