New Build - 11/06/2022 - r50814

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4700

PostPosted: Sun Nov 06, 2022 11:06    Post subject: New Build - 11/06/2022 - r50814 Reply with quote
Welcome to Atheros r50814 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50786 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
mDNS/Avahi FRR dnsmasq Zabbix zfs iperf3 FreeRADIUS irqbalance Unbound MC SmartDNS OpenSSL kernels inadyn radvd
In-kernel Samba (ksmbd 3.4.6): guest behavior is now selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Major update to inadyn: Dynamic DNS client with SSL/TLS support. Please reconfigure also test new DD-WRT beta releases!
SSH keygen/download, OpenVPN server Export Client Configuration features by egc! Import/parse client configs by eibgrad!

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 686

PostPosted: Sun Nov 06, 2022 12:02    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r50814) / Linux 4.9.331 #1334 SMP Sun Nov 6 05:03:00 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50786 std (11/02/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), SSH (public key), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2023): https://politepol.com/fd/bdQnjdZgyaln
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 List of reference threads, how-tos, and otherwise (Moderator's Pick 🌟)
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Sun Nov 06, 2022 12:09    Post subject: Reply with quote
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r50814 std (11/06/22)
Kernel Version Linux 4.9.331 #652 SMP Sat Oct 29 15:01:44 +07 2022 armv7l
Current Time Sun, 06 Nov 2022 05:01:15
Uptime 3 min
GUI over 50595
Reset: no
Issues: none

Looks like radvd is functioning correctly. IPv6 protocol is active!

Thank you BS & Devs
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 166
Location: Maharashtra, India

PostPosted: Sun Nov 06, 2022 13:07    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r50814 std (11/06/22)
Kernel: Linux 4.9.331 #1334 SMP Sun Nov 6 05:03:00 +07 2022 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using CLI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r50474 std (10/11/22)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, NTP TimeSync, WireGuard, Samba
Status: Stable, Working Fine ; running DD-WRT firmware type for 2.4ghz & 5ghz, uptime 1+ Hrs.

One observation since build 50500, anything added in additional options in Dnsmasq infrastructure are removed. Need to add them back.
writing new firmware with "write dd-wrt-webupgrade.bin linux &" command

though I had tried all build since 50500 except 50786, reverted back everytime to 50474.


Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.


Last edited by abhijitat on Sun Nov 06, 2022 13:10; edited 1 time in total
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 11172
Location: Netherlands

PostPosted: Sun Nov 06, 2022 13:08    Post subject: Reply with quote
Router Model: Netgear R7800

Firmware Version: DD-WRT v3.0-r50814 std (11/06/22)

Upgraded from: DD-WRT v3.0-r5786 std

Reset: No, not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, port forwarding DDNS, WOL 2,4GHz, VAP for IoT, 5Ghz (Vanilla Firmware, Disabled Airtime), DDNS (Inadyn) to freedns.afraid.org.
On demand governor with minimum 800 MHz

Errors: Nothing encountered yet

Thanks BS!

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 11172
Location: Netherlands

PostPosted: Sun Nov 06, 2022 13:35    Post subject: Reply with quote
Router Model: Linksys EA8500

Firmware Version: DD-WRT v3.0-r50814M Community Build by EGC (11/06/22)

Upgraded from: DD-WRT v3.0-r50484M Community Build by EGC (10/12/22)
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working.

Errors: Nothing encountered at this moment

Thanks BS!

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 843

PostPosted: Sun Nov 06, 2022 14:32    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r50814 std (11/06/22)
Previous/Reset: DD-WRT v3.0-r50786 std (11/02/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: Saw this in the logs:

Dec 31 19:00:23 LandiRouter kern.warn kernel: [ 2.304257] Total number of ECC bytes exceeded oobsize (ecc total 240, oobsize 64)
Dec 31 19:00:23 LandiRouter kern.warn kernel: [ 2.605760] READ DNI CMDLINE!
Dec 31 19:00:23 LandiRouter kern.warn kernel: [ 2.608720] dni_cmdline: Alpine nand flash:1920k(u-boot)ro,1152k(u-boot-env)ro,1280k(ART),1280k(ART.bak),4352k(k

_________________
Netgear R9000 X10
DD-WRT v3.0-r51506 std (01/25/23)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS
2.4GHz: VANILLA Firmware, Airtime Fairness Enabled, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: VANILLA Firmware, Airtime Fairness Enabled, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5983
Location: Texas

PostPosted: Sun Nov 06, 2022 14:43    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r50814 std (11/06/22)
Linux 4.9.331 #1332 SMP Sat Nov 5 18:15:26 +07 2022 armv7l
GUI install over r50786
all good

#

Netgear WNDR3700 V4
DD-WRT v3.0-r50814 std (11/06/22)
Linux 3.18.140-d6 #157286 Sun Nov 6 04:30:29 -00 2022 mips
GUI install over r50786
all good
ramblin
DD-WRT User


Joined: 03 Nov 2015
Posts: 255
Location: Florida, USA

PostPosted: Sun Nov 06, 2022 15:42    Post subject: Reply with quote
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r50814 std (11/06/22)
Kernel: Linux 4.9.331 #1332 SMP Sat Nov 5 18:15:26 +07 2022 armv7l
Reset: NO ... Upgraded from r50786
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: NONE

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r50814 std (11/06/22)
Kernel: Linux 4.9.331 #1332 SMP Sat Nov 5 18:15:26 +07 2022 armv7l
Reset: NO ... Upgraded from r50786
Mode: 2.4 GHz only ....Firmware type .. DD-WRT
Errors: NONE

Swift upgrades... No glinches ...Thanks DEVs

_________________
......All GOOD here... Just Handshakes and Time Stamps !......
Bajramo
DD-WRT User


Joined: 03 Jul 2010
Posts: 51

PostPosted: Sun Nov 06, 2022 16:12    Post subject: Reply with quote
Router/Version: Archer C7-v5
File/Kernel: tplink_archer-c7-v5.bin
Previous/Reset: r49599 / yes
Mode/Status: Gateway/AP
Issues/Errors: On every build after r49599 I'm having the same problem where Im not reaching the full WAN connection speed over WiFi. LAN cable speedtest is fine.

Rolling back to r49599 and everything is fine.

I dont know what is changed after r49599.

_________________
ho1Aetoo
DD-WRT Guru


Joined: 19 Feb 2019
Posts: 1881
Location: Germany

PostPosted: Sun Nov 06, 2022 16:41    Post subject: Reply with quote
if you can't reach 25mbit over wifi then your wifi configuration is certainly wrong.

25mbit is a joke
Bajramo
DD-WRT User


Joined: 03 Jul 2010
Posts: 51

PostPosted: Sun Nov 06, 2022 19:40    Post subject: Reply with quote
ho1Aetoo wrote:
if you can't reach 25mbit over wifi then your wifi configuration is certainly wrong.

25mbit is a joke


Like I said before, on r49599 same wifi config is fine

This result is on r49599 router used as iperf3 server and laptop as client

Code:
 -----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.0.106, port 52648
[  5] local 192.168.0.1 port 5201 connected to 192.168.0.106 port 52649
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  5.97 MBytes  50.0 Mbits/sec
[  5]   1.00-2.00   sec  6.18 MBytes  51.9 Mbits/sec
[  5]   2.00-3.00   sec  6.41 MBytes  53.8 Mbits/sec
[  5]   3.00-4.00   sec  6.41 MBytes  53.8 Mbits/sec
[  5]   4.00-5.00   sec  6.20 MBytes  52.0 Mbits/sec
[  5]   5.00-6.00   sec  6.49 MBytes  54.3 Mbits/sec
[  5]   6.00-7.00   sec  6.25 MBytes  52.5 Mbits/sec
[  5]   7.00-8.00   sec  6.46 MBytes  54.2 Mbits/sec
[  5]   8.00-9.00   sec  6.48 MBytes  54.4 Mbits/sec
[  5]   9.00-10.00  sec  6.36 MBytes  53.4 Mbits/sec
[  5]  10.00-10.03  sec   155 KBytes  49.9 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.03  sec  63.4 MBytes  53.0 Mbits/sec                  receiver


And this result is on r50814 router used as iperf3 server and laptop as client

Code:

Accepted connection from 192.168.0.106, port 64955
[  5] local 192.168.0.1 port 5201 connected to 192.168.0.106 port 64956
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  6.15 MBytes  51.6 Mbits/sec
[  5]   1.00-2.00   sec  6.20 MBytes  52.0 Mbits/sec
[  5]   2.00-3.00   sec  6.39 MBytes  53.6 Mbits/sec
[  5]   3.00-4.00   sec  5.99 MBytes  50.3 Mbits/sec
[  5]   4.00-5.00   sec  6.34 MBytes  53.2 Mbits/sec
[  5]   5.00-6.00   sec  6.21 MBytes  52.0 Mbits/sec
[  5]   6.00-7.00   sec  6.35 MBytes  53.2 Mbits/sec
[  5]   7.00-8.00   sec  6.08 MBytes  51.0 Mbits/sec
[  5]   8.00-9.00   sec  5.89 MBytes  49.4 Mbits/sec
[  5]   9.00-10.00  sec  6.08 MBytes  51.1 Mbits/sec
[  5]  10.00-10.01  sec  35.6 KBytes  43.7 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.01  sec  61.7 MBytes  51.7 Mbits/sec                  receiver


The problem does not seam to be the wifi because its reaching 50 Mbits LAN to LAN

The problem has to be on the WAN side.

_________________
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 843

PostPosted: Sun Nov 06, 2022 20:51    Post subject: Reply with quote
Bajramo wrote:
The problem does not seam to be the wifi because its reaching 50 Mbits LAN to LAN

The problem has to be on the WAN side.


This looks quite wrong to me. Can you describe your wifi layout a little? How far away is the client from the router? That speed seems very low.

WiFi B is faster than that. What speed is your internet provider advertising?

_________________
Netgear R9000 X10
DD-WRT v3.0-r51506 std (01/25/23)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS
2.4GHz: VANILLA Firmware, Airtime Fairness Enabled, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: VANILLA Firmware, Airtime Fairness Enabled, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
Bajramo
DD-WRT User


Joined: 03 Jul 2010
Posts: 51

PostPosted: Sun Nov 06, 2022 22:07    Post subject: Reply with quote
MLandi wrote:
Bajramo wrote:
The problem does not seam to be the wifi because its reaching 50 Mbits LAN to LAN

The problem has to be on the WAN side.


This looks quite wrong to me. Can you describe your wifi layout a little? How far away is the client from the router? That speed seems very low.

WiFi B is faster than that. What speed is your internet provider advertising?

The iperf test was Lan to Lan. The transfer was 50 mbit because the client has 65 Mbit Wi-Fi card. That's not the problem...

My advertised internet speed is 25 Mbit

With the older builds I'm getting the full 25 Mbit and with the latest build I'm getting 18-21 Mbit.

_________________
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 843

PostPosted: Sun Nov 06, 2022 22:11    Post subject: Reply with quote
Bajramo wrote:
The iperf test was Lan to Lan. The transfer was 50 mbit because the client has 65 Mbit Wi-Fi card. That's not the problem...

My advertised internet speed is 25 Mbit

With the older builds I'm getting the full 25 Mbit and with the latest build I'm getting 18-21 Mbit.


I'm guessing that the client is old. In any case, I think there is a setting that is different between the builds.

_________________
Netgear R9000 X10
DD-WRT v3.0-r51506 std (01/25/23)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS
2.4GHz: VANILLA Firmware, Airtime Fairness Enabled, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: VANILLA Firmware, Airtime Fairness Enabled, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum