Posted: Wed Jun 29, 2022 4:47 Post subject: New Build - 06/29/2022 - r49392
Welcome to Broadcom r49392 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Netgear R8500
Firmware Version DD-WRT v3.0-r49392 std (06/29/22)
Kernel Version Linux 4.4.302-st14 #6580 SMP Wed Jun 29 04:57:48 +07 2022 armv7l
Current Time Wed, 29 Jun 2022 00:43:40
Uptime 0 min
GUI over 49361
Reset: no
Issues: none
Joined: 16 Nov 2015 Posts: 6437 Location: UK, London, just across the river..
Posted: Wed Jun 29, 2022 12:52 Post subject:
Router Model Netgear R7000
Firmware Version DD-WRT v3.0-r49361 std (06/26/22)
Kernel Version Linux 4.4.302-st14 #6557 SMP Sat Jun 25 16:35:01 +07 2022 armv7l
update: CLI
reset: NO
mode: Gateway
status: Operational 6h+
errors: Nothing new, yet... _________________ Atheros
TP-Link WR740Nv1 ---DD-WRT 55630 WAP
TP-Link WR1043NDv2 -DD-WRT 55723 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear XR500 --DD-WRT 55779 Gateway/DoH,Forced DNS,AP Isolation,4VLAN,Ad-Block,Firewall,Vanilla
Netgear R7800 --DD-WRT 55819 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 55779 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 55460 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913
Posted: Thu Jun 30, 2022 21:32 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r49392 std (06/29/22) Kernel: Linux 4.4.302-st14 #6574 SMP Wed Jun 29 04:14:20 +07 2022 armv7l Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope. Previous: 06-19-2022-r49268 Status: Working really, really well so far; still testing. Temperatures: CPU 68.6 °C / WL0 54.5 °C / WL1 55.9 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest.jpg
Description:
Speedtest Over 5.8GHz Wireless.
Filesize:
64.72 KB
Viewed:
3839 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Router/Version: r7000
File/Kernel: Firmware: DD-WRT v3.0-r49392 std (06/29/22)
Previous/Reset: Reset Yes
Mode/Status: Gateway with both Wifi On
Issues/Errors: No perceived issues but serial with Wifi ON outputs the following 'Bad Address' messages (with both WiFi turned off, no such messages):
Code:
eth1: Bad address
[13020.278928] br0: received packet on eth2 with own address as source address
eth1: Bad address
[13220.818968] br0: received packet on eth2 with own address as source address
eth1: Bad address
eth2: Bad address
[13389.039886] br0: received packet on eth2 with own address as source address
eth1: Bad address
[13445.085107] br0: received packet on eth2 with own address as source address
eth1: Bad address
Router/Version: Asus RT-N66U
File: dd-wrt.v24-49392_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r49392 big (06/29/22) (prev. DD-WRT v3.0-r49361 big (06/26/22))
Kernel: Linux 4.4.302-st14 #17168 Wed Jun 29 05:43:26 +07 2022 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: installed at release, ok.
Firmware: v3.0-r49392 std (06/29/22)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302-st14 #6574 SMP Wed Jun 29 04:14:20 +07 2022 armv7l
Previous: v3.0-r49361 std (06/26/22)
Mode/Status: AP wired and wireless / Up and running for 2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.6 °C / WL1 51.7 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7