[blkt]

Welcome to Atheros r50313 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50308 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
• mDNS/Avahi nl ft fs Unbound QoS nDPI Tor ntp EC-SRP Wiviz MiniDLNA Squid SmartDNS jQuery FRR ZFS kernels dnsmasq
• In-kernel Samba (ksmbd 3.4.4+++++) guest behavior selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• TL-WR1043N v5 stock factory-to-ddwrt.bin flash and TFTP recovery fixed 50231, add support 50242, 50243, 50244, 50252.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[IONK]

Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r50313) / Linux 4.9.329 #1240 SMP Mon Oct 3 02:23:40 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50308 std (10/01/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 40MHz, 802.11r (FT), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none

[mrjcd]

when ya get old/lazy

[the-joker]

[mrjcd]

[kernel-panic69]

Router Model: TP-Link TL-WR1043N v5.0
Firmware Version: DD-WRT v3.0-r50313 std (10/03/22)
Previous: DD-WRT v3.0-r50308 std (10/01/22)
File: ttplink_wr1043n-v5.bin
Kernel Version: Linux 3.18.140-d6 #154315 Sat Oct 1 06:59:33 +07 2022 mips
Mode: Gateway/AP
Reset: None required
Status: OK
Uptime: ~35 minutes
Issues/Errors: Missing "Save Custom" button issue on Administration -> Commands fixed:



Note: Recommended initial build for this router is now 50313. Will continue testing and report back. I have a feeling that the previous rendering issue was actually related to the missing button syntax (javascript error) issue and did not require a patch, but that would have to be tested. As long as "Save USB" is functional on devices with (a) USB port(s), that is all that matters. Thanks for your diligence, BrainSlayer!

[kernel-panic69]

[RobrPatty]

Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r50313 std (10/03/22)
Kernel Version Linux 4.9.329 #650 SMP Thu Sep 29 01:33:34 +07 2022 armv7l
Current Time Mon, 03 Oct 2022 08:46:11
Uptime 1 min
GUI over 50308
Reset: no
Issues: upgraded fine

Thank you BS & Devs

[mrjcd]

[kernel-panic69]

[MLandi]

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r50313 std (10/03/22)
Previous/Reset: DD-WRT v3.0-r50308 std (10/01/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: No issues

[ramblin]

Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r50313 std (10/03/22)
Kernel: Linux 4.9.329 #1238 SMP Sat Oct 1 01:29:46 +07 2022 armv7l
Reset: NO ..GUI upgrade from r50308
Errors: NONE

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r50313 std (10/03/22)
Kernel: Linux 4.9.329 #1238 SMP Sat Oct 1 01:29:46 +07 2022 armv7l
Reset: NO ..GUI upgrade from r50308
Errors: NONE


Hows it working ? ask me in the morning....

[egosumumbravir]

Router/Version: Netgear Nighthawk R9000
File/Kernel: r9000-webupgrade.bin (r50313) / Linux 4.9.329 #650 SMP Thu Sep 29 01:33:34 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50274 std (27.09.22) / YES
Mode/Status: Gateway + Access Point (2.4 & 5 Ghz) + USB Storage (guide by egc) + Wireguard server.
Issues/Errors: No errors to report so far. Seems to be an increased incidence of pages stalling on load - for this r9000 (and a different PC to the r8000 testing) from none I can recall to often enough today to be mildly annoying.

Woo, Wireguard tunnel "Remove Peer" button is working. Yay.

[MLandi]

10+ hours up and stable. Thanks, BS & Team

[vortex05]

Router/Version: WNDR4300/v1
File/Kernel: Linux 3.18.140-d6 #154459 Mon Oct 3 08:04:46 +07 2022 mips
Previous/Reset: 10-01-2022-r50308/No
Mode/Status: Gateway/Working normally
Issues/Errors: No issues