Posted: Wed Nov 02, 2022 7:10 Post subject: New Build - 11/02/2022 - r50786
Welcome to Marvell r50786 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Router Name DD-WRT
Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r50786 std (11/02/22)
Kernel Version Linux 4.9.331 #3496 SMP Wed Nov 2 02:41:36 +07 2022 armv7l
Uptime 8 min
update- browser-waterfox,I switched from Linksys firmware , browser waterfox
connection Type PPPoE - IPv6 Type DHCPv6 with Prefix Delegation 1Gbps
IPv6 Type DHCPv6 with Prefix Delegation-On
Operating Mode Gateway/AP
Shortcut Forwarding Engine-On
Schedule Reboot-On,
Web Access Protocol - HTTPS,
Port Forwarding - Ok,
USB - for syslog-ok
Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36,Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok
Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N, Width VHT 40 Mhz-Wireless Channel-6, Extension Channel Lower,Short Preamble, Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok
Issues/Errors : ipv6 does not work(connection Type PPPoE - IPv6 Type DHCPv6 with Prefix Delegation)
Code:
Nov 2 18:20:00 DD-WRT user.info : [radvd] : maybe died, we need to re-exec it
Nov 2 18:20:00 DD-WRT daemon.info radvd[2395]: version 2.19 started
Nov 2 18:20:00 DD-WRT user.info : [radvd] : successfully started
Nov 2 18:20:00 DD-WRT daemon.err radvd[2398]: Exiting, privsep_read_loop had readn return 0 bytes
Nov 2 18:20:00 DD-WRT daemon.err radvd[2398]: Exiting, privsep_read_loop is complete.
Nov 2 18:20:22 DD-WRT daemon.warn dnsmasq[1807]: possible DNS-rebind attack detected: dns.msftncsi.com
Nov 2 18:22:00 DD-WRT user.info : [radvd] : maybe died, we need to re-exec it
Nov 2 18:22:00 DD-WRT daemon.info radvd[2412]: version 2.19 started
Nov 2 18:22:00 DD-WRT user.info : [radvd] : successfully started
Nov 2 18:22:00 DD-WRT daemon.err radvd[2415]: Exiting, privsep_read_loop had readn return 0 bytes
Nov 2 18:22:00 DD-WRT daemon.err radvd[2415]: Exiting, privsep_read_loop is complete.
Nov 2 18:24:00 DD-WRT user.info : [radvd] : maybe died, we need to re-exec it
Joined: 24 Feb 2013 Posts: 1634 Location: Belgrade
Posted: Fri Nov 04, 2022 22:22 Post subject:
there was a problem with radvd... wrong code is executed on anything which is not glibc...
it is probably fixed in 50799 so please wait for next public release... or use dnsmasq for RA as a workaround...