[blkt]

Welcome to Broadcom r49934 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49866 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
• mDNS/Avahi irqbalance Tor DoT Redirection PHP Asterisk OpenSSL FRR mac80211 Unbound SmartDNS ZFS Squid dnsmasq
• In-kernel Samba (ksmbd 3.4.4+++++) guest behavior selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r49934) / Linux 4.4.302-st25 #7141 SMP Sun Aug 28 00:10:07 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r49838 std (08/23/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF + DDNS (Dynu) + USB Storage (guide by egc) + WireGuard server + Cron / working
Issues/Errors: none

[egc]

Router Model: Linksys EA6900 (XVortex CFE)

Firmware Version: DD-WRT v3.0-r49934M Community Build (08/28/22)
Kernel Version: Linux 4.4.302-st25 #1 SMP Sun Aug 28 09:18:31 CEST 2022 armv7l

Upgraded: DD-WRT v3.0-r49626M Community Build (08/03/22)via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)

Reset: No not this time.

Configuration: Default gateway mode, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
WireGuard client running with PBR.
OpenVPN client with PBR running.
NVRAM size 47K (NVRAM size should not be a problem with the Xvortex CFE)

Status: Up and stable for 2 hours

Errors: none so far

Thanks BS!!

[r7000-2]

Router/Version: Netgear R7000
File/Kernel: Linux 4.4.302-st25 #7141 SMP Sun Aug 28 00:10:07 +07 2022 armv7l
Previous/Reset: 08-24-2022-r49866 / No
Mode/Status: RIP2 Router, IPv4/IPv6, Routed WiFi
Issues/Errors: None

Previously mentioned issue with 08-24-2022-r49866 in Status/Wireless/Wireless Nodes is fixed.

[marbss]

Router/Version: TP-Link Archer c9 v2
File/Kernel: DD-WRT v3.0-r49934 std (08/28/22)/ Linux 4.4.302-st25 #7143 SMP Sun Aug 28 04:45:52 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r49866 std (08/24/22) / Yes after flashing from GUI
Mode/Status: Gateway, OpenVPN server, DDNS, static IPs, access restrictions (block kids devices at bedtime using MAC address), UPnP, port forwarding, IPv6 with prefix delegation / Up for 2hrs
Issues/Errors: Access restrictions not working. Can anyone else verify this?

[RobrPatty]

Netgear R8500
Firmware Version DD-WRT v3.0-r49934 std (08/28/22)
Kernel Version Linux 4.4.302-st25 #7147 SMP Sun Aug 28 05:07:55 +07 2022 armv7l
Current Time Sun, 28 Aug 2022 08:01:20
Uptime 0 min
GUI over 49866
Reset: no
Issues: upgrade fine

Thank you BS & Devs

[PaulGo]

Router/Version: Netgear R7000P
Firmware Version: DD-WRT v3.0-r49934 std (08/28/22)
Kernel Version: Linux 4.4.302-st25 #7147 SMP Sun Aug 28 05:07:55 +07 2022 armv7l
Previous/Reset: r49838 / no reset
Mode/Status: Gateway / Working
Issues/Errors: None

[G29]

Router/Version:
Netgear / R6300V2
File/Kernel:
https://ftp.dd-wrt.com/dd-wrtv2/downloads/betas/2022/08-28-2022-r49934/netgear-r6300v2/netgear-r6300v2-webflash.bin
Linux 4.4.302-st25 #7141 SMP Sun Aug 28 00:10:07 +07 2022 armv7l
Firmware:
DD-WRT v3.0-r49934 std (08/28/22)
Previous/Reset:
r49681 / No Reset
Mode/Status:
Switch (future NAS) / Working
Issues/Errors:
None / None

Note: wl0-Advanced and wl1-Advanced Radio Time Restrictions issues reported in last build appear to be working.

[twindragon6]

Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r49934 std (08/28/22)
Kernel: Linux 4.4.302-st25 #7141 SMP Sun Aug 28 00:10:07 +07 2022 armv7l
Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info.
Reset: Nope.
Previous: 08-23-2022-r49838
Status: Working so far; certain cat commands for example cat /proc/cpuinfo do not work from the Administration> Commands> Command Shell Box, still testing.
wl: 14E4:4360
Temperatures: CPU 68.6 °C / WL0 54.5 °C / WL1 55.8 °C
Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.


The FTP is having issues:

Connection failed.
OOPS: cannot change directory:/mnt/downloads/www/dd-wrtv2/downloads

[fox95]

Bad.

Netgear R8500 on this version and it has bad wifi. This means you connect to the network but will have no internet access.

I have a netgear r6400 running aide by side to it with the same dd version and i it runs fine. All clients on the r8500 have internet access for a short period but then nothing.

So they then switch the the the netgear r6400
And it gets them back on the net.


The r6400 is the crappiest router i own and its for all my iot camera junk etc… and it seems to be the most reliable. No drops and consistent access to web