Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Fri Sep 30, 2022 8:22 Post subject:
Not exactly a fix per say, I sent @egc a pm, I simplified the buttons to make css smaller and easier to implement special button colors and didn't check the function after renaming the name="" attribute. Will fix now.
as a workaround for a short time only, the name="del_peer" attribute can be renamed to name="reboot_button" in browser dev tools and then it will work.
https://svn.dd-wrt.com/changeset/50307 _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Router/Version: Netgear R9000
File/Kernel: dd-wrt_r9000-webupgrade-r50274.bin
Previous/Reset: dd-wrt_r9000-webupgrade-r49599.bin
Mode/Status: working WDS AP
Issues/Errors: had to flash the router twice to get the webgui to work properly. QoS is erratic so I disabled it.
up 17 min
Last edited by johnnyNobody999 on Fri Sep 30, 2022 15:59; edited 1 time in total
Router/Version: Netgear R7800 (x4)
File/Kernel: dd-wrt-webupgrade-netgear_r7800-r50274-.bin
Previous/Reset: Mode/Status: operational WDS stations
Issues/Errors: had to flash one router twice to get the webgui to display properly.
@ccbrianf please share more details of your setup to give the developers a better chance to solve this.
I'm too ignorant to figure out how to work posting a PDF or the proper low resolution images, so hopefully this PDF to text conversion is adequate. Pretty vanilla and almost all recommended.
Code:
Firmware: DD-WRT v3.0-r50274 std (09/27/22)
Time: 12:57:45 up 1 day, 20:28, load average: 0.05, 0.07, 0.01
WAN IP: IP
Basic Settings Wireless Security MAC Filter wlan0-WDS wlan1-WDS
W i r e l e s s I n t e r f a c e w l a n 0 [ 2 . 4 G H z T u r b o Q A M ] - Q C A 9 9 X 0 8 0 2 . 1 1 a c - M a x V a p s ( 1 6 ) H e l p more...
Physical Interface wlan0 - SSID [SSID] HWAddr [MAC] Attention: It is recommended that you click
the Apply Settings button after you change a
Radio Mode AP (WDS) value in order to update the fields with the
corresponding parameters.
Network Mode Mixed
Channel Width Full (20 MHz)
Channel 6 - 2437 MHz
TurboQAM (QAM256) Enable X Disable
Service Set Identifier (SSID) SSID
SSID Broadcast X Enable Disable
Advanced Settings X
Firmware Type VANILLA
Domain UNITED_STATES
TX Power 16 dBm (Max 30)
Antenna Gain 0 dBi
U-APSD (Automatic Power Save) X Enable Disable
Disassoc Low ACK X Enable Disable
Noise Immunity X Enable Disable
QCA Q-Boost / TDMA Enable X Disable
SIFS Trigger Time 0 ms
Protection Mode RTS/CTS
RTS Threshold X Enable Disable
Threshold 2346
Airtime Policy Disabled
Short Preamble X Enable Disable
Short GI X Enable Disable
TX Antenna Chains 1+2+3+4
RX Antenna Chains 1+2+3+4
AP Isolation Enable X Disable
Beacon Interval 150
DTIM Interval 2
Airtime Fairness X Enable Disable
WMM Support X Enable Disable
ScanList default
Sensitivity Range / ACK Timing 1350 (Default: 500 meters)
You may choose from; Disabled, WEP, WPA
Security Mode WPA Personal, WPA Enterprise or RADIUS. All
devices on your network must use the same
Network Authentication WPA Algorithms security mode. With N-Mode you must use
WPA2/AES.
WPA Personal X CCMP-128 (AES)
There are two firmwares for the radio's DDWRT and VANILLA.
For the previous firmware I also tried DDWRT with the same crashing results.
You'd get a lot better bug reports if there were a simple command to retrieve the necessary information and protect sensitive information at the same time. I have no public web serving capabilities.
You'd get a lot better bug reports if there were a simple command to retrieve the necessary information and protect sensitive information at the same time. I have no public web serving capabilities.
This is actually a good idea. If logging is enabled, it would be cool to be able to save off the log from the GUI, the last booted log with two choices. Un-redacted IPs/MACs or Redacted IPs/MACs. Yeah, easy enough to do with one of many available scripts, but a button (or two) would be so efficient. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Wireless 5ghz only
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r55779
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r55799
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port. DD-WRT r55779
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
I'm too ignorant to figure out how to work posting a PDF or the proper low resolution images, so hopefully this PDF to text conversion is adequate. Pretty vanilla and almost all recommended.
Beacon Interval 150 also would go back to default 100 unless adjusting Beacon and DTIM for additional VAPs.
For each VAP enabled add 100 TU to Beacon, e.g. 1 VAP would be 200, and set DTIM to 1 for the same radio.
Logging is very easy, also Firefox print to save PDF. Though text was fine, easy to Ctrl+F search for capital X.
Large forum images are fixed but I still use postimages, imgbb, insert bbcode instead of adding attachments.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Sat Oct 01, 2022 9:24 Post subject: New Build - 09/27/2022 - r50274
Router/Version: TP-Link TL-WDR3600 v1.5
Kernel: Linux 3.10.108-d11 #117404 Tue Sep 27 04:29:21 +07 2022 mips
Reset: No
Mode: Internet gateway, WIFI 5GHz AP, dnsmasq, firewall
Issues: Some yellow marked events in logs, but it's nothing significant
Status: Working
Uptime: almost 4 days
Device working good. Stable and performance of device are without problems.
Router Model: TP-Link TL-WR841N v7.0
Firmware Version: DD-WRT v3.0-r50274 std (09/27/22)
Mode: AP/Client Mode
Reset: None required
Status: OK
Uptime: ~2 hours
Issues/Errors: httpd : Authentication fail
httpd : Request Error Code 401: Authorization required. Wrong username and/or password!
And wifi has dropped after 15-20 sec up so every time after 20-40 min. Also this problem exists on r48810 ,r44715, r50176.Now on r37961 wich working without issues.
Router Model: TP-Link TL-WR841N v7.0
Firmware Version: DD-WRT v3.0-r50274 std (09/27/22)
Mode: AP/Client Mode
Reset: None required
Status: OK
Uptime: ~2 hours
Issues/Errors: httpd : Authentication fail
httpd : Request Error Code 401: Authorization required. Wrong username and/or password!
And wifi has dropped after 15-20 sec up so every time after 20-40 min. Also this problem exists on r48810 ,r44715, r50176.Now on r37961 wich working without issues.
Steps to reproduce; Does this mean you are using wifi as both client / station mode with a VAP? Screenshots of settings to further troubleshoot the "issue". The httpd messages are benign debug information. We have several of this family of devices that have no wifi issues. Also:
