Posted: Wed Jun 29, 2022 4:47 Post subject: New Build - 06/29/2022 - r49392
Welcome to Atheros r49392 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49392 std (06/29/22)
Kernel Version Linux 4.9.319 #635 SMP Fri Jun 17 15:05:12 +07 2022 armv7l
Current Time Wed, 29 Jun 2022 00:12:30
Uptime 1 min
GUI over 49361
Reset: no
Issues: none
Joined: 16 Nov 2015 Posts: 6446 Location: UK, London, just across the river..
Posted: Wed Jun 29, 2022 7:04 Post subject:
Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r49392 std (06/29/22)
Kernel Version Linux 3.18.140-d6 #147301 Wed Jun 29 07:38:59 +07 2022 mips
Router Model Netgear R7800
Firmware Version DD-WRT v3.0-r49392 std (06/29/22)
Linux 4.9.319 #1048 SMP Wed Jun 29 03:17:35 +07 2022 armv7l
Router Model TP-Link TL-WR740N
Firmware Version DD-WRT v3.0-r49392 std (06/29/22)
Kernel Version Linux 3.10.108-d11 #111602 Wed Jun 29 06:48:42 +07 2022 mips
Router Model Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r49392 std (06/29/22)
Kernel Version Linux 4.9.319 #635 SMP Fri Jun 17 15:05:12 +07 2022 armv7l
update: CLI
reset: NO
mode: Gateway
status: Operational 6h+
errors: Nothing new, yet...cannot do much testing, but so far so good, all units are operational... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Last edited by Alozaros on Wed Jun 29, 2022 12:45; edited 2 times in total
Linksys EA8500...main gateway
DD-WRT v3.0-r49392 std (06/29/22)
Linux 4.9.319 #1046 SMP Sun Jun 26 05:08:17 +07 2022 armv7l
GUI install over r49360
all good
up 4:04
#
other EA8500
GUI install over r49361
all good
up 4:09
#
Netgear WNDR3700 V4
DD-WRT v3.0-r49392 std (06/29/22)
Linux 3.18.140-d6 #147329 Wed Jun 29 08:37:48 +07 2022 mips
scp 'firmware.bin' install over r49361
all good
up 4:06
Router Model: TP-Link TL-WR1043ND
Firmware Version: DD-WRT v3.0-r49392 std (06/29/22)
Previous: DD-WRT v3.0-r49361 std (06/26/22)
Kernel Version: Linux 3.10.108-d11 #111590 Wed Jun 29 06:36:36 +07 2022 mips
Mode: Gateway/AP
Reset: No
Status: OK
Uptime: ~45m-1h
Issues/Errors: See attachments.
Speedtest.net Results: Wired 51.83 D 9.98 U / Wireless 13.57 D 9.86 U (vintage Ath5k in x86_32 MacBook ~2008 model)
Flash went through via webUI on Firefox ESR on Debian 10 Mate without a hitch. Will continue testing functionality of features and report back should any issues arise. _________________ "The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost
"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio
Linksys EA8500 ...backup gateway
DD-WRT v3.0-r49392 std (06/29/22)
Linux 4.9.319 #1046 SMP Sun Jun 26 05:08:17 +07 2022 armv7l DD-WRT
GUI install over R49361 no reset
Good for Gateway AP, 2.4Ghz, 5Ghz, Samba, MAC Clone.
up 5h:40m
Joined: 08 Apr 2017 Posts: 49 Location: Underground lair
Posted: Sat Jul 02, 2022 17:22 Post subject:
Router/Version: TP Link Archer A7 / v5 File/Kernel: DD-WRT v3.0-r49392 std / Linux 3.18.140-d6 #147313 Previous/Reset: Stock / No Mode/Status: Station Bridge / Stable Issues/Errors: No issues. Web GUI install. First initial flash, then std flash. Very smooth. All features I typically use work correctly. Very pleased. _________________ Routers: Netgear R8000, Linksys E1200v1, E4200, WRT54Gv3, TL-WDR4300v1.7
I guess I'm the only one with issues - perhaps I've got a failing device.
In any case, I decided to reset to defaults (using the GUI option) and reconfigured without any improvement. I've now reset using the erase nvram command via SSH and reconfigured.
Things started working well, but I was still having issues on the 5GHz band - traffic simply wasn't routing correctly on it (could connect, but no internet access). 2.4GHz was fine.
Eventually the device appears to become overloaded where everything just stops (even traffic on the wired switch is hung/lost).
I've rolled back to 05-27-2022-r48972 which seems stable for now - everything after this seems to give me issues after the reset.
Now, I've also changed/upgraded my network recently (updated connection from ISP with new Modem/Gateway), but it was working fine until I tried this update. I also introduced IPTV hardware which could be increasing the amount of traffic on my network and overwhelming the unit.?
Router/Version: Linksys EA8500 / Box Rev. A00 PCB REV:205(XC) hw_rev=1 hw_ver=XB / r49392 (06/29/22)
File/Kernel: CLI Flash dd-wrt-webupgrade.bin / Linux 4.9.319 #1046 SMP Sun Jun 26 05:08:17 +07 2022 armv7l
Previous/Reset: r49361 (06/26/22) / No (all stable more than a few days r49268 r49289 r49326 r49361 r49392)
Mode/Status: AP Gateway / VaNiLLa Mixed 20 MHz Ch 1 & 149 TX Power 30 dBm Short Preamble, ttraff disabled
Issues/Errors: No issues with r49392 up 4 days 8:30, of course both radios still functional & ATF always enabled.