[blkt]

Welcome to Marvell r49531 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49492 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• WRT1200AC, WRT1200AC V2, WRT1900AC, WRT1900AC V2, WRT1900ACS, WRT1900ACS V2, WRT3200ACM and WRT32X.
• mDNS/Avahi fr htop SNMP NTFS-3G Unbound irqbalance Tor DoT Redirect SmartDNS PHP Asterisk OpenSSL mac80211 ZFS
• In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
• Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[saphirely]

Linksys WRT1900ACS
Firmware:v3.0-r49531 std (07/20/22)
Kernel:4.9.323 #3310 SMP Wed Jul 20 04:33:37 +07 2022 armv7l

Work stable!
Upgrade via CUI from r49492 without reset.

[papagdog]

Router/Version: WRT3200ACM/Firmware: DD-WRT v3.0-r49531 std (07/20/22)
Time: 14:25:46 up 4 min, load average: 0.18, 0.15, 0.07
File/Kernel: GUI Upgrade/Linux version 4.9.323 (root@server2) (gcc version 11.1.0 (OpenWrt GCC 11.1.0 r16904-a4e2766a5b) ) #3310 SMP Wed Jul 20 04:33:37 +07 2022
Previous/Reset: r49492/No
Mode/Status: Gateway/Router/AP/wlan0, 0.1 & 0.2 & 0.3/ wlan1, 1.1, & 1.2/ Samba via eSATA 4TB/ VLAN Split 2‐br0 & 2‐br1/ Print USB2/ VPN Client Config / Wireguard Config w/Proton
Issues/Errors: none so far

[Zyxx]

Router/Version: Linksys WRT1900ACS v2
File: ddwrt-linksys-wrt1900acsv2-webflash.bin
Firmware: DD-WRT v3.0-r49531 std (07/20/22) (prev. DD-WRT v3.0-r49492 std (07/14/22))
Kernel: Linux 4.9.323 #3310 SMP Wed Jul 20 04:33:37 +07 2022 armv7l
Mode: Gateway, SFE enabled, Wifi disabled, Wireguard for external access, WAN to DSL, samba to access USB3-ext4 SSD, Keep Alive reboot 5:00 in the morning
Reset: No
Status: Installed yesterday, ok. Load average 0.00, 0.00, 0.00, Temperatures CPU 78.9 °C / WL0 52.5 °C / WL1 54.1 °C

[oliver44]

Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r49531 std (07/20/22)
Kernel Version Linux 4.9.323 #3310 SMP Wed Jul 20 04:33:37 +07 2022 armv7l
Uptime 2:25
Load Average 1% 0.01, 0.00, 0.00
Temperatures CPU 57.5 °C / WL0 32.1 °C / WL1 33.3 °C

update- browser-waterfox,I switched directly from the first partition from the original software Linksys,
connection Type PPPoE - IPv6 Type DHCPv6 with Prefix Delegation- DHCPv6 Server Daemon Enable Daemon, Router Advertisement Daemon (radvd)Enable Daemon,
Theme - Dracula
Schedule Reboot-on,
Web Access Protocol - HTTPS,
Port Forwarding ok,

adblock - 1.Go to Administration -> Go to Administration -> Commands. paste it in “Run Startup”

wget -qO /tmp/mvps http://winhelp2002.mvps.org/hosts.txt
curl -k https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts https://raw.githubusercontent.com/jerryn70/GoodbyeAds/master/Hosts/GoodbyeAds.txt "^0.0.0.0" >> /tmp/mvps
killall -HUP dnsmasq
stopservice dnsmasq && startservice dnsmasq

2.then in the Additional Dnsmasq options add this: addn-hosts=/tmp/mvps 3.Schedule Reboot tuesday 4.reboot router

Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36,Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N/G, Width VHT 40 Mhz-Wireless Channel-6, Extension Channel Lower,Short Preamble, Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok

Reset:No- just reboot
Issues/Errors-For the first time this year when I encounter problems during configuration, the apply and save buttons were inactive, only after about 10 seconds since I tried to use them they became active!
I noticed that I lost ipv6 not even a day after installation, I had to reboot the router to solve both problems, today I activated to save the system logs, if problems occur I return with the system logs, so far everything seems ok!