DD-WRT :: View topic - New Build - 06/14/2022

New Build - 06/14/2022 - r49197

DD-WRT Forum Index -> Atheros WiSOC based Hardware

Goto page 1, 2 Next

View previous topic :: View next topic

Author

Message

blkt
DD-WRT Guru

Joined: 20 Jan 2019
Posts: 5550

Posted: Tue Jun 14, 2022 8:09 Post subject: New Build - 06/14/2022 - r49197

Welcome to Atheros r49197 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r49139 (mirror)

• OpenVPN 2.5.7: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc !

Notes:
• Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
• mDNS/Avahi DoT Redirect SmartDNS freeradius htop rtw88 mt76 ath10k ath5k SNMP OpenSSL ntfs-3g Unbound irqbalance
• In-kernel Samba (ksmbd 3.4.4 ++++): guest behavior selectable. • WSD up date • ANTFS/NTFS3 kernel mode driver ++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
• Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

Code:

[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

Sponsor

matjazk
DD-WRT User

Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

Posted: Tue Jun 14, 2022 8:45 Post subject:

Router Model: Netgear Nighthawk X10
Firmware Version: DD-WRT v3.0-r49197 std (06/14/22)
Kernel Version: Linux 4.9.317 #633 SMP Tue Jun 7 01:22:36 +07 2022 armv7l

Stil the same predictable httpd crash in wireless tab (basic settings). The page doesn't fully load, missing buttons. It was the same in at least two releases (49113, 49139). Also the same with defaults (nvram erase && reboot).

Log excerpt:

Code:

Jun 14 10:28:28 my_router user.err : Caught SIGSEGV (11) in ???
Jun 14 10:28:28 my_router user.err : Fault at memory location 0x00000008 due to address not mapped to object (1).
Jun 14 10:28:28 my_router user.err : Postinfo: <script type="text/javascript"> //<![CDATA[ document.write("<input class=\"button\" type=\"button\" value=\"" + wl_b
Jun 14 10:28:28 my_router user.err : Postinfo: </div><br />
Jun 14 10:28:28 my_router user.err : Postinfo: <h2><script type="text/javascript">Capture(wl_basic.h2_v24)</script> %s%s</h2>
Jun 14 10:28:28 my_router user.err : Postinfo: <fieldset>
Jun 14 10:28:28 my_router user.err : Postinfo: <legend><script type="text/javascript">Capture(share.pintrface)</script> %s - SSID [
Jun 14 10:28:28 my_router user.err : Postinfo: my_router
Jun 14 10:28:28 my_router user.err : Postinfo: ] HWAddr [%s]</legend>
Jun 14 10:28:28 my_router user.err : Postinfo: <div class="setting"><div class="label"><script type="text/javascript">Capture(wl_basic.label)</script></div><select Postinfo: <script type="text/javascript"> //<![CDATA[
Jun 14 10:28:28 my_router user.err : Postinfo: document.write("<option value=\"ap\" %s >" + wl_basic.ap + "</option>");
Jun 14 10:28:28 my_router user.err : Postinfo: document.write("<option value=\"sta\" %s >" + wl_basic.client + "</option>");
Jun 14 10:28:28 my_router user.err : Postinfo: document.write("<option value=\"wet\" %s >" + wl_basic.clientRelayd + "</option>");
Jun 14 10:28:28 my_router user.err : Postinfo: //]]> </script>
Jun 14 10:28:28 my_router user.err : Postinfo: </select>
Jun 14 10:28:28 my_router user.err : Postinfo: </div>
Jun 14 10:28:28 my_router user.err : Postinfo: <div class="setting">
Jun 14 10:28:28 my_router user.err : Postinfo: <div class="label"><script type="text/javascript">Capture(wl_basic.label2)</script></div>
Jun 14 10:28:28 my_router user.err : Postinfo: <select name="%s">
Jun 14 10:28:28 my_router user.err : Postinfo: <script type="text/javascript"> //<![CDATA[
Jun 14 10:28:28 my_router user.err : Postinfo: document.write("<option value=\"disabled\" %s>" + share.disabled + "</option>");
Jun 14 10:28:28 my_router user.err : Postinfo: document.write("<option value=\"ad-only\" %s>" + wl_basic.ad + "</option>");
Jun 14 10:28:28 my_router user.err : Postinfo: //]]> </script>
Jun 14 10:28:28 my_router user.err : Postinfo: </select>
Jun 14 10:28:28 my_router user.err : Postinfo: </div>
Jun 14 10:28:28 my_router user.err : Postinfo: <div class="setting">
Jun 14 10:28:28 my_router user.err : Postinfo: <div class="label"><script type="text/javascript">Capture(wl_basic.label4)</script></div>
Jun 14 10:28:28 my_router user.err : Postinfo: <select name="%s" rel="wlan9k" onfocus="check_action(this,0)" onchange="setChannelProperties(this);"><script type="tePostinfo: document.write("<option value=\"0\" %s>" + share.auto + "</option>");
Jun 14 10:28:28 my_router user.err : Postinfo: document.write("<option value=\"%s\" rel=\'{\"lll\":%d,\"llu\":%d,\"lul\":%d,\"luu\":%d,\"ull\":%d,\"ulu\":%d,\"uul\"Postinfo: document.write("<option value=\"%s\" rel=\'{\"lll\":%d,\"llu\":%d,\"lul\":%d,\"luu\":%d,\"ull\":%d,\"ulu\":%d,\"
Jun 14 10:28:28 my_router user.err : Thread 3418: httpd
Jun 14 10:28:28 my_router user.err : maps:
Jun 14 10:28:28 my_router user.err : 00010000-0008e000 r-xp 00000000 1f:05 2191 /usr/sbin/httpd
Jun 14 10:28:28 my_router user.err : 0009d000-0009e000 r--p 0007d000 1f:05 2191 /usr/sbin/httpd
Jun 14 10:28:28 my_router user.err : 0009e000-000a0000 rw-p 0007e000 1f:05 2191 /usr/sbin/httpd
Jun 14 10:28:28 my_router user.err : 000a0000-000ad000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : 018d1000-018d2000 ---p 00000000 00:00 0 [heap]
Jun 14 10:28:28 my_router user.err : 018d2000-018d4000 rw-p 00000000 00:00 0 [heap]
Jun 14 10:28:28 my_router user.err : b6ad4000-b6ad9000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6add000-b6ae7000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6ae7000-b6ae9000 ---p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6ae9000-b6b27000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6b27000-b6b2a000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6b2a000-b6b4a000 r--s 00000000 00:0c 3107 /dev/nvram
Jun 14 10:28:28 my_router user.err : b6b4a000-b6b4e000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6b4e000-b6b63000 r-xp 00000000 1f:05 972 /lib/libiw.so
Jun 14 10:28:28 my_router user.err : b6b63000-b6b64000 r--p 00005000 1f:05 972 /lib/libiw.so
Jun 14 10:28:28 my_router user.err : b6b64000-b6b65000 rw-p 00006000 1f:05 972 /lib/libiw.so
Jun 14 10:28:28 my_router user.err : b6b65000-b6b7f000 r-xp 00000000 1f:05 969 /lib/libgcc_s.so.1
Jun 14 10:28:28 my_router user.err : b6b7f000-b6b80000 r--p 0000a000 1f:05 969 /lib/libgcc_s.so.1
Jun 14 10:28:28 my_router user.err : b6b80000-b6b81000 rw-p 0000b000 1f:05 969 /lib/libgcc_s.so.1
Jun 14 10:28:28 my_router user.err : b6b81000-b6b92000 r-xp 00000000 1f:05 1767 /usr/lib/libsharetools.so
Jun 14 10:28:28 my_router user.err : b6b92000-b6b93000 r--p 00001000 1f:05 1767 /usr/lib/libsharetools.so
Jun 14 10:28:28 my_router user.err : b6b93000-b6b94000 rw-p 00002000 1f:05 1767 /usr/lib/libsharetools.so
Jun 14 10:28:28 my_router user.err : b6b94000-b6bac000 r-xp 00000000 1f:05 1700 /usr/lib/libjansson.so.4.11.1
Jun 14 10:28:28 my_router user.err : b6bac000-b6bad000 r--p 00008000 1f:05 1700 /usr/lib/libjansson.so.4.11.1
Jun 14 10:28:28 my_router user.err : b6bad000-b6bae000 rw-p 00009000 1f:05 1700 /usr/lib/libjansson.so.4.11.1
Jun 14 10:28:28 my_router user.err : b6bae000-b6bce000 r-xp 00000000 1f:05 1642 /usr/lib/libdisc.so
Jun 14 10:28:28 my_router user.err : b6bce000-b6bcf000 r--p 00010000 1f:05 1642 /usr/lib/libdisc.so
Jun 14 10:28:28 my_router user.err : b6bcf000-b6bd0000 rw-p 00011000 1f:05 1642 /usr/lib/libdisc.so
Jun 14 10:28:28 my_router user.err : b6bd0000-b6bd1000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6bd1000-b6be6000 r-xp 00000000 1f:05 1747 /usr/lib/libnl-tiny.so
Jun 14 10:28:28 my_router user.err : b6be6000-b6be7000 r--p 00005000 1f:05 1747 /usr/lib/libnl-tiny.so
Jun 14 10:28:28 my_router user.err : b6be7000-b6be8000 rw-p 00006000 1f:05 1747 /usr/lib/libnl-tiny.so
Jun 14 10:28:28 my_router user.err : b6be8000-b6bfa000 r-xp 00000000 1f:05 1776 /usr/lib/libswitch.so
Jun 14 10:28:28 my_router user.err : b6bfa000-b6bfb000 r--p 00002000 1f:05 1776 /usr/lib/libswitch.so
Jun 14 10:28:28 my_router user.err : b6bfb000-b6bfc000 rw-p 00003000 1f:05 1776 /usr/lib/libswitch.so
Jun 14 10:28:28 my_router user.err : b6bfc000-b6c16000 r-xp 00000000 1f:05 1768 /usr/lib/libshutils.so
Jun 14 10:28:28 my_router user.err : b6c16000-b6c17000 r--p 0000a000 1f:05 1768 /usr/lib/libshutils.so
Jun 14 10:28:28 my_router user.err : b6c17000-b6c19000 rw-p 0000b000 1f:05 1768 /usr/lib/libshutils.so
Jun 14 10:28:28 my_router user.err : b6c19000-b6c3d000 r-xp 00000000 1f:05 1800 /usr/lib/libwireless.so
Jun 14 10:28:28 my_router user.err : b6c3d000-b6c3f000 r--p 00014000 1f:05 1800 /usr/lib/libwireless.so
Jun 14 10:28:28 my_router user.err : b6c3f000-b6c41000 rw-p 00016000 1f:05 1800 /usr/lib/libwireless.so
Jun 14 10:28:28 my_router user.err : b6c41000-b6c71000 r-xp 00000000 1f:05 1790 /usr/lib/libutils.so
Jun 14 10:28:28 my_router user.err : b6c71000-b6c76000 r--p 00020000 1f:05 1790 /usr/lib/libutils.so
Jun 14 10:28:28 my_router user.err : b6c76000-b6c78000 rw-p 00025000 1f:05 1790 /usr/lib/libutils.so
Jun 14 10:28:28 my_router user.err : b6c78000-b6c8d000 r-xp 00000000 1f:05 976 /lib/libnvram.so
Jun 14 10:28:28 my_router user.err : b6c8d000-b6c8e000 r--p 00005000 1f:05 976 /lib/libnvram.so
Jun 14 10:28:28 my_router user.err : b6c8e000-b6c8f000 rw-p 00006000 1f:05 976 /lib/libnvram.so
Jun 14 10:28:28 my_router user.err : b6c8f000-b6e1f000 r-xp 00000000 1f:05 1632 /usr/lib/libcrypto.so.1.1
Jun 14 10:28:28 my_router user.err : b6e1f000-b6e2f000 r--p 00180000 1f:05 1632 /usr/lib/libcrypto.so.1.1
Jun 14 10:28:28 my_router user.err : b6e2f000-b6e31000 rw-p 00190000 1f:05 1632 /usr/lib/libcrypto.so.1.1
Jun 14 10:28:28 my_router user.err : b6e31000-b6e32000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6e32000-b6e91000 r-xp 00000000 1f:05 1775 /usr/lib/libssl.so.1.1
Jun 14 10:28:28 my_router user.err : b6e91000-b6e95000 r--p 0004f000 1f:05 1775 /usr/lib/libssl.so.1.1
Jun 14 10:28:28 my_router user.err : b6e95000-b6e98000 rw-p 00053000 1f:05 1775 /usr/lib/libssl.so.1.1
Jun 14 10:28:28 my_router user.err : b6e98000-b6f05000 r-xp 00000000 1f:05 951 /lib/libc.so
Jun 14 10:28:28 my_router user.err : b6f05000-b6f06000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6f06000-b6f15000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : b6f15000-b6f17000 rw-p 0006d000 1f:05 951 /lib/libc.so
Jun 14 10:28:28 my_router user.err : b6f17000-b6f19000 rw-p 00000000 00:00 0
Jun 14 10:28:28 my_router user.err : be9d2000-be9f3000 rw-p 00000000 00:00 0 [stack]
Jun 14 10:28:28 my_router user.err : bead0000-bead1000 r-xp 00000000 00:00 0 [sigpage]
Jun 14 10:28:28 my_router user.err : bead1000-bead2000 r--p 00000000 00:00 0 [vvar]
Jun 14 10:28:28 my_router user.err : bead2000-bead3000 r-xp 00000000 00:00 0 [vdso]
Jun 14 10:28:28 my_router user.err : ffff0000-ffff1000 r-xp 00000000 00:00 0 [vectors]
Jun 14 10:28:28 my_router user.err : === Context:
Jun 14 10:28:28 my_router user.err : TRAPNO:0000000e ERRCODE:00000017 OLDMASK:00000000 R0:00000000
Jun 14 10:28:28 my_router user.err : R1:fffffff0 R2:00000000 R3:00000000 R4:b6b099e8
Jun 14 10:28:28 my_router user.err : R5:b6c3fdf4 R6:b6c3fda0 R7:00000000 R8:0000f4b0
Jun 14 10:28:28 my_router user.err : R9:b6b09250 R10:b6b09ac4 FP:b6c3fda0 IP:b6c3fd90
Jun 14 10:28:28 my_router user.err : SP:b6b09138 LR:b6ec05c0 PC:b6ec00e8 CPSR:60000010
Jun 14 10:28:28 my_router user.err : FAULTADDR:00000008
Jun 14 10:28:28 my_router user.err : === Backtrace:
Jun 14 10:28:28 my_router user.err : # Searching frame 0 (FP=0xb6c3fda0, PC=0xb6ec00e8)
Jun 14 10:28:28 my_router user.err : # PC-1cc[0xb6ebff1c]: 0xe92d4ff1 stmfd sp!
Jun 14 10:28:28 my_router user.err : # FP-00[0xb6c3fda0]: 0x00000001 {LR}
Jun 14 10:28:28 my_router user.err : # FP-04[0xb6c3fd9c]: 0x00000000 {FP}
Jun 14 10:28:28 my_router user.err : # FP-08[0xb6c3fd98]: 0x00000000 {R10}
Jun 14 10:28:28 my_router user.err : # FP-0c[0xb6c3fd94]: 0x00000000 {R9}
Jun 14 10:28:28 my_router user.err : # FP-10[0xb6c3fd90]: 0x00000000 {R8}
Jun 14 10:28:28 my_router user.err : # FP-14[0xb6c3fd8c]: 0x00000000 {R7}
Jun 14 10:28:28 my_router user.err : # FP-18[0xb6c3fd88]: 0x00000000 {R6}
Jun 14 10:28:28 my_router user.err : # FP-1c[0xb6c3fd84]: 0x00000000 {R5}
Jun 14 10:28:28 my_router user.err : # FP-20[0xb6c3fd80]: 0x00000000 {R4}
Jun 14 10:28:28 my_router user.err : # FP-24[0xb6c3fd7c]: 0x00000000 {R0}
Jun 14 10:28:28 my_router user.err : # Crashed at /lib/ld-musl-armhf.so.1[0xb6e98000](+0x000280e8)[0xb6ec00e8]
Jun 14 10:28:28 my_router user.err : # Searching frame 1 (FP=0x00000000, PC=0x00000001)
Jun 14 10:28:28 my_router user.err : # Instruction at 0x00000001 is not mapped; terminating backtrace.
Jun 14 10:28:28 my_router user.err : /lib/ld-musl-armhf.so.1[0xb6e98000](+0x000280e8)[0xb6ec00e8]
Jun 14 10:28:28 my_router user.err : ???(+0)[0x00000001]
Jun 14 10:28:28 my_router user.err : === Code:
Jun 14 10:28:28 my_router user.err : b6ec00a8: e5503003 e15020b2 e3510000 e203301f 0a000006 e3520000 0a000000 e7f000f0
Jun 14 10:28:28 my_router user.err : b6ec00c8: e5102008 e3520801 aa000000 e7f000f0 e3e0100f e0411202 e080c001 e7900001
Jun 14 10:28:28 my_router user.err : b6ec00e8: >e5901008 e151000c 0a000000 e7f000f0 e5d01014 e201101f e1510003 aa000000
Jun 14 10:28:28 my_router user.err : b6ec0108: e7f000f0 e590100c e1a01331 e3110001 0a000000 e7f000f0 e5901010 e1a01331
Jun 14 10:30:00 my_router user.info : [httpd] : maybe died, we need to re-exec it
Jun 14 10:30:00 my_router daemon.info httpd[3583]: [httpd] : httpd server started at port 800
Jun 14 10:30:00 my_router daemon.info httpd[3583]: [httpd] : httpd SSL server started at port 443
Jun 14 10:30:00 my_router user.info : [httpd] : http/https daemon successfully started

foz111
DD-WRT Guru

Joined: 01 Oct 2017
Posts: 690
Location: Earth

Posted: Tue Jun 14, 2022 9:28 Post subject:

Router Model: Netgear R7800 (2)
Firmware: DD-WRT v3.0-r49197 std (06/14/22)
Kernel Version: Linux 4.9.317 #1020 SMP Tue Jun 14 04:45:19 +07 2022 armv7l

Update: CLI r49113 > r49197
Reset: NO
Mode: Gateway
Status: Operational Minutes
Errors: None so far

Thank you BS & Devs
_________________
Netgear R7800 PPPoE Main Router
Network IPV4 - Isolated Vlan's with IoT Devices. Unifi AC-Pro x 3 AP's, Router Wi-Fi Disabled. OVPN Server With Paid Commercial Wireguard Client's. Gateway Mode, DNSMasq, Static Leases & DHCP, Pi-Hole DNS & Running Unbound.

No one can build you the bridge on which you, and only you, must cross the river of life!

MLandi
DD-WRT Guru

Joined: 04 Dec 2007
Posts: 983

Posted: Tue Jun 14, 2022 12:41 Post subject:

Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r49197 std (06/14/22)
Previous/Reset: DD-WRT v3.0-r49139 std (06/10/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: No issues
_________________
Netgear R9000
DD-WRT v3.0-r54420 std (12/04/23)
Linux 4.9.337 #686 SMP Wed Nov 29 03:14:52 +07 2023 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps

ho1Aetoo
DD-WRT Guru

Joined: 19 Feb 2019
Posts: 2589
Location: Germany

Posted: Tue Jun 14, 2022 12:57 Post subject:
Router/Version: R7800 File/Kernel: Linux 4.9.317 #1020 SMP Tue Jun 14 04:45:19 +07 2022 armv7l Previous/Reset: r49139 / no Mode/Status: Gateway / working Services Used: PPPoE,DHCP,DHCP-Reservation,Dnsmasq + PiHole,DDNS,SSH,WiFi 2,4Ghz + 5Ghz AP's + VAP's Vanilla,USB,Port forwarding,QoS Issues/Errors: nothing so far The httpd crash I posted in the r49139 thread is fixed as said before

RobrPatty
DD-WRT User

Joined: 06 Jun 2016
Posts: 174

Posted: Tue Jun 14, 2022 13:20 Post subject: R49197
Netgear Nighthawk X10 R9000 Firmware Version DD-WRT v3.0-r49197 std (06/14/22) Kernel Version Linux 4.9.317 #633 SMP Tue Jun 7 01:22:36 +07 2022 armv7l Current Time Tue, 14 Jun 2022 07:16:49 Uptime 2 min GUI over 49139 Reset: no Issues: all good Thank you BS & Devs

egc
DD-WRT Guru

Joined: 18 Mar 2014
Posts: 12479
Location: Netherlands

Posted: Tue Jun 14, 2022 13:36 Post subject:

Router Model: Linksys EA8500

Firmware Version: DD-WRT v3.0-r49197M Community Build by EGC (06/14/22)

Upgraded from: DD-WRT v3.0-r49113M Community Build by EGC (06/08/22)
Reset: No not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working

Errors: Nothing encountered at this moment

Big Thanks to the devs!!
_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087

Alozaros
DD-WRT Guru

Joined: 16 Nov 2015
Posts: 6181
Location: UK, London, just across the river..

Posted: Tue Jun 14, 2022 15:51 Post subject:

Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r49197 std (06/14/22)
Kernel Version Linux 3.18.140-d6 #145794 Tue Jun 14 09:26:34 +07 2022 mips

Router Model: Netgear R7800
Firmware: DD-WRT v3.0-r49197 std (06/14/22)
Kernel Version: Linux 4.9.317 #1020 SMP Tue Jun 14 04:45:19 +07 2022 armv7l

update: CLI r49139 > r49197
reset: NO
mode: Gateway
status: Operational 4h+
errors: Nothing new, yet...so far so good...GUI on 1043v2 is fine, i haven't tested R7800...
_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 53045 WAP
TP-Link WR1043NDv2 -DD-WRT 54420 Gateway/DoT,Forced DNS,AP Isolation,Ad-Block,Firewall,VPN,x1VLAN
TP-Link WR1043NDv2 -DD-WRT 54079 Gateway/DoT,Forced DNS,Ad-Block,Firewall,x4VLAN,VPN
TP-Link WR1043NDv2 -Gargoyle OS 1.15.x AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 54420 Gateway/DoT,AD-Block,Forced DNS,AP&Net Isolation,x3VLAN,Firewall,Vanilla
Netgear R9000 --DD-WRT 54079 Gateway/DoT,AD-Block,AP Isolation,Firewall,Forced DNS,x2VLAN,Vanilla
Broadcom
Netgear R7000 --DD-WRT 54079 Gateway/SmartDNS/DoH,AD-Block,Firewall,Forced DNS,x3VLAN,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby DNS over TLS I DNSCrypt v2 by mac913

nyddwrtuser330
DD-WRT User

Joined: 05 Mar 2018
Posts: 200

Posted: Tue Jun 14, 2022 16:57 Post subject:

R7800 wds STA / R9000 WDS AP
Upgrade without reset 06/07 build
Vanilla firmware both radios

r9000 running dnscrypt, inadyn, dhcp, dnsmasq, guest isolaed vap, SMB, QOS HTB-Cake

Services disabled since last update - Airtime fairness
uptime 4 hrs.

So far so good.

Edit: issue 1- Shortly after posting all hell broke loose, wifi connections are borked.
issue 2- swithcing firmware on 5 ghz from vannilla to dd-wrt causes a radio crash on r9000. Settings do commit but radio wont come up properly outside a reboot

from a log perspective all i was able to see was that 2 of my endpoints were cycling dhcp requests every minute. but there was no wifi drop / reconnect in between which was strange

Also i suspect (though i have no log to prove it), that background process activity is somehow screwing things up. As the last two problems i investigated occured either very shortly after a dnscrypt certificate fetch, or ntp update.

WRT the UI crashng on x10/r9000, for quite some builds this has been the case IF you have or are trying to configure the AD 60GHz radio. For most this wont be an issue since its not really a well supported standard, but might be whats causing the report and would be unique to x10/r9000

Last edited by nyddwrtuser330 on Tue Jun 14, 2022 18:41; edited 5 times in total

ho1Aetoo
DD-WRT Guru

Joined: 19 Feb 2019
Posts: 2589
Location: Germany

Posted: Tue Jun 14, 2022 17:09 Post subject:

@nyddwrtuser330

and the crash can be bypassed if you disable the 60Ghz radio?

Code:

nvram set wlan2_net_mode=disabled
nvram commit
reboot

msoengineer
DD-WRT Guru

Joined: 21 Jan 2017
Posts: 1782
Location: Illinois Moderator

Posted: Tue Jun 14, 2022 20:34 Post subject:

EA8500 users, R7800, and R9000.....

Try running Vanilla Firmware and make sure airtime fairness is disabled.

See how things run.

I have a feeling that Vanilla + SVN 48996 are not playing nice.... (Airtime Fairness code tweaks on 48996 and newer builds since)

Otherwise 48996+DD-wrt wifi firmware seems to work....

I other news, I have an AX201 on Win10 that won't seem go go beyond 100mpbs on speed tests despite having 866/866 both ways....

Don't have more time to troubleshoot...back to the chip shortage...
_________________
FORUM RULES

TIPS/TRICKS: Best QCA Wifi Settings | Latency tricks | QoS Port priority | NEVER USE MU-MIMO |
Why to NOT use MU-MIMO | Max Wifi Pwr by Country | Linux Wifi Pwr | AC MCS & AX MCS | QCA 5Ghz chnls to use | WIFI Freq WIKI | TFTP R7800 | Don't buy AX | IPERF3 How-To

[R9000]52396 nightly (Main Router)
[EA8500]43192 & 45493 (2xOffsite)
[R7800] resting
[WDR3600]BS 44715 (Offsite)
[A7v5]BS 43038 (Offsite+spare napping)

Last edited by msoengineer on Tue Jun 14, 2022 20:53; edited 1 time in total

bushant
DD-WRT Guru

Joined: 18 Nov 2015
Posts: 1963

Posted: Tue Jun 14, 2022 20:43 Post subject:
WNDR3700 V4 DD-WRT v3.0-r49197 std (06/14/22) Linux 3.18.140-d6 #145822 Tue Jun 14 10:26:05 +07 2022 mips CLI upgrade over 48646 No reset wlan1 WDS Sta w/wlan1.1 VAP, wlan0 AP,r45727 override All good

matjazk
DD-WRT User

Joined: 21 Aug 2019
Posts: 120
Location: Here, There And Everywhere

Posted: Tue Jun 14, 2022 21:59 Post subject:
I can confirm that on R9000 enabling 60 GHz radio is indeed the cause for wireless tab incomplete load and httpd crash. Disable the radio and the problem goes away ...

sumbuddie
DD-WRT User

Joined: 28 Mar 2009
Posts: 72

Posted: Tue Jun 14, 2022 22:22 Post subject:

msoengineer wrote:

EA8500 users, R7800, and R9000.....
Try running Vanilla Firmware and make sure airtime fairness is disabled.

I've had airtime fairness disabled for a long time. Regardless, the last few builds (after official 05-26-2022-r48971 or unpublished 05-27-2022-r48972) have been bad for me with WiFi issues or otherwise troublesome (lockup requiring backup partition recovery).

It's only with 06-10-2022-r49139 that I tried switching both radios from Vanilla to DD-WRT firmware type instead that's made a night/day difference. (after reading comments about Vanilla firmware being updated)

However, there are the new(ish) "Airtime Policy" and "Airtime Weight" settings that I've left as-is ("Dynamic Mode" and "1" respectively). Not sure if these have any effect on Airtime Fairness. (quick reading up, sounds like these are related - will disable as well).

Have not tried this build yet - waiting to read feedback here (but I'll likely try it anyhow.. Wink

)

mrjcd
DD-WRT Guru

Joined: 31 Jan 2015
Posts: 6232
Location: Texas

Posted: Wed Jun 15, 2022 2:48 Post subject:

msoengineer wrote:

EA8500 users, R7800, and R9000.....

Try running Vanilla Firmware and make sure airtime fairness is disabled.

Been that way long long time & neary a problem Cool

Code:

mrjcd@daDeb:~$ ssh root@citadel-station-homeworld.mrjcd.com
DD-WRT v3.0-r49197 std (c) 2022 NewMedia-NET GmbH
Release: 06/14/22
Board: Linksys EA8500
==========================================================

___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/

DD-WRT v3.0
https://www.dd-wrt.com

==========================================================

BusyBox v1.35.0 (2022-06-14 04:25:32 +07) built-in shell (ash)

root@Citadel-Station-Homeworld:~# uptime && date
21:43:22 up 8:25, load average: 0.06, 0.01, 0.00
Tue Jun 14 21:43:22 CDT 2022
root@Citadel-Station-Homeworld:~# ps
PID USER VSZ STAT COMMAND
1 root 1072 S /sbin/init
2 root 0 SW [kthreadd]
3 root 0 SW [ksoftirqd/0]
5 root 0 SW< [kworker/0:0H]
7 root 0 RW [rcu_sched]
8 root 0 SW [rcu_bh]
9 root 0 SW [migration/0]
10 root 0 SW< [lru-add-drain]
11 root 0 SW [cpuhp/0]
12 root 0 SW [cpuhp/1]
13 root 0 SW [migration/1]
14 root 0 SW [ksoftirqd/1]
16 root 0 SW< [kworker/1:0H]
17 root 0 SW [oom_reaper]
18 root 0 SW< [writeback]
19 root 0 SW [kcompactd0]
20 root 0 SW< [crypto]
21 root 0 SW< [bioset]
22 root 0 SW< [kblockd]
24 root 0 SW< [watchdogd]
26 root 0 SW [kworker/0:1]
43 root 0 SW [kswapd0]
44 root 0 SW< [vmstat]
70 root 0 SW< [cryptodev_queue]
74 root 0 SW< [bioset]
75 root 0 SW< [bioset]
76 root 0 SW< [bioset]
77 root 0 SW< [bioset]
78 root 0 SW< [bioset]
79 root 0 SW< [bioset]
80 root 0 SW< [bioset]
81 root 0 SW< [bioset]
82 root 0 SW< [bioset]
83 root 0 SW< [bioset]
84 root 0 SW< [bioset]
85 root 0 SW< [bioset]
86 root 0 SW< [bioset]
87 root 0 SW< [bioset]
88 root 0 SW< [bioset]
89 root 0 SW< [bioset]
90 root 0 SW< [bioset]
91 root 0 SW< [bioset]
92 root 0 SW< [bioset]
97 root 0 SW< [kworker/0:1H]
98 root 0 SW< [kworker/1:1H]
760 root 832 S /sbin/hotplug2 --set-rules-file /etc/hotplug2.rules --persistent
764 root 832 S /sbin/mstpd
772 root 1012 S irqbalance -t 10
814 root 0 SW< [cfg80211]
816 root 0 SW [kworker/1:2]
827 root 0 SW< [ath10k_wq]
828 root 0 SW< [ath10k_aux_wq]
829 root 0 SW< [ath10k_tx_compl]
834 root 0 SW< [ath10k_wq]
835 root 0 SW< [ath10k_aux_wq]
836 root 0 SW< [ath10k_tx_compl]
850 root 0 SW [kworker/0:2]
867 root 1800 S watchdog
1030 root 4688 S hostapd -B -P /var/run/wlan0_hostapd.pid /tmp/wlan0_hostap.conf
1078 root 4688 S hostapd -B -P /var/run/wlan1_hostapd.pid /tmp/wlan1_hostap.conf
1268 root 1416 S syslogd -Z -L
1271 root 1416 S klogd
1284 root 1208 S dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
1778 root 4788 S httpd -n -p 80
1780 root 1384 S resetbutton
2057 root 1764 S wland
2102 root 2012 S dnsmasq -u root -g root -C /tmp/dnsmasq.conf
2108 root 3516 S /tmp/openvpnserver --config /tmp/openvpn/openvpn.conf --daemon
2550 root 1416 S udhcpc -i vlan2 -p /var/run/udhcpc.pid -s /tmp/udhcpc -O routes -O msstaticroutes -O staticroutes
2925 root 0 SW< [ata_sff]
2935 root 0 SW [scsi_eh_0]
2939 root 0 SW< [scsi_tmf_0]
2949 root 0 SW [scsi_eh_1]
2952 root 0 SW< [scsi_tmf_1]
2955 root 0 SW [usb-storage]
2981 root 0 SW [scsi_eh_2]
2984 root 0 SW< [scsi_tmf_2]
2985 root 0 SW [usb-storage]
3296 root 0 SW< [bioset]
3305 root 0 SW< [bioset]
3478 root 0 SW [jbd2/sda1-8]
3480 root 0 SW< [ext4-rsv-conver]
3583 root 0 SW [jbd2/sdb1-8]
3584 root 0 SW< [ext4-rsv-conver]
3765 root 764 S wsdd2 -d -N Citadel-Station-Homeworld -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:49197
3775 root 876 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
3778 root 908 S ksmbd.mountd -c /tmp/smb.conf -u /tmp/smb.db
3787 root 0 SW [ksmbd-lo]
3793 root 0 SW [ksmbd-eth0]
3797 root 0 SW [ksmbd-vlan2]
3802 root 0 SW [ksmbd-br0]
3807 root 0 SW [ksmbd-br1]
3813 root 0 SW [ksmbd-tun2]
3941 root 764 S wsdd2 -d -N Citadel-Station-Homeworld -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:49197
4011 root 764 S wsdd2 -d -N Citadel-Station-Homeworld -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:49197
4038 root 764 S wsdd2 -d -N Citadel-Station-Homeworld -G WORKGROUP -b vendor:dd-wrt,model:Linksys EA8500,sku:49197
4368 root 0 SW [ksmbd-imq0]
4502 root 744 S cron
4507 root 1796 S process_monitor
4640 root 0 SW [kworker/1:0]
6887 root 0 SW< [kworker/u5:3]
6916 root 0 SW [kworker/u4:1]
7030 root 0 SW< [kworker/u5:0]
7090 root 0 SW< [kworker/u5:1]
7100 root 0 SW [kworker/u4:2]
7135 root 0 SW< [kworker/u5:2]
7159 root 0 SW [kworker/u4:0]
7161 root 0 SW [kworker/u4:3]
7171 root 1228 R dropbear -b /tmp/loginprompt -r /tmp/root/.ssh/ssh_host_rsa_key -p 22 -s
7172 root 1420 S -sh
7176 root 1424 R ps
root@Citadel-Station-Homeworld:~# dmesg | tail -15
[ 38.389961] EXT4-fs (sdb1): barriers disabled
[ 38.415611] EXT4-fs (sdb1): recovery complete
[ 38.415641] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: init_itable=0,nobarrier,nobh,barrier=0
[ 38.588536] IMQ driver unloaded successfully.
[ 38.922081] Linux kernel CIFS/SMB SERVER 3.4.4 by Namjae Jeon <linkinjeon@kernel.org>
[ 41.433532] IMQ: use 2 as queue number
[ 41.442652] IMQ driver loaded successfully. (numdevs = 16, numqueues = 2, imq_dev_accurate_stats = 1)
[ 41.442676] Hooking IMQ after NAT on PREROUTING.
[ 41.450953] Hooking IMQ before NAT on POSTROUTING.
[ 41.492579] br1: port 1(wlan0.1) entered learning state
[ 45.493866] br1: port 2(wlan1.1) entered learning state
[ 56.493140] br1: port 1(wlan0.1) entered forwarding state
[ 56.493387] br1: port 3(vlan4) entered learning state
[ 60.492669] br1: port 2(wlan1.1) entered forwarding state
[ 71.493836] br1: port 3(vlan4) entered forwarding state
root@Citadel-Station-Homeworld:~# uname -a
Linux Citadel-Station-Homeworld 4.9.317 #1018 SMP Mon Jun 13 15:19:32 +07 2022 armv7l DD-WRT
root@Citadel-Station-Homeworld:~#
Connection to citadel-station-homeworld.mrjcd.com closed.
mrjcd@daDeb:~$ uname -a
Linux daDeb 5.18.0-1-amd64 #1 SMP PREEMPT_DYNAMIC Debian 5.18.2-1 (2022-06-06) x86_64 GNU/Linux
mrjcd@daDeb:~$

Goto page 1, 2 Next

Display posts from previous:

Page 1 of 2

DD-WRT Forum Index -> Atheros WiSOC based Hardware

All times are GMT

Navigation

Jump to:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Log in

New Build - 06/14/2022 - r49197

Quick Links

Log in