New Build - 10/05/2022 - r50357

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Wed Oct 05, 2022 5:20    Post subject: New Build - 10/05/2022 - r50357 Reply with quote
Welcome to Atheros r50357 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50313 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
mDNS/Avahi nl ft fs Unbound QoS nDPI Tor ntp EC-SRP Wiviz MiniDLNA Squid SmartDNS jQuery FRR ZFS dnsmasq kernels
In-kernel Samba (ksmbd 3.4.4+++++) guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• TL-WR1043N v5 stock factory-to-ddwrt.bin flash and TFTP recovery fixed 50231, add support 50242, 50243, 50244, 50252.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Wed Oct 05, 2022 6:30    Post subject: Reply with quote
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r50357 std (10/05/22)
Kernel Version Linux 4.9.330 #651 SMP Tue Oct 4 13:04:30 +07 2022 armv7l
Current Time Wed, 05 Oct 2022 00:28:15
Uptime 1 min
GUI over 50313
Reset: no
Issues: upgraded fine

Thank you BS & Devs
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 167
Location: Maharashtra, India

PostPosted: Wed Oct 05, 2022 6:56    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r50357 std (10/05/22)
Kernel: Linux 4.9.330 #1253 SMP Wed Oct 5 01:03:16 +07 2022 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using CLI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r50176 std (09/15/22)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, NTP TimeSync, WireGuard, Samba
Status: Working Fine ; running DD-WRT firmware type for 2.4ghz & 5ghz, uptime 30+min.


Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 6411
Location: UK, London, just across the river..

PostPosted: Wed Oct 05, 2022 7:21    Post subject: Reply with quote
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r50357 std (10/05/22)
Kernel Version Linux 4.9.330 #1253 SMP Wed Oct 5 01:03:16 +07 2022 armv7l

update: CLI r50313 > r50357
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...Thanks BS & Team !

Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r50357 std (10/05/22)
Kernel Version Linux 3.18.140-d6 #154673 Wed Oct 5 06:09:13 +07 2022 mips

update: GUI r50313 > r50357
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...Thanks BS & Team !

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 55179 WAP
TP-Link WR1043NDv2 -DD-WRT 55303 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55460 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55460 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55363 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Sat Oct 08, 2022 6:12; edited 1 time in total
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Wed Oct 05, 2022 8:34    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r50357 std (10/05/22)
Linux 4.9.330 #1251 SMP Tue Oct 4 18:49:35 +07 2022 armv7l
scp 'firmware.bin' install over r50313
all ok
uptime 10:43

#

Netgear WNDR3700 V4
DD-WRT v3.0-r50357 std (10/05/22)
Linux 3.18.140-d6 #154701 Wed Oct 5 07:15:52 +07 2022 mips
scp 'firmware.bin' install over r50313
all ok
uptime 5:22
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Wed Oct 05, 2022 11:01    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r50357) / Linux 4.9.330 #1253 SMP Wed Oct 5 01:03:16 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50313 std (10/03/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 20MHz, 802.11r (FT), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
ArjenR49
DD-WRT Guru


Joined: 05 Oct 2008
Posts: 666
Location: Helsinki, Finland / nr. Alkmaar, Netherlands

PostPosted: Wed Oct 05, 2022 13:41    Post subject: Reply with quote
Router/Version: R7800
File/Kernel: Linux 4.9.330 #1253 SMP Wed Oct 5 01:03:16 +07 2022 armv7l
Previous/Reset: 50313/nvram reset recently, a few versions back
Mode/Status: LAN & WLAN router connected to cable modem
Issues/Errors: none, except a very long standing issue that I haven't seen mentioned, viz. while I am browsing the router's GUI, a dialog pops up asking permission to store a password for an account named 8000, or some such. Bogus and I decline every time. It's annoying.

The GUI feels distinctly more snappy now than in recent previous version!! It's been rather tardy for many versions, both before and after the great reset.
QoS WAN HSFC Cake set at 18000/1300. Getting some 13000/1000, but at B ratings per dslreports.com/speedtest. If I go lower still, I get A ratings at lower speeds. I am behind a 'corporate' firewall. Without QoS I've seen the corporate 'WAN' peak at over 40 Mb/s, just the very beginning of the test, dropping steeply rapidly.
Virtual LAN network on one port. bridged with a VAP.
Two more VAP's, one for IoT (smart switches), the other for guests. Not that there are many around, but it's a hobby, right.
Firewall rules to isolate the IoT stuff.
Reserved IP file on a thumbdrive JFFS.
Updated through easyddup.
Local DNS server PiHole/Unbound on a Raspberry Pi Zero with small UPS board.
CPU frequency scaling set in startup script.
Cleanup thumbdrive partitions with e2fsck in usb script.
No IPv6.


Last edited by ArjenR49 on Wed Oct 05, 2022 21:06; edited 1 time in total
iMAK
DD-WRT User


Joined: 06 Nov 2011
Posts: 81

PostPosted: Wed Oct 05, 2022 14:10    Post subject: Reply with quote
Update method: SSH
Router/Version: Buffalo WZR-HP-G300NH / Version 1
File/Kernel: DD-WRT v3.0-r50357 std (10/05/22) / Linux 3.10.108-d11 #118132 Wed Oct 5 01:16:43 +07 2022 mips
Previous/Reset: DD-WRT v3.0-r50274 std (09/27/22) / No
Mode/Status: AP / Working
Issues/Errors: None

_________________
Buffalo WZR-HP-G300NH
ramblin
DD-WRT User


Joined: 03 Nov 2015
Posts: 316
Location: Florida, USA

PostPosted: Wed Oct 05, 2022 14:28    Post subject: Reply with quote
Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r50357 std (10/05/22)
Kernel: Linux 4.9.330 #1251 SMP Tue Oct 4 18:49:35 +07 2022 armv7l
Reset: NOPE ..GUI upgrade from r50313
Errors: NONE

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r50357 std (10/05/22)
Kernel: Linux 4.9.330 #1251 SMP Tue Oct 4 18:49:35 +07 2022 armv7l
Reset: NOPE ..GUI upgrade from r50313
Errors: NONE

I just updated because I like the number 357

_________________
......All GOOD here... Just Handshakes and Time Stamps !......
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Wed Oct 05, 2022 21:26    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r50357 std (10/05/22)
Previous/Reset: DD-WRT v3.0-r50313 std (10/03/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: No issues

Don't know if it is just my perceptions on an early evening, but the UI seems faster than it has been.

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
AsX
DD-WRT User


Joined: 15 Jun 2010
Posts: 50

PostPosted: Wed Oct 05, 2022 22:34    Post subject: Reply with quote
In WireGuard, how the new Tunnel Obfuscation is supposed to work? What is the Key and what can it be set to?
dpp3530
DD-WRT Guru


Joined: 12 Dec 2007
Posts: 764
Location: Pittsburgh, PA USA

PostPosted: Thu Oct 06, 2022 0:08    Post subject: Reply with quote
AsX wrote:
In WireGuard, how the new Tunnel Obfuscation is supposed to work? What is the Key and what can it be set to?

And do you need to update the client config?

_________________
__________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1899

PostPosted: Thu Oct 06, 2022 4:17    Post subject: Reply with quote
dpp3530 wrote:
AsX wrote:
In WireGuard, how the new Tunnel Obfuscation is supposed to work? What is the Key and what can it be set to?

And do you need to update the client config?

WireGuard guides and documentation Changelog wrote:
50357:
Obfuscation for WireGuard: https://github.com/infinet/xt_wgobfs, this is still experimental

To come:
Obfuscation for WireGuard: https://github.com/infinet/xt_wgobfs
Use IPSET with DNSMasq integration for destination routing

To research:
Obfuscation for WireGuard: https://github.com/infinet/xt_wgobfs

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12837
Location: Netherlands

PostPosted: Thu Oct 06, 2022 5:46    Post subject: Reply with quote
About WireGuard obfuscation, we are still working on it and maybe the definitive implementation will change, so it is not yet in the manual.

But it works and is intended to obfuscate WG traffic so it should be able to pass a blocking firewall.

On the server side enable it and set the password in the tunnel section.
Note the whole tunnel is obfuscated.

On the client (the side which has an endpoint enabled in the peer)
Do the same but it should be set in the Peer section just under the endpoint.
Use the same password.

It will lower throughput.

I have also made an implementation were you set the obfuscation per peer on the server side but in that case you also have to set the Remote listen port, advantage is that a server can have clients with and without obfuscation.

Let me know what you think, if it works and how it affect throughput.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
foz111
DD-WRT Guru


Joined: 01 Oct 2017
Posts: 704
Location: Earth

PostPosted: Thu Oct 06, 2022 7:54    Post subject: Reply with quote
WireGuard obfuscation great feature nice one Devs.
_________________
Netgear R7800 PPPoE Main Router
Network IPV4 - Isolated Vlan's with IoT Devices. Unifi AC-Pro x 3 AP's, Router Wi-Fi Disabled. OVPN Server With Paid Commercial Wireguard Client's. Gateway Mode, DNSMasq, Static Leases & DHCP, Pi-Hole DNS & Running Unbound.

No one can build you the bridge on which you, and only you, must cross the river of life!
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum