blkt DD-WRT Guru
Joined: 20 Jan 2019 Posts: 5700
|
Posted: Wed Jun 22, 2022 12:37 Post subject: New Build - 06/22/2022 - r49289 |
|
Welcome to Broadcom r49289 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Downloads: HTTPS, FTP
CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.
Trac SVN: repository since last build r49268 (mirror)
• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!
Notes:
• Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • Archer C8 v2, v3, R6200 support.
• mDNS/Avahi SmartDNS FreeRADIUS htop SNMP OpenSSL NTFS-3G Unbound irqbalance Tor ZFS mac80211 DoT Redirection
• In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
• Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUI but v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at boot are fixed, both unbridged (r40634) and bridged (r47822). Please test, remove startup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missing via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Example Template: Code: | [b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b] |
|
|
egc DD-WRT Guru
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
|
Posted: Wed Jun 22, 2022 12:53 Post subject: |
|
Router Model: Linksys EA6900 (XVortex CFE)
Firmware Version: DD-WRT v3.0-r49289M Community Build (06/22/22)
Kernel Version: Linux 4.4.302-st14 #1 SMP Wed Jun 22 08:26:17 CEST 2022 armv7l
Upgraded: DD-WRT v3.0-r49113M Community Build (06/07/22) via telnet (update via GUI not possible because nvram is placed on linux partition and not linux2 partition due to Xvortex CFE)
Reset: Yes, before and after (Erase NVRAM and WPS reset), No not this time.
Configuration: AP, DHCP server, 2,4GHz wireless running with unbridged VAP, 5GHz running, some static leases and some port range forwarding.
Wireguard client running with PBR.
OpenVPN client with PBR running.
CTF+FA enabled
NVRAM size 44K (NVRAM size should not be a problem with the Xvortex CFE)
Status: Up and stable for 4 hours
Errors: none so far
Thanks BS!! _________________ Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087 |
|