Posted: Sat Nov 12, 2022 21:23 Post subject: Help in SIP Account setup
I am unsuccessfully trying to get a Yuboto VOIP connection working.
I use the Flyingvoice FTA1101 Adapter which as I understand is running some VOIP version of DD-WRT.
My basic router is a Linksys WRT1900ACS.
My SIP account and relevant setup can be seen in the attached pics.
Testing making phone calls with a softphone (GS Wave android app) connected on the same Linksys router under the same Yuboto account worked OK.
I’ve got tired just wasting my time trying on this.
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Sat Nov 12, 2022 22:05 Post subject:
Good luck getting help with a 3rd Party piece of equipment that is not directly supported by this firmware.
The webUI of the device is definitely dated by the looks of it. I have contacted the lead developer.
Good luck getting help with a 3rd Party piece of equipment that is not directly supported by this firmware.
The webUI of the device is definitely dated by the looks of it. I have contacted the lead developer.
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Sun Nov 13, 2022 10:20 Post subject:
Not with that old firmware version you wont. And not even sure the backend for VOIP works anymore, We removed Milkfish which was defunct for one, We still have asterisk, But thats not available on your platform apparently
Joined: 08 May 2018 Posts: 14221 Location: Texas, USA
Posted: Sun Nov 13, 2022 12:28 Post subject: Re: Help in SIP Account setup
This isn't the WRT1900 in question. It's a 3rd-party device.
seneka21 wrote:
I am unsuccessfully trying to get a Yuboto VOIP connection working.
I use the Flyingvoice FTA1101 Adapter which as I understand is running some VOIP version of DD-WRT.
My basic router is a Linksys WRT1900ACS.
My SIP account and relevant setup can be seen in the attached pics.
Testing making phone calls with a softphone (GS Wave android app) connected on the same Linksys router under the same Yuboto account worked OK.
I’ve got tired just wasting my time trying on this.
I would be so thankful for any help.
The question is, is this device behind the WRT1900 or ahead of it? IOW, is this device between the ISP modem and the WRT1900 or not? Outside of that, we cannot support a 3rd-party developed firmware here unless the lead developer himself knows anything about it. Still no reply from him. _________________ "Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT Pogo - A minimal level of ability is expected and needed... DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)
----------------------
Linux User #377467 counter.li.org / linuxcounter.net
First of all I want to thank you once more for your time.
My setup goes as the attached picture below.
My problem is not with the Linksys Router but with the VOIP ATA indeed.
Port forwards may be required or placing the ATA's WAN IP in your WRT1900s DMZ. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Port forwards may be required or placing the ATA's WAN IP in your WRT1900s DMZ.
Thank you dale_gribble39 for the suggestion.
I will try.
In any case I can't understand why Softphone app "GS Wave" on my mobile which is connected to WRT1900s works fine without any port forwarding or DMZ or anything else.
Port forwards may be required or placing the ATA's WAN IP in your WRT1900s DMZ.
Thank you dale_gribble39 for the suggestion.
I will try.
In any case I can't understand why Softphone app "GS Wave" on my mobile which is connected to WRT1900s works fine without any port forwarding or DMZ or anything else.
Unfortunately, port forwarding didn't work either.
Posted: Mon Nov 14, 2022 11:52 Post subject: [SOLVED] Help in SIP Account setup
The solution was pretty simple and was provided by a Flyingvoice's technical assistant.
As is depicted in the attached pic (red rectangle), I should have put in "Phone Number" field, under SIP Account menu, my Voip account Username instead of my phone number.
Many thanks to all members for their time spent for my issue.