New Build - 08/24/2022 - r49866

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4585

PostPosted: Wed Aug 24, 2022 6:12    Post subject: New Build - 08/24/2022 - r49866 Reply with quote
Welcome to Broadcom r49866 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49838 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
mDNS/Avahi NTFS-3G irqbalance Tor DoT Redirect PHP Asterisk OpenSSL FRR mac80211 Unbound SmartDNS dnsmasq ZFS
In-kernel Samba (ksmbd 3.4.4+++++) guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try station or repeater mode but YMMV.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version:[/b]
[b]File/Kernel:[/b]
[b]Previous/Reset:[/b]
[b]Mode/Status:[/b]
[b]Issues/Errors:[/b]
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 647

PostPosted: Wed Aug 24, 2022 7:15    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r49866) / Linux 4.4.302-st25 #7087 SMP Wed Aug 24 01:56:03 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r49838 std (08/23/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + DDNS (Dynu) + USB Storage (guide by egc) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2022): https://politepol.com/fd/BU5UpNmf6NRW
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 List of reference threads, how-tos, and otherwise (Moderator's Pick 🌟)
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 566

PostPosted: Wed Aug 24, 2022 8:04    Post subject: Reply with quote
Router/Version: Asus RT-N66U
File: dd-wrt.v24-49866_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r49866 big (08/24/22) (prev. DD-WRT v3.0-r49838 big (08/23/22))
Kernel: Linux 4.4.302-st25 #18180 Wed Aug 24 03:44:59 +07 2022 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: Installed an hour ago, ok.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10799
Location: Netherlands

PostPosted: Wed Aug 24, 2022 16:40    Post subject: Reply with quote
Router Model: Linksys E1200 v1.0

Firmware Version: DD-WRT v3.0-r49866 mini (08/24/22)
Kernel Version: Linux 2.6.24.111 #28359 Wed Aug 24 00:54:32 +07 2022 mips

Upgraded: from DD-WRT v3.0-r49741
Reset: Yes, reset to factory defaults

Status: Broken

Errors: Yes, DNSMasq is not running and manual restarting does not help, the last build working was 49681, before that the same problem already for 9 months

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Wed Aug 24, 2022 20:20    Post subject: Reply with quote
Netgear R8500
Firmware Version DD-WRT v3.0-r49866 std (08/24/22)
Kernel Version Linux 4.4.302-st25 #7093 SMP Wed Aug 24 02:41:56 +07 2022 armv7l
Current Time Wed, 24 Aug 2022 13:51:20
Uptime 3 min
GUI over 49838
Reset: No
Issues: None

Thank you BS & Devs
Lanchon
DD-WRT Novice


Joined: 05 Oct 2019
Posts: 20

PostPosted: Thu Aug 25, 2022 4:18    Post subject: Reply with quote
BUG: DHCP does not work on mini K2.6 devices.

bug exists in: dd-wrt.v24-49866_NEWD-2_K2.6_mini_wrt160nv3.bin

this was diagnosed and fixed in a test build here:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1269400#1269400
(tested by me to fix the issue)

but the fix was never merged and official builds continue to exhibit this fault.

please let me know if/when you want me to test an official build.
thanks!
G29
DD-WRT Novice


Joined: 25 Aug 2022
Posts: 4

PostPosted: Thu Aug 25, 2022 8:57    Post subject: Reply with quote
Newbie Warning: YES - 1st post

Router Model: Netgear R6300V2 (*** hardware may be too old ***)

Firmware Version: DD-WRT v3.0-r49866 std (08/24/22)
Kernel Version: Linux 4.4.302-st25 #7087 SMP Wed Aug 24 01:56:03 +07 2022 armv7l
Factory Reset: Yes, via GUI
GUI Flash: Yes

Issues: Yes
    Can't disable WiFi/Radio.
    Radio Time Restrictions form does NOT take user entry, missing 24 hour settings bar.
    Functionality returned after back flashing Firmware version: DD-WRT v3.0-r48218 std (01/28/22)


Last edited by G29 on Fri Aug 26, 2022 7:09; edited 1 time in total
KACTET
DD-WRT Novice


Joined: 01 May 2022
Posts: 32

PostPosted: Thu Aug 25, 2022 10:23    Post subject: Reply with quote
Router/Version: Linksys WRT54GL v1.1
File/Kernel: dd-wrt.v24 mini generic r49866 / Linux 2.4.37 #69336 Wed Aug 24 01:04:23 +07 2022 mips
Previous/Reset: dd-wrt.v24 mini generic r49547 / yes
Mode/Status: Gateway / NON-Operational
Issues/Errors: DHCP Server Enabled - Stopped

DNSMasq is not running Crying or Very sad
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 399
Location: Ottawa, Ontario, Canada

PostPosted: Thu Aug 25, 2022 12:43    Post subject: Reply with quote
Firmware: v3.0-r49866 std (08/24/22)
Router/Version: Netgear R7000
Kernel: Linux 4.4.302-st25 #7087 SMP Wed Aug 24 01:56:03 +07 2022 armv7l
Previous: v3.0-r49838 std (08/23/22)
Mode/Status: AP wired and wireless / Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 63.6 °C / WL0 47.6 °C / WL1 52.6 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325). Wink

Upload and Download speeds are to ISP spec (500/500 Mbps).

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r50963 std (11/28/22)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 5
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 13112
Location: Texas, USA

PostPosted: Thu Aug 25, 2022 13:32    Post subject: Reply with quote
KACTET wrote:
Router/Version: Linksys WRT54GL v1.1
File/Kernel: dd-wrt.v24 mini generic r49866 / Linux 2.4.37 #69336 Wed Aug 24 01:04:23 +07 2022 mips
Previous/Reset: dd-wrt.v24 mini generic r49547 / yes
Mode/Status: Gateway / NON-Operational
Issues/Errors: DHCP Server Enabled - Stopped

DNSMasq is not running Crying or Very sad

See my comment in the 49838 thread:

kernel-panic69 wrote:
@KACTET: Do you have static leases set up?
What is the output of:

Code:
nvram show | grep dnsmasq | sort
nvram show | grep dhcp | sort

I don't remember what all has been discussed, but this is probably something that can be tracked down via PuTTY.

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
At some point, people just get plain tired of this place.
Because they are tired of bottom-feeders and the same old hat.

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
Enverex
DD-WRT Novice


Joined: 09 Jan 2011
Posts: 2

PostPosted: Thu Aug 25, 2022 15:35    Post subject: Reply with quote
Router/Version: Nighthawk R7000
File/Kernel: netgear-r7000-webflash.bin / Linux 4.4.302-st25 #7087 SMP Wed Aug 24 01:56:03 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r40270M kongac 2019-07-11 / No
Mode/Status: AP / Dead

Errors:

Required a hard reset to bring back to life but once reconfigured from scratch, it was fine. Clearly it didn't like the old config but that's not too unexpected given the age.

Issues:

Cannot save anything on the WiFi advanced pages (wl0-Advanced / wl1-Advanced) due to a Javascript error on the page:
Code:
Uncaught SyntaxError: expected expression, got '<'Wireless_Advanced-wl0.asp:23:5718
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10799
Location: Netherlands

PostPosted: Thu Aug 25, 2022 16:01    Post subject: Reply with quote
Enverex wrote:
Router/Version: Nighthawk R7000
File/Kernel: netgear-r7000-webflash.bin / Linux 4.4.302-st25 #7087 SMP Wed Aug 24 01:56:03 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r40270M kongac 2019-07-11 / No
Mode/Status: AP / Dead

Errors:

Required a hard reset to bring back to life but once reconfigured from scratch, it was fine. Clearly it didn't like the old config but that's not too unexpected given the age.

Issues:

Cannot save anything on the WiFi advanced pages (wl0-Advanced / wl1-Advanced) due to a Javascript error on the page:
Code:
Uncaught SyntaxError: expected expression, got '<'Wireless_Advanced-wl0.asp:23:5718


Is already fixed and will be in next build.

Indeed coming from such an old build a reset after upgrade and rebuild form scratch is recommended Smile

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10799
Location: Netherlands

PostPosted: Fri Aug 26, 2022 16:24    Post subject: Reply with quote
Lanchon wrote:
BUG: DHCP does not work on mini K2.6 devices.

bug exists in: dd-wrt.v24-49866_NEWD-2_K2.6_mini_wrt160nv3.bin

this was diagnosed and fixed in a test build here:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1269400#1269400
(tested by me to fix the issue)

but the fix was never merged and official builds continue to exhibit this fault.

please let me know if/when you want me to test an official build.
thanks!


This DNSMasq problem (different from the last time, this one had to do with a new DNSMasq version which does not play nice with an older compiler) should be solved.

BS is making a test build so that I can do the final testing, I am confident we will have DNSMasq running again on all builds very soon Smile

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
r7000-2
DD-WRT Novice


Joined: 23 May 2022
Posts: 48

PostPosted: Fri Aug 26, 2022 19:51    Post subject: Reply with quote
Router/Version: Netgear R7000
File/Kernel: Linux 4.4.302-st25 #7087 SMP Wed Aug 24 01:56:03 +07 2022 armv7l
Previous/Reset: 08-15-2022-r49741 / No
Mode/Status: Router RIP2, IPv4/IPv6, Guest WiFi
Issues/Errors: Status/Wireless/Wireless Nodes is not showing connected clients, lower (compared to Netgear R7800 08-15-2022-r49741) WiFi speed on 5G radio

_________________
Few NetGears with Broadcom
Couple Netgears with Atheros
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10799
Location: Netherlands

PostPosted: Sat Aug 27, 2022 8:14    Post subject: Reply with quote
egc wrote:
Lanchon wrote:
BUG: DHCP does not work on mini K2.6 devices.

bug exists in: dd-wrt.v24-49866_NEWD-2_K2.6_mini_wrt160nv3.bin

this was diagnosed and fixed in a test build here:
https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1269400#1269400
(tested by me to fix the issue)

but the fix was never merged and official builds continue to exhibit this fault.

please let me know if/when you want me to test an official build.
thanks!


This DNSMasq problem (different from the last time, this one had to do with a new DNSMasq version which does not play nice with an older compiler) should be solved.

BS is making a test build so that I can do the final testing, I am confident we will have DNSMasq running again on all builds very soon Smile


I just tested alpha build 49909 and DNSMasq is running again on my old K2.6 Linksys E1200v1

The problems with Saving/Applying on pages should also be solved.

Unless there are other showstoppers found we could have a new public build later today Smile

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum