New Build - 08/10/2022 - r49677

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4585

PostPosted: Wed Aug 10, 2022 5:46    Post subject: New Build - 08/10/2022 - r49677 Reply with quote
Welcome to Atheros r49677 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49626 (mirror)

OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
mDNS/Avahi htop snmp NTFS-3G irqbalance Tor DoT Redirect SmartDNS PHP Asterisk OpenSSL Unbound frr ZFS mac80211
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version:[/b]
[b]File/Kernel:[/b]
[b]Previous/Reset:[/b]
[b]Mode/Status:[/b]
[b]Issues/Errors:[/b]
Sponsor
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 4585

PostPosted: Wed Aug 10, 2022 8:10    Post subject: Reply with quote
Router/Version: Linksys EA8500 / Box Rev. A00 PCB REV:205(XC) hw_rev=1 hw_ver=XB / r49677 (08/10/22)
File/Kernel: CLI Flash dd-wrt-webupgrade.bin / Linux 4.9.325 #1120 SMP Wed Aug 10 01:59:02 +07 2022 armv7l
Previous/Reset: r49626 (08/03/22) / No
Mode/Status: AP Gateway / VaNiLLa Mixed 20 MHz Ch 1 & 149 TX Power 30 dBm Short Preamble, ttraff disabled
Issues/Errors: No / No

10.4-ddwrt-9980-tW-13-6733 api 5 features mfp,peer-flow-ctrl,allows-mesh-bcast,peer-fixed-rate crc32 386171cd
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5946
Location: Texas

PostPosted: Wed Aug 10, 2022 10:07    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r49677 std (08/10/22)
Linux 4.9.325 #1120 SMP Wed Aug 10 01:59:02 +07 2022 armv7
scp 'firmware.bin' install over r49671
all worky good ...uptime 11:36

#

Netgear WNDR3700 V4
DD-WRT v3.0-r49677 std (08/10/22)
Linux 3.18.140-d6 #149916 Wed Aug 10 08:03:14 +07 2022 mips
scp 'firmware.bin' install over r49671
all ok ...uptime 7:15
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 647

PostPosted: Wed Aug 10, 2022 10:47    Post subject: Reply with quote
Router/Version: Netgear XR500 (Install guide by egc)
File/Kernel: dd-wrt-webupgrade.bin (r49677) / Linux 4.9.325 #1122 SMP Wed Aug 10 02:20:43 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r49626 std (08/03/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 40MHz, 802.11r (FT), DDNS (Dynu), 802.11 encapsulation offloading, ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2022): https://politepol.com/fd/BU5UpNmf6NRW
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 List of reference threads, how-tos, and otherwise (Moderator's Pick 🌟)
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Wed Aug 10, 2022 12:03    Post subject: Reply with quote
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49677 std (08/10/22)
Kernel Version Linux 4.9.325 #642 SMP Tue Aug 9 12:32:12 +07 2022 armv7l
Current Time Wed, 10 Aug 2022 06:00:46
Uptime 2 min
GUI over 49626
Reset: no
Issues: all good

Thank you BS & Devs
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 165
Location: Maharashtra, India

PostPosted: Wed Aug 10, 2022 12:21    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r49677 std (08/10/22)
Kernel: Linux 4.9.325 #1122 SMP Wed Aug 10 02:20:43 +07 2022 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using CLI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r49626 std (08/03/22)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, NTP TimeSync, WireGuard, Samba
Status: Stable, Working Fine with some issues; running DD-WRT firmware type for 2.4ghz & 5ghz, uptime 24+ Hrs.

I have connected two USB devices (one pen drive for YAMon) & other for Songs NAS. on every reboot the Device address changes anything from SDA to SDC for USB HDD. The pendrive partions mount correctly as they are named opt & jffs. but due to this the SAMBA share does not work as it points to non-existant ID. after every reboot, I have to manually set all shares again. happening since build 49626
my usb settings are shown in image


Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 805

PostPosted: Wed Aug 10, 2022 12:29    Post subject: Reply with quote
Update method: SSH / CLI using PuTTY
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r49626 std (08/03/22)
Previous/Reset: DD-WRT v3.0-r49626 std (08/03/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: No issues

_________________
Netgear R9000 X10
DD-WRT v3.0-r50963 std (11/28/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
2.4GHz: VANILLA Firmware, Airtime Fairness Enabled, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: VANILLA Firmware, Airtime Fairness Enabled, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10786
Location: Netherlands

PostPosted: Wed Aug 10, 2022 12:32    Post subject: Reply with quote
abhijitat wrote:
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r49677 std (08/10/22)
Kernel: Linux 4.9.325 #1122 SMP Wed Aug 10 02:20:43 +07 2022 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using CLI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r49626 std (08/03/22)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, NTP TimeSync, WireGuard, Samba
Status: Stable, Working Fine with some issues; running DD-WRT firmware type for 2.4ghz & 5ghz, uptime 24+ Hrs.

I have connected two USB devices (one pen drive for YAMon) & other for Songs NAS. on every reboot the Device address changes anything from SDA to SDC for USB HDD. The pendrive partions mount correctly as they are named opt & jffs. but due to this the SAMBA share does not work as it points to non-existant ID. after every reboot, I have to manually set all shares again. happening since build 49626
my usb settings are shown in image


Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.


Unfortunately that is a known long standing problem, you have to mount manually to get the same mount point.
There is a script (I think from @eibgrad) to do that somewhere will see if I can find it.

Edit: it might be this one: https://pastebin.com/VDZ32r2D

_________________
Routers:Netgear R7800, R7000, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
r7000-2
DD-WRT Novice


Joined: 23 May 2022
Posts: 48

PostPosted: Wed Aug 10, 2022 12:45    Post subject: Reply with quote
Router/Version: Netgear R7800
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.325 #1122 SMP Wed Aug 10 02:20:43 +07 2022 armv7l
Previous/Reset: Firmware: DD-WRT v3.0-r49567 std (07/27/22) / No
Mode/Status: RIP2 router with multiple IPv4 subnets, wireguard / working
Issues/Errors: None

_________________
Few NetGears with Broadcom
Couple Netgears with Atheros
ArjenR49
DD-WRT Guru


Joined: 05 Oct 2008
Posts: 531
Location: Helsinki, Finland

PostPosted: Wed Aug 10, 2022 12:52    Post subject: Reply with quote
This is part of my startup script which takes care of getting the same device names for various drives and partitions. Currently I don't use it, but at the time I put quite some effort in it. Perhaps @abhijitat has some use for it. There are probably just about enough comments to decypher it.
r7000-2
DD-WRT Novice


Joined: 23 May 2022
Posts: 48

PostPosted: Wed Aug 10, 2022 14:43    Post subject: Reply with quote
Router/Version: Netgear Nighthawk X10 R9000
File/Kernel: (R9000-)factory-to-ddwrt.img / Linux 4.9.325 #642 SMP Tue Aug 9 12:32:12 +07 2022 armv7l
Previous/Reset: Original Netgear firmware v 1.0.5.36 / No
Mode/Status: Gateway / working
Issues/Errors: None. (cosmetic error in Netgear firmware while applying DD-WRT. This must be related to the version coded in DD-WRT image:
"Warning! You are trying to download firmware with version V1.0.1.36 which is older than the firmware with version V1.0.5.36 you had. Do you want to continue?")

Will continue with configuration in RIP2 (works), IPv4/IPv6 (works), Guest WiFi in all 3 radios (all good except 6G radio doesn't work, see below), wireguard (TBD), remote logging/SNMP (works) and switch ports configuration 10G SFP+ included.

802.1ad 6G radio:
Interface wlan2
MAC Address <removed>
Chipset WIL6210 802.11ad
Radio Status Active
Radio Mode AP
Network AD Only
SSID test-6g
Channel 2 (60480 MHz)
TX Power 0 dBm
Rate Auto
ACK Timing N/A
Encryption - Interface giwifi0 Disabled
Connected Clients 0

_________________
Few NetGears with Broadcom
Couple Netgears with Atheros


Last edited by r7000-2 on Wed Aug 10, 2022 17:59; edited 1 time in total
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 165
Location: Maharashtra, India

PostPosted: Wed Aug 10, 2022 15:17    Post subject: Reply with quote
ArjenR49 wrote:
This is part of my startup script which takes care of getting the same device names for various drives and partitions. Currently I don't use it, but at the time I put quite some effort in it. Perhaps @abhijitat has some use for it. There are probably just about enough comments to decypher it.


Thanks a lot, this solved my problem.

I would also like to thank @egc for the effort he took for finding the script and pointing me in right direction. I can see that your script also has inputs from @egc.

I am mainly a windows person. Not too acquainted to Linux, but in this forum I have actually learned a lot with help of Gurus & user who are willing to help like yourself.
MesMurized
DD-WRT User


Joined: 08 Aug 2017
Posts: 59

PostPosted: Wed Aug 10, 2022 16:14    Post subject: Reply with quote
Router Name: R9000-DD-WRT
Router Model: Netgear Nighthawk X10
Firmware: DD-WRT v3.0-r49677 std (08/10/22)
Kernel: 4.9.325 #642 SMP Tue Aug 9 12:32:12 +07 2022
Prior: r49599, How: CLI, Reset: No, Uptime: 30 min
CPU Clock: 1600 MHz, Load Average: 4% 0.12, 0.19, 0.17
Temperatures: CPU 33.0 °C / wlan0 36 °C / wlan1 39 °C
Services: GW, AP, OVPN w/PBR, VLAN, Vanilla, Static leases, Access Lists, MAC filters, Blacklist, Samba, Wireguard (standby)

Another smoooth update. Thanks 👍

_________________
Current: NetgearR9000 v3.0-r50146 std (09/10/22)
Retired: Linksys WRT32X r39296, TP-Link Archer C7 v2, LinkSys WRT54G v5
MesMurized
DD-WRT User


Joined: 08 Aug 2017
Posts: 59

PostPosted: Thu Aug 11, 2022 2:10    Post subject: Reply with quote
Update 9+ hrs after install:
Status/LAN device not updating traffic count correctly.

A couple hours after updating I starting watching a live video stream (on a PBR IP/route) that typically uses 1-2GB/hr. Three or four hours later I checked status/LAN and the device showed less than 50MB. Huh?? Should be min 5GB. Updating correctly now (850MB while writing this post.

Maybe lookie lookie triggered the count?
Minor issue. Just surprised, rarely see any issue

_________________
Current: NetgearR9000 v3.0-r50146 std (09/10/22)
Retired: Linksys WRT32X r39296, TP-Link Archer C7 v2, LinkSys WRT54G v5
Zyxx
DD-WRT Guru


Joined: 28 Dec 2018
Posts: 566

PostPosted: Thu Aug 11, 2022 6:31    Post subject: Reply with quote
Router/Version: Netgear R7800
File: dd-wrt-webupgrade.bin
Firmware: DD-WRT v3.0-r49677 std (08/10/22) (prev. DD-WRT v3.0-r49626 std (08/03/22))
Kernel: Linux 4.9.325 #1122 SMP Wed Aug 10 02:20:43 +07 2022 armv7l
Mode: Gateway, SFE disabled, 2.4G and 5G wifi, Wireguard for external access, WAN to 4G (DHCP Client), Keep Alive reboot 6:02 in the morning
Reset: No
Status: Installed at release, ok.
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum