How bypass Tenda configuration import check

Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions
Goto page Previous  1, 2, 3
Author Message
mrocha2
DD-WRT Novice


Joined: 11 Jun 2022
Posts: 19

PostPosted: Sat Jun 25, 2022 17:47    Post subject: Reply with quote
The screenshot is to help me find the Host Name setting? If is it, I'm sure, don't have, I'm know this is a very common and basic setting, but this one don't have on Web UI, I know this is a shame, but I'm sure, this is why I want to edit this setting on exported config and re-import it.
Sponsor
mrocha2
DD-WRT Novice


Joined: 11 Jun 2022
Posts: 19

PostPosted: Sat Jun 25, 2022 18:00    Post subject: Reply with quote
https://down.tendacn.com/uploadfile/F3/F3V2.0%20User%20%20Guide.zip

My Web UI is exactly as in this manual, on page 52, you can see the available WAN settings,
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1899

PostPosted: Sat Jun 25, 2022 18:19    Post subject: Reply with quote
Under Administration - > Server Name, you can set that to manual and that should be the hostname. It doesn't cover it in the user guide, but I stepped through the simulator on the vendor's website. It's for the V3, but I doubt they changed the webUI that much. Only one way to find out!

https://ibb.co/xH0rMQ2


There is also a WISP mode covered on the vendor's website. If there is an nvram variable in the config file, there is a place in the webUI to change it on stock firmware most of the time.

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
mrocha2
DD-WRT Novice


Joined: 11 Jun 2022
Posts: 19

PostPosted: Sat Jun 25, 2022 19:24    Post subject: Reply with quote
Quote:
I doubt they changed the webUI that much.


They changed! My router UI is EXACTLY like on pdf of version 2 of the link I posted, don't have Server Name or Service Name, I'm sure, I searched for this setting in all Web UI pages, don't have on Web UI, sorry, I'm not specialist on routers or flashing routers, but I'm not quite ignorant, I know a little bit, :D if it was easy as open the Web UI and set it, why I should be here 3 weeks trying some help? :D
dale_gribble39
DD-WRT Guru


Joined: 11 Jun 2022
Posts: 1899

PostPosted: Sat Jun 25, 2022 20:32    Post subject: Reply with quote
Well, if yours is the V2.0 (F3-16), it's a RealTek SoC, and it looks like figuring out the serial UART connection to do anything would be fun.

https://fccid.io/V7TF3-16/Internal-Photos/09-F3-IntPho-3332670

I cannot find a firmware image for this specific router anywhere on the internet, so there's only two options: Figure out how to manipulate that @ number sequence for necessary changes, or figure out how to connect serial console and crack into it. Without device in hand, this is where my "help" ends. Happy Hunting; Good luck.

_________________
"The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep." - Robert Frost

"I am one of the noticeable ones - notice me" - Dale Frances McKenzie Bozzio

<fact>code knows no gender</fact>

This is me, knowing I've ruffled your feathers, and not giving a ****
Some people are still hard-headed.

--------------------------------------
Mac Pro (Mid 2012) - Two 2.4GHz 6-Core Intel Xeon E5645 processors 64GB 1333MHz DDR3 ECC SDRAM OpenSUSE Leap 15.5
mrocha2
DD-WRT Novice


Joined: 11 Jun 2022
Posts: 19

PostPosted: Sat Jun 25, 2022 20:55    Post subject: Reply with quote
:( thanks
Goto page Previous  1, 2, 3 Display posts from previous:    Page 3 of 3
Post new topic   Reply to topic    DD-WRT Forum Index -> General Questions All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum