Posted: Sun Jun 26, 2022 9:53 Post subject: New Build - 06/26/2022 - r49361
Welcome to Broadcom r49361 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Posted: Sun Jun 26, 2022 15:18 Post subject: 49361
Netgear R8500
Firmware Version DD-WRT v3.0-r49361 std (06/26/22)
Kernel Version Linux 4.4.302-st14 #6563 SMP Sun Jun 26 08:59:49 +07 2022 armv7l
Current Time Sun, 26 Jun 2022 09:12:48
Uptime 1 min
GUI over 49326
Reset: no
Issues: none
Firmware: v3.0-r49361 std (06/26/22)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302-st14 #6557 SMP Sat Jun 25 16:35:01 +07 2022 armv7l
Previous: v3.0-r49268 std (06/19/22)
Mode/Status: AP wired and wireless / Up and running for 1 day
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.8 °C / WL1 51.8 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r49361 std (06/26/22)
Kernel Version: Linux 4.4.302-st14 #6557 SMP Sat Jun 25 16:35:01 +07 2022 armv7l
Temperatures: CPU 72.5 °C / WL1 56.0 °C
Current Time: Mon, 27 Jun 2022 17:18:31
Uptime: 1 day, 7:41
Reset: No
GUI install over 49268
Installed using Brave browser over wireless
No issues
Thank you BS and thanks you gurus for your guides and wisdom _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Router/Version: Asus RT-N66U
File: dd-wrt.v24-49361_NEWD-2_K3.x-big-RT-N66U.trx
Firmware: DD-WRT v3.0-r49361 big (06/26/22) (prev. DD-WRT v3.0-r49139 big (06/10/22))
Kernel: Linux 4.4.302-st14 #17132 Sun Jun 26 09:44:48 +07 2022 mips
Mode: Gateway, SFE disabled, Wifi disabled, WAN disabled, Wireguard Endpoint for external VPS, connected via LAN to WRT1900ACS v2, Keep Alive reboot 6:05 in the morning
Reset: No
Status: installed yesterday, ok.