Need Help - connect with a obfuscation openvpn server

Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking
Author Message
alinkwok
DD-WRT Novice


Joined: 18 Nov 2018
Posts: 5

PostPosted: Sun Nov 18, 2018 14:02    Post subject: Need Help - connect with a obfuscation openvpn server Reply with quote
1. Use NordVPN ovpn file;

2. the file include content 'scramble obfuscate 'password' '


3. How can I use this ovpn file to config into DD-Wrt router to connect


Many thanks everybody that if you know the right configuration....
'
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12884
Location: Netherlands

PostPosted: Sun Nov 18, 2018 14:37    Post subject: Reply with quote
You could have asked Nord for instructions or just Google, but have a look here: https://nordvpn.com/nl/tutorials/dd-wrt/openvpn-gui/
_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
alinkwok
DD-WRT Novice


Joined: 18 Nov 2018
Posts: 5

PostPosted: Mon Nov 19, 2018 0:52    Post subject: Reply with quote
egc wrote:
You could have asked Nord for instructions or just Google, but have a look here: https://nordvpn.com/nl/tutorials/dd-wrt/openvpn-gui/



Thanks, I knew this guide, but there is no scramble obfuscate option to config.... Nord will not tell the detail about this config....
alinkwok
DD-WRT Novice


Joined: 18 Nov 2018
Posts: 5

PostPosted: Mon Nov 19, 2018 1:44    Post subject: Reply with quote
jxm wrote:
This might help - not that I have tried it...
https://wiki.dd-wrt.com/wiki/index.php/OpenVPN
Look for Scramble Patch by clayface

Good old Google does it again, got it on the first hit.

Cheers



Thanks a lot, actually I had search on Google and this article, and no sample with it.... Still wait for a new answer.
alinkwok
DD-WRT Novice


Joined: 18 Nov 2018
Posts: 5

PostPosted: Mon Nov 19, 2018 2:34    Post subject: Reply with quote
jxm wrote:
The instructions say to add
scramble obfuscate 'password'
To the Client and Server config files. NordVPN have presumably added it to their server. Have you tried adding that to the VPN client Additional Config?

Cheers



Tried, and failed. because in its ovpn file, there are some port foward

the ovpn file sample

---------------------------------
client
dev tun
remote ‘server‘ 53 udp
remote ‘server‘ 1198 udp
remote ‘server‘ 1214 udp
remote ‘server‘ 1215 udp
remote ‘server‘ 1216 udp
remote ‘server‘ 2231 udp
resolv-retry infinite
remote-random
nobind
tun-mtu 1500
tun-mtu-extra 32
mssfix 1450
persist-key
persist-tun
ping 15
ping-restart 0
ping-timer-rem
reneg-sec 0
comp-lzo no
server-poll-timeout 5

scramble obfuscate ‘password’
---------------------------------

How could I config the port forward several times and where can I insert the scramble obfuscate content in GUI mode? or how can I use some script?[/b][/i]
alinkwok
DD-WRT Novice


Joined: 18 Nov 2018
Posts: 5

PostPosted: Mon Nov 19, 2018 4:50    Post subject: Reply with quote
jxm wrote:
Are you for real? There is no port forwarding there. Where it says 'server' you put in the address (and port) of a server. This is where you list the server, sometimes servers, at your VPN provider that you want to connect to. You probably only need one. You will be given the server information from NordVPN. Some locations may have only one server, some may have several. A 'remote' line should look something like this:
remote nord-server-1 1194

The ”Scramble” line is an optional parameter that most people do not use unless they are in China or similar restrictive countries where the government blocks internet traffic to VPNs. “Scramble” disguises packets going to the VPN so they can evade detection. If you want to use the Scramble option, replace the word 'password' in the conf file line with the password supplied by NordVPN. Or you can delete the line or comment it out with a hash symbol (#) if you do not want to use Scramble or if NordVPN dis not supply you with a Scramble password

This might help you understand things a bit better https://github.com/OpenVPN/openvpn/blob/master/sample/sample-config-files/client.conf

If you can't figure it out now, perhaps you should pull up stumps.

Cheers




Yes, it's real, I used this ovpn profile could connect Nord by Tunnelblick or Android App. I download the xor_ovpn profile from the Nord. And use them can connect by Tunnelblick on MacOS or Android App.

Maybe I should try to use one port forward command to test your method that is adding scramble obfuscate 'password' on Additional config.. (yes, I have the profile so I have the obfs password.)
foz111
DD-WRT Guru


Joined: 01 Oct 2017
Posts: 707
Location: Earth

PostPosted: Tue Sep 27, 2022 21:14    Post subject: Reply with quote
Deleted my post as no longer relevant
_________________
Netgear R7800 PPPoE Main Router
Network IPV4 - Isolated Vlan's with IoT Devices. Unifi AC-Pro x 3 AP's, Router Wi-Fi Disabled. OVPN Server With Paid Commercial Wireguard Client's. Gateway Mode, DNSMasq, Static Leases & DHCP, Pi-Hole DNS & Running Unbound.

No one can build you the bridge on which you, and only you, must cross the river of life!
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Advanced Networking All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum