New Build - 10/01/2022 - r50308

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page Previous  1, 2
Author Message
jbkt23
DD-WRT Novice


Joined: 31 Dec 2018
Posts: 37

PostPosted: Sat Oct 01, 2022 18:28    Post subject: r50308 Reply with quote
Router/Version: ArcherC7v5
File/Kernel: DD-WRT v3.0-r50308 std (10/01/22) / Linux 3.18.140-d6 #154321
Previous/Reset: r49934 / No
Mode/Status: AP / Lan Gateway / Running Up 4 Hrs
Issues/Errors: None / None
Functions: DNS, DNSMasq, dhcp
Radio Firmware: 2.4G dd-wrt 5G Vanilla
2.4 Ghz Status: NG-Mixed, 4 (2427 MHz HT20), 12µs (1800m)
5 Ghz Status: Mixed, 48 + 44 (5240 MHz HT40), 12µs (1800m)

Upgrade via CLI, curl, write & reboot

_________________
WNDR4000|v24-50963_NEWD-2_K3.x_mega|Inactive Spare
ARCHER-C7v5 | v3.0-r50963 std | AP Gateway
Sponsor
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4585

PostPosted: Sun Oct 02, 2022 1:10    Post subject: Reply with quote
habeIchVergessen wrote:
hardware: ea8500
software: 50308/50176 webupgrade

issues:
- no internet connection. ifconfig doesn't list vlan* interfaces. switch config seems to be valid

- back on 48081 (ubootenv + reboot) doesn't connect to internet too. powercycle is required to get internet back
egc wrote:
@habeIchVergessen there are no VLAN interfaces any more since the updated .dts when we switched from one CPU port to two CPU ports.

eth0 is the WAN (vlan2)
eth1 is the LAN (vlan1 with br0 and radio's)

Did you reset to defaults after the switch was made (someone will surely look up with what build that was)
mrjcd wrote:
The EA8500 must be reset for any build after r49838
https://mrjcd.com/EA8500_DD-WRT/vlans/ Twisted Evil
Please use webUI factory defaults, or CLI nvram erase && reboot. Please see build threads also post linked below.

New Build - 08/24/2022 - r49866 (new layout, to reset) --> EA8500: Old & New sysinit network reference defaults

New Build - 08/29/2022 - r49976 (Read pages 2 and 3) All switch cpu port layout changes detailed above also diff.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 5388
Location: UK, London, just across the river..

PostPosted: Sun Oct 02, 2022 4:58    Post subject: Reply with quote
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r50308 std (10/01/22)
Kernel Version Linux 3.18.140-d6 #154311 Sat Oct 1 06:49:54 +07 2022 mips
update: GUI r50146 > r50308
reset: NO
mode: Gateway
status: Operational 6h+
errors: Nothing new, yet...


Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r50308 std (10/01/22)
Kernel Version Linux 4.9.329 #1238 SMP Sat Oct 1 01:29:46 +07 2022 armv7l

update: CLI r50274 > r50308
reset: NO
mode: Gateway
status: Operational 6h+
errors: Nothing new, yet...

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 50500 WAP
TP-Link WR1043NDv2 -DD-WRT 50963 Gateway,DNS,AP Isolation,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -DD-WRT 50841 Gateway,DNS,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -Gargoyle OS 1.13.0 AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 50963 Gateway,DNS,AD-Block,AP&Net Isolation,VLAN's,Firewall,DoT,Vanilla
Netgear R9000 --DD-WRT 50927 Gateway,DNS,AD-Block,AP Isolation,Firewall,Forced DNS,DoT,2,4Ghz only,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 50927 Gateway,DNS,AD-Block,Firewall,Forced DNS,VLAN's,DoT,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 805

PostPosted: Sun Oct 02, 2022 13:45    Post subject: Reply with quote
Up and stable for 23+ hours, no issues. Thanks, BrainSlayer and Team!
_________________
Netgear R9000 X10
DD-WRT v3.0-r50963 std (11/28/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
2.4GHz: VANILLA Firmware, Airtime Fairness Enabled, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: VANILLA Firmware, Airtime Fairness Enabled, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
BrainSlayer
Site Admin


Joined: 06 Jun 2006
Posts: 7349
Location: Dresden, Germany

PostPosted: Sun Oct 02, 2022 15:25    Post subject: Reply with quote
regarding the webif performance. i made some code which indeed slowed it down. this is a known issue. i'm currently working on a issue where several elements of the page are incorrectly loaded or broken sometimes. not a serious issue, but annoying. i'm still working on this and in my internal versions its now much faster again. still testing
_________________
"So you tried to use the computer and it started smoking? Sounds like a Mac to me.." - Louis Rossmann https://www.youtube.com/watch?v=eL_5YDRWqGE&t=60s
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2143
Location: All over YOUR webs

PostPosted: Sun Oct 02, 2022 15:39    Post subject: Reply with quote
egc wrote:
@grc, thanks for reporting

OpenVPN Status page display problem has been confirmed and noted.

Developers are aware and dealing with it Smile


Uncovered 16 year old bug on this page by removing CSS rules overkill specificity.

fix https://github.com/mirror/dd-wrt/commit/bff4faabcc74f3ca11208832c2c27f404900b56f.patch

Anyway thx for the report.

This page needs way more love to bring it inline with other pages if anyone can take a full screenshot of the page fully populated with openvpn tables etc would be a good visual aid.

This page has still many issues and missing stuff from inception, now on my todo list for tomorrow first thing.

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
konder
DD-WRT Novice


Joined: 23 Jan 2018
Posts: 2

PostPosted: Sun Oct 02, 2022 18:43    Post subject: Reply with quote
Router Model: TP-Link TL-WR841N v7.0
Firmware Version: DD-WRT v3.0-r50308 std (10/01/22)
Mode: AP/Client Mode
Reset: None required
Status: OK
Uptime: ~2 hours
Issues/Errors: httpd : Authentication fail

And wifi has dropped after 15-20 sec up so every time after 15-30 min.

Code:
Oct 2 20:27:10 daemon.info ntpclient[1487]: Time set from 2.pool.ntp.org [194.54.80.29].
Oct 2 20:27:10 daemon.info process_monitor[1485]: Cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Oct 2 20:27:10 daemon.info process_monitor[1485]: Local timer delta is 0
Oct 2 20:27:10 user.info : [sfe] : shortcut forwarding engine successfully stopped
Oct 2 20:27:10 user.info : [sfe] : shortcut forwarding engine successfully started
Oct 2 20:27:11 user.info : [sfe] : shortcut forwarding engine successfully stopped
Oct 2 20:27:12 user.info : [vpn modules] : vpn modules successfully unloaded
Oct 2 20:27:12 user.info : [vpn modules] : nf_conntrack_proto_gre successfully loaded
Oct 2 20:27:12 user.info : [vpn modules] : nf_nat_proto_gre successfully loaded
Oct 2 20:27:12 user.info : [vpn modules] : nf_conntrack_pptp successfully loaded
Oct 2 20:27:12 user.info : [vpn modules] : nf_nat_pptp successfully loaded
Oct 2 20:27:12 user.info : [sfe] : shortcut forwarding engine successfully started
Oct 2 20:27:13 user.info : [sfe] : shortcut forwarding engine successfully started
Oct 2 20:27:13 daemon.debug process_monitor[1485]: Restarting cron (time sync change)
Oct 2 20:27:13 user.info : [cron] : daemon successfully stopped
Oct 2 20:27:13 user.info : [cron] : successfully started
Oct 2 20:27:13 cron.info cron[1957]: (CRON) STARTUP (fork ok)
Oct 2 20:27:13 daemon.info process_monitor[1485]: [process_monitor] : cleanup timers
Oct 2 20:27:13 user.info : [process_monitor] : daemon successfully stopped
Oct 2 20:27:13 user.info : [process_monitor] : successfully started
Oct 2 20:27:13 daemon.debug process_monitor[1961]: We need to re-update after 3600 seconds
Oct 2 20:27:13 daemon.info process_monitor[1961]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
[b]Oct 2 20:28:03 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 20:29:07 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 20:29:23 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 20:44:08 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 21:04:55 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 21:14:43 daemon.info httpd[1039]: [httpd] : Authentication fail
[/b]
[/img]
habeIchVergessen
DD-WRT User


Joined: 04 May 2010
Posts: 425

PostPosted: Sun Oct 02, 2022 19:15    Post subject: Reply with quote
blkt wrote:

New Build - 08/24/2022 - r49866 (new layout, to reset) --> EA8500: Old & New sysinit network reference defaults

New Build - 08/29/2022 - r49976 (Read pages 2 and 3) All switch cpu port layout changes detailed above also diff.


thanks for the advice
4 simple nvram set fixes makes internet working again
can't undersand why initialization of defaults doesn't correct this crap
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4585

PostPosted: Mon Oct 03, 2022 2:00    Post subject: Reply with quote
habeIchVergessen wrote:
4 simple nvram set fixes makes internet working again

Which four variables? EA8500 (all dual cpu port models) avoid and ignore Switch Config tab, use only commands.
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 13112
Location: Texas, USA

PostPosted: Mon Oct 03, 2022 13:28    Post subject: Reply with quote
Router Model: TP-Link TL-WR1043N v5.0
Firmware Version: DD-WRT v3.0-r50308 std (10/01/22)
Previous: DD-WRT v3.0-r50274 std (09/27/22)
File: ttplink_wr1043n-v5.bin
Kernel Version: Linux 3.18.140-d6 #154315 Sat Oct 1 06:59:33 +07 2022 mips
Mode: Gateway/AP
Reset: None required
Status: OK
Uptime: ~2 days
Issues/Errors: "Save Custom" button missing on Administration -> Commands:



Note: The bug/issue has already been fixed in commit r50312, gratuitous report only for the community-at-large. Recommended initial build for this router is now 50313. Will continue testing and report back.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
At some point, people just get plain tired of this place.
Because they are tired of bottom-feeders and the same old hat.

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 308
Location: Szczecin, Poland EU

PostPosted: Mon Oct 03, 2022 14:05    Post subject: New Build - 10/01/2022 - r50308 Reply with quote
Router/Version: TP-Link TL-WDR3600 v1.5
Kernel: Linux 3.10.108-d11 #117776 Sat Oct 1 04:30:12 +07 2022 mips
Reset: No
Mode: Internet gateway, WIFI 5GHz AP, dnsmasq, firewall
Issues: Some yellow marked events in logs. That's rather nothing significant
Status: Working
Uptime: ~52h

Device working without problems. Performance is on good level.
habeIchVergessen
DD-WRT User


Joined: 04 May 2010
Posts: 425

PostPosted: Mon Oct 03, 2022 14:18    Post subject: Reply with quote
blkt wrote:
habeIchVergessen wrote:
4 simple nvram set fixes makes internet working again

Which four variables? EA8500 (all dual cpu port models) avoid and ignore Switch Config tab, use only commands.

Code:

nvram set wan_iface=eth0
nvram set wan_ifname2=eth0
nvram set wan_ifname=eth0
nvram set wan_ifnames=eth0
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 754

PostPosted: Mon Oct 03, 2022 14:23    Post subject: Reply with quote
Router Model: TP-Link TL-WR1043ND v1.8
Firmware Version: DD-WRT v3.0-r50308 std (10/01/22)
Previous: DD-WRT v3.0-r50274 std (09/27/22)
File: tl-wr1043nd-webflash.bin
Kernel Version: Linux 3.10.108-d11 #117804 Sat Oct 1 05:31:43 +07 2022 mips
Mode: Gateway/AP
Reset: None required
Status: OK
Uptime: ~2 Days
Issues/Errors: There is no switch config tab, whatsoever. The swconfig binary utility is present. This router has the Realtek RTL8366RB switch. The webUI is really snappy and stable 🤘💥🔥✔👍

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.4
thommy181
DD-WRT User


Joined: 16 Mar 2019
Posts: 308
Location: Szczecin, Poland EU

PostPosted: Wed Oct 05, 2022 8:52    Post subject: Reply with quote
konder wrote:
Router Model: TP-Link TL-WR841N v7.0
Firmware Version: DD-WRT v3.0-r50308 std (10/01/22)
Mode: AP/Client Mode
Reset: None required
Status: OK
Uptime: ~2 hours
Issues/Errors: httpd : Authentication fail

And wifi has dropped after 15-20 sec up so every time after 15-30 min.

Code:
Oct 2 20:27:10 daemon.info ntpclient[1487]: Time set from 2.pool.ntp.org [194.54.80.29].
Oct 2 20:27:10 daemon.info process_monitor[1485]: Cyclic NTP Update success (servers 2.pool.ntp.org 212.18.3.19 88.99.174.22)
Oct 2 20:27:10 daemon.info process_monitor[1485]: Local timer delta is 0
Oct 2 20:27:10 user.info : [sfe] : shortcut forwarding engine successfully stopped
Oct 2 20:27:10 user.info : [sfe] : shortcut forwarding engine successfully started
Oct 2 20:27:11 user.info : [sfe] : shortcut forwarding engine successfully stopped
Oct 2 20:27:12 user.info : [vpn modules] : vpn modules successfully unloaded
Oct 2 20:27:12 user.info : [vpn modules] : nf_conntrack_proto_gre successfully loaded
Oct 2 20:27:12 user.info : [vpn modules] : nf_nat_proto_gre successfully loaded
Oct 2 20:27:12 user.info : [vpn modules] : nf_conntrack_pptp successfully loaded
Oct 2 20:27:12 user.info : [vpn modules] : nf_nat_pptp successfully loaded
Oct 2 20:27:12 user.info : [sfe] : shortcut forwarding engine successfully started
Oct 2 20:27:13 user.info : [sfe] : shortcut forwarding engine successfully started
Oct 2 20:27:13 daemon.debug process_monitor[1485]: Restarting cron (time sync change)
Oct 2 20:27:13 user.info : [cron] : daemon successfully stopped
Oct 2 20:27:13 user.info : [cron] : successfully started
Oct 2 20:27:13 cron.info cron[1957]: (CRON) STARTUP (fork ok)
Oct 2 20:27:13 daemon.info process_monitor[1485]: [process_monitor] : cleanup timers
Oct 2 20:27:13 user.info : [process_monitor] : daemon successfully stopped
Oct 2 20:27:13 user.info : [process_monitor] : successfully started
Oct 2 20:27:13 daemon.debug process_monitor[1961]: We need to re-update after 3600 seconds
Oct 2 20:27:13 daemon.info process_monitor[1961]: [process_monitor] : set timer: 3600 seconds, callback: ntp_main()
[b]Oct 2 20:28:03 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 20:29:07 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 20:29:23 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 20:44:08 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 21:04:55 daemon.info httpd[1039]: [httpd] : Authentication fail
Oct 2 21:14:43 daemon.info httpd[1039]: [httpd] : Authentication fail
[/b]
[/img]


I'm suggest you to change values router name, hostname and wifi network name. You have default there and it's unsecure solution. Any other name should be better.
Goto page Previous  1, 2 Display posts from previous:    Page 2 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum