Posted: Sat Aug 13, 2022 8:57 Post subject: New Build - 08/13/2022 - r49681
Welcome to Atheros r49681 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
1. My NTFS 5TB HDD shows up as 18TB and it says 8TB free of 18TB total
This issue has been ongoing since I guess 4 months already, but I was always in hope with the next build it will be fixed.
2. My HDD does not show up on Android Devices or TV's. The Samba won't appear. On PC it is visible. I have to use special App such as Xplorer in order to find it. However, usually it should just appear. On the TV I even do not have that chance.
3. My NTFS hard disk (5tb) casually (after restart of router) won't be visible anymore, rather a different partition appears (15mb)
4. My old Xbox One can not connect to WIFI, that only appears to my WIFI, if I connect to other WIFI or to my hotspot no issues at all. My hotspot has same SSID and PSW and it connects immediately. Probably, this is rather an Xbox issue than dd-wrt, but worth to mention.
Linksys EA8500---main gateway
DD-WRT v3.0-r49681 std (08/13/22)
Linux 4.9.325 #1124 SMP Sat Aug 13 07:24:00 +07 2022 armv7l
GUI install over r49677
she is all worky nicely
and to add --> I installed r49677 on Daughter's new EA8500 yesterday
over r49626. They are very happy using a gazzion wireless devices of all types/brands.
Nothing is wired to their EA8500 but the ONT
#
Netgear WNDR3700 V4
DD-WRT v3.0-r49681 std (08/13/22)
Linux 3.18.140-d6 #150058 Sat Aug 13 13:24:19 +07 2022 mips
GUI install over r49677
switch & ovpn server -- all worky good
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49681 std (08/13/22)
Kernel Version Linux 4.9.325 #642 SMP Tue Aug 9 12:32:12 +07 2022 armv7l
Current Time Sat, 13 Aug 2022 06:56:49
Uptime 2 min
GUI over 49677
Reset: no
Issues: works good
Issues: Wifi doesn't turn on according to schedule if router is rebooted while wifi is turned off.
1) Disable Wifi on 2.4 GHz completely.
2) Set up Wifi schedule for 5 GHz.
3) Once Wifi turns off (according to schedule), reboot router.
4) Wifi will never turn on again, unless rebooted 2+ times during a time when Wifi is scheduled to be on.
Joined: 16 Mar 2019 Posts: 353 Location: Szczecin, Poland EU
Posted: Mon Aug 15, 2022 11:18 Post subject: New Build - 08/13/2022 - r49681
Router/Version:TP-Link TL-WDR3600 v1.5
Kernel:Linux 3.10.108-d11 #113925 Sat Aug 13 10:28:34 +07 2022 mips
Reset:No
Mode:Internet gateway, WIFI 5GHz, dnsmasq server, firewall
Status: Working
Issues: Sometimes device have lost connection on switch ports, during WAN & WIFI working correctly
Uptime: 48 h
Sometimes device have lost connection on switch ports, during WAN & WIFI working correctly. I'm fix that problem with start GUI via wireless connection and click reboot button. After restart router working good. Generic performance of device is rather good. I'm attach reports of device.
1. My NTFS 5TB HDD shows up as 18TB and it says 8TB free of 18TB total
This issue has been ongoing since I guess 4 months already, but I was always in hope with the next build it will be fixed.
2. My HDD does not show up on Android Devices or TV's. The Samba won't appear. On PC it is visible. I have to use special App such as Xplorer in order to find it. However, usually it should just appear. On the TV I even do not have that chance.
3. My NTFS hard disk (5tb) casually (after restart of router) won't be visible anymore, rather a different partition appears (15mb)
4. My old Xbox One can not connect to WIFI, that only appears to my WIFI, if I connect to other WIFI or to my hotspot no issues at all. My hotspot has same SSID and PSW and it connects immediately. Probably, this is rather an Xbox issue than dd-wrt, but worth to mention.
5. Slower Transfer Speed (files from PC to NAS).
@FireStorm@ Please be more precise regarding your (samba assumed) setup. But anyway, I have experienced and reported the same behaviour (on samba client side, inconsistent NTFS shared volume reported size). May I precise that the problem is not NTFS related, it also appears with other filesystems.
Don't know whether other users are experiencing it or not, but I think we have to live with it. If you can, please use another device, as a NAS configured as samba server for such service. I am presently using an old router, working with dd-wrt r48540 for such service. Well it's not as speedy as a dedicated NAS, but it's working fine !