DD-WRT :: View topic - New Build - 10/01/2022

New Build - 10/01/2022 - r50308

DD-WRT Forum Index -> Atheros WiSOC based Hardware

Goto page 1, 2 Next

View previous topic :: View next topic

Author

Message

blkt
DD-WRT Guru

Joined: 20 Jan 2019
Posts: 5700

Posted: Sat Oct 01, 2022 4:57 Post subject: New Build - 10/01/2022 - r50308

Welcome to Atheros r50308 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r50274 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Adv, PBR, KS, tips & scripts. Thanks BS egc & eibgrad!

Notes:
• Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
• mDNS/Avahi nl ft fs Unbound QoS nDPI Tor ntp EC-SRP Wiviz MiniDLNA Squid SmartDNS jQuery FRR ZFS kernels dnsmasq
• In-kernel Samba (ksmbd 3.4.4 +++++) guest behavior selectable. • WSD up date • ANTFS/NTFS3 kernel mode driver ++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• TL-WR1043N v5 stock factory-to-ddwrt.bin flash and TFTP recovery fixed 50231, add support 50242, 50243, 50244, 50252.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

Code:

[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

Sponsor

mrjcd
DD-WRT Guru

Joined: 31 Jan 2015
Posts: 6291
Location: Texas

Posted: Sat Oct 01, 2022 5:18 Post subject:
Linksys EA8500 ...main gateway DD-WRT v3.0-r50308 std (10/01/22) Linux 4.9.329 #1236 SMP Fri Sep 30 12:39:32 +07 2022 armv7l GUI install over r50291 worky very well uptime 4:21 other EA8500 scp 'firmware.bin' install over r50291 he's all good

Jovan
DD-WRT User

Joined: 06 Nov 2018
Posts: 122

Posted: Sat Oct 01, 2022 6:52 Post subject:

Router Model TP-Link TL-WR841ND v11
Firmware Version DD-WRT v3.0-r50308 (10/01/22)
Kernel Version Linux 3.18.140-d6 #154297 Sat Oct 1 06:29:19 +07 2022 mips

Updated via CLI from r50274
Reset: yes

Working as AP, Mixed, HT40.

Issue: Bad wifi speeds, my Galaxy Tab S6 doesnt reach 300M-HT40 as with previous firmwares, it shows only 144M-HT20. Ookla Speedtest download test is down to 25.2 Mbps (from usual 80-85 Mbps).

Reverting to r50274.

mrjcd
DD-WRT Guru

Joined: 31 Jan 2015
Posts: 6291
Location: Texas

Posted: Sat Oct 01, 2022 7:06 Post subject:

Netgear WNDR3700 V4
DD-WRT v3.0-r50308 std (10/01/22)
Linux 3.18.140-d6 #154339 Sat Oct 1 08:02:22 +07 2022 mips
scp 'firmware.bin' install over r50291
all good

Code:

mrjcd@daDeb:~$ ssh root@citadel-switch.mrjcd.com
DD-WRT v3.0-r50308 std (c) 2022 NewMedia-NET GmbH
Release: 10/01/22
Board: Netgear WNDR3700 V4
==========================================================

___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/

DD-WRT v3.0
https://www.dd-wrt.com

==========================================================

BusyBox v1.35.0 (2022-10-01 08:02:50 +07) built-in shell (ash)

root@Citadel-Switch:~# ps
PID USER VSZ STAT COMMAND
1 root 1252 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
4 root 0 SW [kworker/0:0]
5 root 0 SW< [kworker/0:0H]
6 root 0 SW [kworker/u2:0]
7 root 0 SW< [khelper]
8 root 0 SW< [netns]
9 root 0 SW [kworker/u2:1]
71 root 0 SW< [writeback]
72 root 0 SW< [crypto]
75 root 0 SW< [bioset]
77 root 0 SW< [kblockd]
79 root 0 SW [kswapd0]
80 root 0 SW [kworker/0:1]
112 root 0 SW [fsnotify_mark]
126 root 0 SW< [deferwq]
127 root 0 SW [kworker/u2:2]
469 root 1020 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
566 root 0 SW< [cfg80211]
569 root 0 SW [kworker/0:2]
612 root 1940 S watchdog
839 root 1472 S syslogd -Z -L
841 root 1472 S klogd
938 root 3324 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
1074 root 1904 S wland
1376 root 4536 S httpd -n -p 80
1381 root 1556 S resetbutton
1788 root 984 S cron
1792 root 1940 S process_monitor
1806 root 1360 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1945 root 1380 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1946 root 1480 S -sh
1948 root 1480 R ps
root@Citadel-Switch:~# uptime && date
02:04:35 up 5 min, load average: 0.11, 0.19, 0.09
Sat Oct 1 02:04:35 CDT 2022
root@Citadel-Switch:~#

RobrPatty
DD-WRT User

Joined: 06 Jun 2016
Posts: 174

Posted: Sat Oct 01, 2022 7:08 Post subject:
Netgear Nighthawk X10 R9000 Firmware Version DD-WRT v3.0-r50308 std (10/01/22) Kernel Version Linux 4.9.329 #650 SMP Thu Sep 29 01:33:34 +07 2022 armv7l Current Time Sat, 01 Oct 2022 01:05:57 Uptime 2 min GUI over 50274 Reset: no Issues: upgraded fine Thank you BS & Devs

grc
DD-WRT User

Joined: 11 Jul 2018
Posts: 122

Posted: Sat Oct 01, 2022 7:23 Post subject:
Router/Version: Netgear R7800 File/Kernel: Linux 4.9.329 #1238 SMP Sat Oct 1 01:29:46 +07 2022 armv7l Previous/Reset: last previous/No Mode/Status: Running Issues/Errors: Gui page load has longer latency but running stable without hanging bad page format on Status/OpenVPN

Jovan
DD-WRT User

Joined: 06 Nov 2018
Posts: 122

Posted: Sat Oct 01, 2022 7:33 Post subject:

Jovan wrote:

Reverted to r50274 but no improvement. So maybe is the tablet to blame, it was a system update that intalled a few days ago, maybe that changed something. My main computer reach 300M-HT40, no problem there.

DWCruiser
DD-WRT User

Joined: 15 Aug 2016
Posts: 223
Location: Melbourne, Australia

Posted: Sat Oct 01, 2022 12:07 Post subject:

Thank you BS & Team.

Netgear R9000 Nighthawk X10
File: DD-WRT v3.0-r50308 std (10/01/22)
Kernel: Linux 4.9.329 #650 SMP Thu Sep 29 01:33:34 +07 2022 armv7l
Reset: No
Mode & Uptime: Gateway running over 6.30hrs
Features:
- Gateway & DNSMasq
- Network separation (VLAN) for improved mgt & security
* Private network (vlan 1, wlan0, wlan1)
* Guest network (wlan0.1)
* IoT network (wlan1.1)
(However, VLANS are subsumed into bridges to avoid conflicts peculiar to R9000)
- 5GHz (AC/N-Mixed); 2.4GHz (NG-Mixed) - both DD-WRT. <<<<
- Static, MAC-tied & DHCP allocated IPs
- CloudFare with 'Ignore WAN DNS' option
- OpenVPN Client with PBR for source IPs - P/Forwarding to 2nd router for OpenVPN Server.
- QoS (HFSC/SFC priorities set on MAC, Netmask & Interface)
_________________
Life is a journey; travel alone makes it less enjoyable and lonely.

habeIchVergessen
DD-WRT User

Joined: 04 May 2010
Posts: 431

Posted: Sat Oct 01, 2022 13:19 Post subject:

hardware: ea8500
software: 50308/50176 webupgrade

issues:
- no internet connection. ifconfig doesn't list vlan* interfaces. switch config seems to be valid

- back on 48081 (ubootenv + reboot) doesn't connect to internet too. powercycle is required to get internet back

Code:

root@router ~ $ ifconfig
br0 Link encap:Ethernet HWaddr 58:EF:68:xx:xx:xx
inet addr:192.168.10.13 Bcast:192.168.10.255 Mask:255.255.255.0
inet6 addr: fe80::1/64 Scope:Link
inet6 addr: fe80::5aef:68ff:fe58:6ef8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7983 errors:0 dropped:3 overruns:0 frame:0
TX packets:6996 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:962878 (940.3 KiB) TX bytes:1885108 (1.7 MiB)

brRadius Link encap:Ethernet HWaddr 58:EF:68:xx:xx:xx
inet addr:192.168.20.13 Bcast:192.168.20.255 Mask:255.255.255.0
inet6 addr: fe80::60fd:9bff:fe02:90e4/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:46 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:23020 (22.4 KiB)

eth0 Link encap:Ethernet HWaddr 58:EF:68:xx:xx:xx
inet6 addr: fe80::5aef:68ff:fe58:6ef8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:125 errors:0 dropped:0 overruns:0 frame:0
TX packets:1698 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:15789 (15.4 KiB) TX bytes:356567 (348.2 KiB)
Interrupt:101

eth1 Link encap:Ethernet HWaddr 58:EF:68:xx:xx:xx
inet6 addr: fe80::5aef:68ff:fe58:6ef8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1263 errors:0 dropped:0 overruns:0 frame:0
TX packets:2511 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:356688 (348.3 KiB) TX bytes:505105 (493.2 KiB)
Interrupt:102

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MULTICAST MTU:65536 Metric:1
RX packets:179 errors:0 dropped:0 overruns:0 frame:0
TX packets:179 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:13556 (13.2 KiB) TX bytes:13556 (13.2 KiB)

wlan0 Link encap:Ethernet HWaddr 58:EF:68:xx:xx:xx
inet6 addr: fe80::5aef:68ff:fe58:6efa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:336 errors:0 dropped:0 overruns:0 frame:0
TX packets:1987 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:52011 (50.7 KiB) TX bytes:414389 (404.6 KiB)

wlan0.1 Link encap:Ethernet HWaddr 5A:EF:68:xx:xx:xx
inet6 addr: fe80::58ef:68ff:fe58:6efa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:24536 (23.9 KiB)

wlan0.2 Link encap:Ethernet HWaddr 5E:EF:68:xx:xx:xx
inet6 addr: fe80::5cef:68ff:fe58:6efa/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:24428 (23.8 KiB)

wlan1 Link encap:Ethernet HWaddr 58:EF:68:xx:xx:xx
inet6 addr: fe80::5aef:68ff:fe58:6efb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7611 errors:0 dropped:0 overruns:0 frame:0
TX packets:8863 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1006735 (983.1 KiB) TX bytes:2514699 (2.3 MiB)

Code:

root@router ~ $ swconfig list
Found: switch0 - gpio-0
root@router ~ $ swconfig dev switch0 show
Global attributes:
enable_vlan: 0
enable_mirror_rx: 0
enable_mirror_tx: 0
mirror_monitor_port: 0
mirror_source_port: 0
disable_all_leds: ???
arl_age_time: 300
arl_table: address resolution table
Port 0: MAC 00:05:cd:xx:xx:xx
Port 0: MAC 00:09:52:xx:xx:xx
Port 0: MAC 68:54:5a:xx:xx:xx
Port 0: MAC fc:d4:36:xx:xx:xx
Port 0: MAC 58:b1:0f:xx:xx:xx
Port 0: MAC 58:ef:68:xx:xx:xx
Port 0: MAC 00:90:3e:xx:xx:xx
Port 0: MAC 02:87:09:xx:xx:xx
Port 3: MAC 00:09:52:xx:xx:xx
Port 4: MAC 02:87:09:xx:xx:xx
Port 4: MAC 74:bf:c0:xx:xx:xx
Port 4: MAC 00:05:cd:xx:xx:xx
Port 5: MAC f4:cc:55:xx:xx:xx
Port 5: MAC 00:1d:aa:xx:xx:xx
Port 6: MAC 00:1d:aa:xx:xx:xx
Port 6: MAC 58:b1:0f:xx:xx:xx
Port 6: MAC fc:d4:36:xx:xx:xx
Port 6: MAC f4:cc:55:xx:xx:xx
Port 6: MAC 00:90:3e:xx:xx:xx
Port 6: MAC 58:ef:68:xx:xx:xx
Port 6: MAC 68:54:5a:xx:xx:xx

igmp_snooping: 0
igmp_v3: 1
Port 0:
mib: ???
enable_eee: ???
igmp_snooping: 0
vlan_prio: 0
pvid: 2
link: port:0 link:up speed:1000baseT full-duplex
Port 1:
mib: ???
enable_eee: 0
igmp_snooping: 0
vlan_prio: 0
pvid: 1
link: port:1 link:up speed:10baseT full-duplex auto
Port 2:
mib: ???
enable_eee: 0
igmp_snooping: 0
vlan_prio: 0
pvid: 1
link: port:2 link:up speed:10baseT half-duplex auto
Port 3:
mib: ???
enable_eee: 0
igmp_snooping: 0
vlan_prio: 0
pvid: 1
link: port:3 link:up speed:100baseT full-duplex txflow rxflow auto
Port 4:
mib: ???
enable_eee: 0
igmp_snooping: 0
vlan_prio: 0
pvid: 1
link: port:4 link:up speed:1000baseT full-duplex txflow rxflow auto
Port 5:
mib: ???
enable_eee: 0
igmp_snooping: 0
vlan_prio: 0
pvid: 2
link: port:5 link:up speed:1000baseT full-duplex txflow rxflow auto
Port 6:
mib: ???
enable_eee: ???
igmp_snooping: 0
vlan_prio: 0
pvid: 1
link: port:6 link:up speed:1000baseT full-duplex
VLAN 1:
vid: 1
ports: 1 2 3 4 6
VLAN 2:
vid: 2
ports: 0 5

[/code]

egc
DD-WRT Guru

Joined: 18 Mar 2014
Posts: 12915
Location: Netherlands

Posted: Sat Oct 01, 2022 13:46 Post subject:

@grc, thanks for reporting

OpenVPN Status page display problem has been confirmed and noted.

Developers are aware and dealing with it Smile

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

IONK
DD-WRT Guru

Joined: 19 Aug 2011
Posts: 967

Posted: Sat Oct 01, 2022 13:51 Post subject:

Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r50308) / Linux 4.9.329 #1238 SMP Sat Oct 1 01:29:46 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r50274 std (09/27/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 40MHz, 802.11r (FT), DDNS (Dynu.com), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), CIFS Automount, WireGuard server, Cron / working
Issues/Errors: none
_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
▫ easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)

egc
DD-WRT Guru

Joined: 18 Mar 2014
Posts: 12915
Location: Netherlands

Posted: Sat Oct 01, 2022 13:56 Post subject:

@habeIchVergessen there are no VLAN interfaces any more since the updated .dts when we switched from one CPU port to two CPU ports.

eth0 is the WAN (vlan2)
eth1 is the LAN (vlan1 with br0 and radio's)

Did you reset to defaults after the switch was made (someone will surely look up with what build that was)
_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

MLandi
DD-WRT Guru

Joined: 04 Dec 2007
Posts: 1020

Posted: Sat Oct 01, 2022 14:30 Post subject:

Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r50308 std (10/01/22)
Previous/Reset: DD-WRT v3.0-r50274 std (09/27/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: No issues
_________________
Netgear R9000
DD-WRT v3.0-r55819 std (04/17/24)
Linux 4.9.337 #722 SMP Wed Apr 17 04:16:49 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps

mrjcd
DD-WRT Guru

Joined: 31 Jan 2015
Posts: 6291
Location: Texas

Posted: Sat Oct 01, 2022 15:13 Post subject:

egc wrote:

The EA8500 must be reset for any build after r49838
https://mrjcd.com/EA8500_DD-WRT/vlans/ Twisted Evil

ramblin
DD-WRT User

Joined: 03 Nov 2015
Posts: 317
Location: Florida, USA

Posted: Sat Oct 01, 2022 15:40 Post subject:

Router: Linksys ea8500 ..WDS AP
Firmware: DD-WRT v3.0-r50308 std (10/01/22)
Kernel: Linux 4.9.329 #1236 SMP Fri Sep 30 12:39:32 +07 2022 armv7l
Reset: NO .. GUI upgrade from r50274
Errors: NONE

Router: Linksys ea8500 ..WDS Stations ... X (2)
Firmware: DD-WRT v3.0-r50308 std (10/01/22)
Kernel: Linux 4.9.329 #1236 SMP Fri Sep 30 12:39:32 +07 2022 armv7l
Reset: NO .. GUI upgrade from r50274
Errors: NONE

FAST, Easy upgrades .. No issues ..Thanks DEVs !
_________________
......All GOOD here... Just Handshakes and Time Stamps !......

Goto page 1, 2 Next

Display posts from previous:

Page 1 of 2

DD-WRT Forum Index -> Atheros WiSOC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

New Build - 10/01/2022 - r50308

Quick Links

Log in