Posted: Sat Oct 01, 2022 4:58 Post subject: New Build - 10/01/2022 - r50308
Welcome to Broadcom r50308 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Netgear R8500
Firmware Version DD-WRT v3.0-r50308 std (10/01/22)
Kernel Version Linux 4.4.302-st25 #7635 SMP Sat Oct 1 03:26:24 +07 2022 armv7l
Current Time Sat, 01 Oct 2022 01:32:30
Uptime 1 min
GUI over 50274
Reset: no
Issues: upgraded fine
Joined: 18 Mar 2014 Posts: 12889 Location: Netherlands
Posted: Sat Oct 01, 2022 10:24 Post subject:
Router Model: Netgear R6400v2, board_id: U12H332T
Firmware Version: DD-WRT v3.0-r50308M Community Build (10/01/22)
Kernel Version: Linux 4.4.302-st25 #1 SMP Sat Oct 1 09:39:41 CEST 2022 armv7l
Upgraded from: DD-WRT v3.0-r50146M Community Build (09/10/22)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working, USB storage NAS working.
OpenVPN server working.
WireGuard server working with 8 clients (phones, Windows and two other routers for site-to-site setup).
Posted: Sat Oct 01, 2022 19:39 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r50308 std (10/01/22) Kernel: Linux 4.4.302-st25 #7629 SMP Sat Oct 1 02:29:27 +07 2022 armv7l Mode: Gateway, Wireless AP, Static Leases, Dnsmasq Caching. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope. Previous: 09-27-2022-r50274 Status: Working so far, still testing. Web UI glitchy when using Administration>>Commands>>Command Shell Dialog Box. wl: 14E4:4360 Temperatures: CPU 63.6 °C / WL0 52.2 °C / WL1 53.6 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest.jpg
Description:
Speedtest Over 5.8GHz Wireless. ISP Spec: 400 Mbps Down / 25 Mbps Up.
Filesize:
60.76 KB
Viewed:
2638 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Joined: 16 Nov 2015 Posts: 6440 Location: UK, London, just across the river..
Posted: Sun Oct 02, 2022 13:53 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r50308 std (10/01/22)
Kernel Version Linux 4.4.302-st25 #7629 SMP Sat Oct 1 02:29:27 +07 2022 armv7l
update: CLI r50146 > r50308
reset: NO
mode: Gateway
status: Operational 12h+
errors: Nothing new, yet...Thanks BS and Team ! _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Posted: Sun Oct 02, 2022 21:00 Post subject: Re: Netgear Nighthawk R7000
the-joker wrote:
twindragon6 wrote:
Status: Working so far, still testing. Web UI glitchy when using Administration>>Commands>>Command Shell Dialog Box.
As usual consistent reports, any more consistency it will be sticky.
What sort of glitches do you see?
The screen will half load and become non responsive to certain cat and nvram commands. For example:
nvram show | grep version
But not all of the time, it's inconsistent. Also adding a return before hitting the "Run Commands" button yields varying results. I'll try to capture a screenshot if it does it again.
