Posted: Thu Jun 16, 2022 5:46 Post subject: New Build - 06/16/2022 - r49212
Welcome to Broadcom r49212 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r49212 std (06/16/22)
Kernel Version: Linux 4.4.302-st14 #6436 SMP Thu Jun 16 05:36:06 +07 2022 armv7l
Temperatures: CPU 70.8 °C / WL1 55.5 °C
Current Time: Thu, 16 Jun 2022 17:30:50
Uptime: 6 min
Reset: No
GUI install over 49139
Installed using Brave browser over wireless
No issues
Thank you BS and thanks you gurus for your guides and wisdom _________________ Netgear XR500 - Gateway
R6700 v3 - Station Bridge
Posted: Fri Jun 17, 2022 12:39 Post subject: Samba incorect size
Router NetGear R7000
partition ext2 - shows total size i terabytes but hdd is only 512 Gig.
DD-Wrt in USB Support shows correclty
But from windows 10 or 11 or Adroid I see strange big digits
Lasted vesrion with showing correcty was r48567 dated 2022.03.023
Router TP-Link ARCHER-A7 v5
DD-WRT v3.0-r49212 std (06/16/22)
Linux 3.18.140-d6 #146050 Thu Jun 16 09:13:05 +07 2022 mips
On DD-WRT in USB Support shows:
Block device, size 57.28 GiB (61505273856 bytes)
Partition 2: 554 MiB Type 0x83 (Linux)
Partition 1: 56.74 GiB Type 0x07 exFAT file system
From windows 10 and from windows 11 I see strange numbers:
[Data] 5 104 920 952 832 free from 7 797 781 561 344 bytes
Thank for your hard work - and sorry for my english
Router Model/Version: Asus RT-AC66U B1
File: asus_rt-ac68u-firmware.trx
Firmware: DD-WRT v3.0-r49212 std (06/16/22)
Kernel: Linux 4.4.302-st14 #6436 SMP Thu Jun 16 05:36:06 +07 2022 armv7l
Current Time: Sat, 18 Jun 2022 13:07:28
Temperatures: CPU 52.5 °C / WL0 43.0 °C / WL1 41.5 °C
Previous: DD-WRT v3.0-r49139 std (06/10/22)
Reset: Yes
Mode: Gateway/VAP/AP
Uptime: 32 Min
Status: OK
Issues: Somehow I can't select a dedicated channel on AC/N Mixed on 5Ghz band...did I miss something?