Anyone with hardware experience of an Engenius EAP1300?

Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices
Author Message
usaf-lt-g
DD-WRT Novice


Joined: 16 Mar 2012
Posts: 43

PostPosted: Thu Nov 17, 2022 5:04    Post subject: Anyone with hardware experience of an Engenius EAP1300? Reply with quote
I'm looking for anyone who has experience with this access point. I have a set of 4 I bought off ebay, and every single one of them has set the setting to "disable the reset button" on the software end, and they no longer have the username and password. They labeled the IP configuration on them.... so joy, I can get to the login page. But I can't login and I can't factory reset the thing.

Wondering if anyone knows if there's a way to JTAG this. There's a 4 pin header that almost looks like a console port when I took them apart, but it's only 4 pins. I thought console ports were usually 9 pins?

I found an instruction on open-wrt that talks about connecting to the console port and TFTP'ing, but gives absolutely zero guidance on how to physically connect it to the PC.

Any help here would be immensely helpful. Thank you!
Sponsor
usaf-lt-g
DD-WRT Novice


Joined: 16 Mar 2012
Posts: 43

PostPosted: Thu Nov 17, 2022 6:02    Post subject: Reply with quote
Ok I was able to at least get in via a serial connection. There are bootup options I can choose. pressing 4 gets me to the command line. If I simply erased the boot loader ENV config would that work or am i bricking it if i do that?

Please choose the operation:
2: Load Linux System code then write to Flash via TFTP.
4: Entr boot command line interface.
6: Load Linux Kernel then write to Flash via TFTP.
7: Load Linux filesystem then write to Flash via TFTP.
8: Load Linux uboot then write to Flash via TFTP.
9: Load Boot Loader code then write to Flash via TFTP.
e: Erase Boot Loader ENV config.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12812
Location: Netherlands

PostPosted: Thu Nov 17, 2022 12:59    Post subject: Reply with quote
Moved to Senao forum, see the forum guidelines with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Senao Devices All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum