Posted: Wed Aug 03, 2022 7:56 Post subject: New Build - 08/03/2022 - r49626
Welcome to Atheros r49626 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, SB, WDS, Mesh) and applicable configurations to reproduce.
Joined: 18 Mar 2014 Posts: 10809 Location: Netherlands
Posted: Wed Aug 03, 2022 8:39 Post subject:
Router Model: Linksys EA8500
Firmware Version: DD-WRT v3.0-r49626M Community Build by EGC (08/02/22)
Upgraded from: DD-WRT v3.0-r49492M Community Build by EGC (07/14/22)
Reset: No not this time
Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working.
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49626 std (08/03/22)
Kernel Version Linux 4.9.325 #641 SMP Mon Aug 1 01:49:41 +07 2022 armv7l
Current Time Wed, 03 Aug 2022 08:14:24
Uptime 1 min
GUI over 49599
Thank you BS & Devs
Seems with each new build router becomes more and more stable. Kudos to DD-WRT
Status: Up and running for 6 hours, basic setup as Gateway, static leases, port forwarding DDNS, WOL 2,4GHz, VAP for IoT, 5Ghz (Vanilla Firmware, Disabled Airtime),
On demand governor with minimum 800 MHz
Errors: Yes One of the IoT devices would no longer connect unless I changed Network Mode from N/G mixed to Mixed, my previous build (49492) did not had that problem.
(The IoT devices are on a 2.4 GHz unbridged VAP)
Minor UI issue, not serious. On the Status, LAN and Status, Wireless, the bottom panel that holds buttons is fixed to the bottom of the web page with the content of the page scrolling behind it. All other UI pages have the button panel fixed to the bottom of the page content and it will scroll off the page when the user scrolls up to the top of the page. _________________ Netgear R9000 X10
DD-WRT v3.0-r50963 std (11/28/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
2.4GHz: VANILLA Firmware, Airtime Fairness Enabled, NG-Mixed, ACK Timing 3150, WPA2 w/AES
5GHz: VANILLA Firmware, Airtime Fairness Enabled, AC/N Mixed, ACK Timing 3150, WPA2 w/AES
Linksys EA8500... main gateway
DD-WRT v3.0-r49626 std (08/03/22)
Linux 4.9.325 #1095 SMP Tue Aug 2 16:59:08 +07 2022 armv7l
GUI install over r49599
both radios good plus ...VAPs on both with VLAN on port 4 via br1
QOS = HFSC CAKE
few ports forwarded
SAMBA share ext4 32GB flash drive
ssh access only via RSA 3072 key
had a lil snafu with unbound while back so turned him off
DNS = 184.108.40.206 (Verisign)
DNS = 220.127.116.11 (Verisign)
DNS = 18.104.22.168 (OpenNIC)
they do DNSSC anyways & never give me troubles
yeahuh I don't use ISP DNS
uptime --> 21:53
she all worky very well
she ain't been reset in long long time... yeahuh -- I use Vanilla FW both radios.
FedEx just dropped a NEW EA8500 on front porch 'bout 30 min ago so I gotta get DD-WRT on her right quick
Joined: 31 Jul 2021 Posts: 2143 Location: All over YOUR webs
Posted: Wed Aug 03, 2022 19:34 Post subject:
Minor UI issue, not serious. On the Status, LAN and Status, Wireless, the bottom panel that holds buttons is fixed to the bottom of the web page with the content of the page scrolling behind it. All other UI pages have the button panel fixed to the bottom of the page content and it will scroll off the page when the user scrolls up to the top of the page.