New Build - 05/23/2022 - r48954

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Mon May 23, 2022 7:50    Post subject: New Build - 05/23/2022 - r48954 Reply with quote
Welcome to Marvell r48954 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48897 (mirror)

OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• WRT1200AC, WRT1200AC V2, WRT1900AC, WRT1900AC V2, WRT1900ACS, WRT1900ACS V2, WRT3200ACM and WRT32X.
mDNS/Avahi ZFS dnscrypt bootfail PHP mdadm Tor DoT Redirect SmartDNS freeradius htop rtw88 mt76 ath10k ath5k snmp
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Mon May 23, 2022 16:21    Post subject: Reply with quote
Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r48954 (05/23/22)
Kernel Version Linux 4.9.314 #3223 SMP Mon May 23 03:28:06 +07 2022 armv7l
Current Time Mon, 23 May 2022 19:15:09
Uptime 28 min

update- browser-waterfox,I switched directly from the first partition from the original software,

connection Type PPPoE-IPv6 Type DHCPv6 with Prefix Delegation-,No release on reconnect-on, Schedule Reboot- All ok

Encrypt DNS-ok

Port Forwarding ok

adblock- ok https://github.com/AnielShri/ddwrt-adblocker#startup-code

Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36-Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N/G, Width VHT 40 Mhz-Wireless Channel-6, Extension Channel Lower,Short Preamble, Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results


Last edited by oliver44 on Mon May 23, 2022 18:04; edited 1 time in total
seb666
DD-WRT Novice


Joined: 01 Mar 2017
Posts: 33

PostPosted: Mon May 23, 2022 17:08    Post subject: Reply with quote
Hi,

with the last few releases, I'm seeing issues with the 2.4 GHz network.
I was running on r48810 for a few weeks and it worked great, but I had trouble upgrading to anything beyond (tested r48897 and r48954).

I have an old 802.11g device that and did not connect anymore with the newer releases.
This is what I see in the logs:
Quote:

May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d MLME: auth request, signal -26 (Accepted)
May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d IEEE 802.11: authenticated
May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d MLME: assoc request, signal -24 (Accepted)
May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d IEEE 802.11: associated (aid 4)
May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d RADIUS: starting accounting session 24F6BE2FCFE7F35F
May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: pairwise key handshake completed (RSN)
May 23 18:35:28 linksys daemon.info dnsmasq-dhcp[1430]: DHCPDISCOVER(br0) 00:1a:6b:a8:4a:2d
May 23 18:35:28 linksys daemon.info dnsmasq-dhcp[1430]: DHCPOFFER(br0) 192.168.10.25 00:1a:6b:a8:4a:2d
May 23 18:35:28 linksys daemon.info dnsmasq-dhcp[1430]: DHCPREQUEST(br0) 192.168.10.25 00:1a:6b:a8:4a:2d
May 23 18:35:28 linksys daemon.info dnsmasq-dhcp[1430]: DHCPACK(br0) 192.168.10.25 00:1a:6b:a8:4a:2d pronto2
May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key Error Request (STA detected Michael MIC failure (group=1))
May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: ignore Michael MIC failure report since group cipher is not TKIP
May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d RADIUS: starting accounting session 24F6BE2FCFE7F35F
May 23 18:35:28 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: pairwise key handshake completed (RSN)
May 23 18:35:29 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key Error Request (STA detected Michael MIC failure (group=1))
May 23 18:35:29 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: ignore Michael MIC failure report since group cipher is not TKIP
May 23 18:35:29 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:29 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:30 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:31 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:32 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:32 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:32 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:32 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:32 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:32 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d WPA: received EAPOL-Key request with invalid MIC
May 23 18:35:38 linksys daemon.info hostapd: wlan1: STA 00:1a:6b:a8:4a:2d IEEE 802.11: deauthenticated due to local deauth request


When preparing some logs for this post and going back/forth between these releases I noticed that this also does happen with the r48810 release.
But I seem to be able to fix the issue by going to the wireless security settings page and hitting "Apply", which apparently reloads some of the wifi stuff.
I was checking if the "Disable EAPOL Key Retries" option would make any difference but it doesn't matter if it's enabled or disabled.

It looks to me as if there's some difference in the way the (2.4G) wifi is setup between the initial state after rebooting and after hitting the Apply button in the security settings.

Sebastian
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Mon May 23, 2022 17:12    Post subject: Reply with quote
You can't mix and match WPA2 and WPA3 on Marvell (this has been discussed in the forum already), especially with BG-Mixed (why you're using that setting, no idea... should be NG-Mixed or Mixed). Pick the security algorithm/method that works across the board.
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
seb666
DD-WRT Novice


Joined: 01 Mar 2017
Posts: 33

PostPosted: Mon May 23, 2022 17:16    Post subject: Reply with quote
But I'm using these settings for ages without any problems until now.
It also seems to work fine now after reapplying the security settings, even with the r48954 release.
Are you sure that this is the issue?

Sebastian

EDIT: no, it's not the issue. I disabled WPA3 and rebooted the router.
Same errors as before - the device does not connect.
I enabled WPA3 additionally as before and only hit apply - works.
(Of course the client device does not know anything about WPA3, I'm glad it even can do WPA2)

EDIT2: I was using BG-Mixed because I had issues running NG-mixed in the past.
I changed it to "G only" now, which seems to work fine at the moment.
It also looks like this solved the initial issue - I have power-cycled the router and also rebooted it from the command line and each time my problematic device was able to connect just fine afterwards.
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 266

PostPosted: Mon May 23, 2022 18:26    Post subject: Reply with quote
Linksys WRT1900ACS
DD-WRT v3.0-r48954 std (05/23/22)
Linux 4.9.314 #3223 SMP Mon May 23 03:28:06 +07 2022 armv7l

Work stable with unbound
Upgrade from r48897 via CLI without reset

adblock- ok https://github.com/AnielShri/ddwrt-adblocker#startup-code seems error ?

Here is my case which verified.
Code:

sleep 20
echo '#!/bin/sh'
logger Starting blockads scripts
rm /tmp/oisd_nsfw /tmp/oisd_full
curl -sS -L --compressed "https://dnsmasq.oisd.nl/nsfw/" |sed '/address=/!d' > /tmp/oisd_nsfw
curl -sS -L --compressed "https://dnsmasq.oisd.nl/" |sed '/address=/!d' > /tmp/oisd_full
killall dnsmasq
grep "conf-file=/tmp/oisd_nsfw" /tmp/dnsmasq.conf || echo "conf-file=/tmp/oisd_nsfw" >> /tmp/dnsmasq.conf;
grep "conf-file=/tmp/oisd_full" /tmp/dnsmasq.conf || echo "conf-file=/tmp/oisd_full" >> /tmp/dnsmasq.conf;
dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
logger Finished executing blockads script' >> /tmp/custom.sh;
chmod +x /tmp/custom.sh
/tmp/custom.sh
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14125
Location: Texas, USA

PostPosted: Mon May 23, 2022 18:48    Post subject: Reply with quote
@seb666:

Keep in mind, the following links may contain misinformation - if WPA2/3 conjoined was *not* tested strictly on Marvell, any 'success' shown is likely moot. This area of the forum has a long history of *misinformation* and I gave up trying to correct any of it because people love their freedom of speech and to have many threads about similar topics because they're too lazy to search the forum or internet. That being said, happy reading.

WPA2 Personal/WPA3 Personal/SAE - both enabled now
Linksys ACM3200 Wifi problem
[SOLVED] WRT1900ACSV2 wifi clients isolated after reboot
WPA3-Enterprise reported as WPA2?
WRT32X - WPA2/3 and Security based issues
Nest Thermostat Issues
Linksys WRT1900ACS V2 - New wireless security ?
WPA3 Personal !!!


(not necessarily relevant):

iOS Devices Dropping Wireless Internet
WRT3200ACM and WPA3
Lost connection with iphone
iOS devices unable to connect to WiFi with security
Stable 5Ghz for WRT1200AC V2
Issues with WPA2/WPA3 with Android 11 on WRT32x?
WRT1900AC V1 - DDWRT Slow Speed Wifi And Unstable
Message to brainslayer - issue #6319 [WRT3200ACM] FIXED

_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
seb666
DD-WRT Novice


Joined: 01 Mar 2017
Posts: 33

PostPosted: Mon May 23, 2022 19:43    Post subject: Reply with quote
Thanks for the reading material!
I don't want to hijack this thread, so I'll only say that I have had enabled WPA2+3 personal for ages and never ran into any issues related to this.
Not all my devices support WPA3, so I cannot turn off WPA2.

I did have "the" issue with Apple devices losing connectivity in post-r44048 releases that was fixed last(?) year, but I don't think that was related to the security settings (I also don't remember if WPA3 was available in that release).
From the links you provided, I gather that simultaneously activating WPA2+3 can cause issues though, so I'll keep that in mind.

Quick question on the side: is there a way to see which connected clients use WPA2 and which are using WPA3?

Sebastian
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Mon May 23, 2022 20:16    Post subject: Reply with quote
saphirely wrote:
Linksys WRT1900ACS
DD-WRT v3.0-r48954 std (05/23/22)
Linux 4.9.314 #3223 SMP Mon May 23 03:28:06 +07 2022 armv7l

Work stable with unbound
Upgrade from r48897 via CLI without reset

adblock- ok https://github.com/AnielShri/ddwrt-adblocker#startup-code seems error ?

Here is my case which verified.
Code:

sleep 20
echo '#!/bin/sh'
logger Starting blockads scripts
rm /tmp/oisd_nsfw /tmp/oisd_full
curl -sS -L --compressed "https://dnsmasq.oisd.nl/nsfw/" |sed '/address=/!d' > /tmp/oisd_nsfw
curl -sS -L --compressed "https://dnsmasq.oisd.nl/" |sed '/address=/!d' > /tmp/oisd_full
killall dnsmasq
grep "conf-file=/tmp/oisd_nsfw" /tmp/dnsmasq.conf || echo "conf-file=/tmp/oisd_nsfw" >> /tmp/dnsmasq.conf;
grep "conf-file=/tmp/oisd_full" /tmp/dnsmasq.conf || echo "conf-file=/tmp/oisd_full" >> /tmp/dnsmasq.conf;
dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
logger Finished executing blockads script' >> /tmp/custom.sh;
chmod +x /tmp/custom.sh
/tmp/custom.sh



Thanks for the suggestion, I'll try your script too!

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results


Last edited by oliver44 on Sat May 28, 2022 10:46; edited 1 time in total
jwieland
DD-WRT User


Joined: 31 May 2018
Posts: 72

PostPosted: Mon May 23, 2022 22:46    Post subject: Reply with quote
Router/Version: Linksys WRT1200acV2
File/Kernel: 4.9.314
Previous/Reset: 48897/no
Mode/Status: A/P operational
Issues/Errors: None

_________________
Netgear R9000
Netgear R7800 (spare)
Linksys WRT1200ac v2 (spare)
Fritzbuf
DD-WRT User


Joined: 22 Feb 2014
Posts: 156
Location: Germany

PostPosted: Tue May 24, 2022 10:17    Post subject: Reply with quote
WRT3200ACM
update from r48886
no reset
no error

- update works good without any problems
- VPN WireGuard
- USB
- DDNS
- CRON "delete directories older > x Days, created by 3xWebCams (stored on128GB SSD)"
- Port Forwarding
- FTP
- Samba
- WLAN offline, I use UniFi AP AC LITE as access Point!
- Lan


all OK without error, Thank You for the good work !!!!

best regards
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Tue Jun 21, 2022 20:18    Post subject: Reply with quote
saphirely wrote:
Linksys WRT1900ACS
DD-WRT v3.0-r48954 std (05/23/22)
Linux 4.9.314 #3223 SMP Mon May 23 03:28:06 +07 2022 armv7l

Work stable with unbound
Upgrade from r48897 via CLI without reset

adblock- ok https://github.com/AnielShri/ddwrt-adblocker#startup-code seems error ?

Here is my case which verified.
Code:

sleep 20
echo '#!/bin/sh'
logger Starting blockads scripts
rm /tmp/oisd_nsfw /tmp/oisd_full
curl -sS -L --compressed "https://dnsmasq.oisd.nl/nsfw/" |sed '/address=/!d' > /tmp/oisd_nsfw
curl -sS -L --compressed "https://dnsmasq.oisd.nl/" |sed '/address=/!d' > /tmp/oisd_full
killall dnsmasq
grep "conf-file=/tmp/oisd_nsfw" /tmp/dnsmasq.conf || echo "conf-file=/tmp/oisd_nsfw" >> /tmp/dnsmasq.conf;
grep "conf-file=/tmp/oisd_full" /tmp/dnsmasq.conf || echo "conf-file=/tmp/oisd_full" >> /tmp/dnsmasq.conf;
dnsmasq -u root -g root --conf-file=/tmp/dnsmasq.conf
logger Finished executing blockads script' >> /tmp/custom.sh;
chmod +x /tmp/custom.sh
/tmp/custom.sh


To use this script what settings I need to make, just replace the script in this tutorial https://github.com/AnielShri/ddwrt-adblocker#startup-code and use the same settings?

I replaced the script and tried Telnet into the router and check if /tmp/custom.sh and not exists after reboot!

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum