New Build - 05/30/2022 - r48996

Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Mon May 30, 2022 10:14    Post subject: New Build - 05/30/2022 - r48996 Reply with quote
Welcome to Atheros r48996 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48971 (mirror)

OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
mDNS/Avahi dnscrypt PHP mdadm Tor DoT Redirect SmartDNS FreeRADIUS htop rtw88 mt76 ath10k ath5k SNMP OpenSSL
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 174

PostPosted: Mon May 30, 2022 13:26    Post subject: R48996 Reply with quote
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r48996 std (05/30/22)
Kernel Version Linux 4.9.316 #631 SMP Sat May 28 00:12:24 +07 2022 armv7l
Current Time Mon, 30 May 2022 07:16:34
Uptime 3 min
GUI over 48971
Reset: no
Issues: upgraded fine

Thanks BS & Devs
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Mon May 30, 2022 13:58    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: DD-WRT v3.0-r48996 std (05/30/22)
Previous/Reset: DD-WRT v3.0-r48971 std (05/26/22) / No
Mode/Status: Gateway / Working Normally
Issues/Errors: No issues

All looks good, thank you BS and Team.

_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps


Last edited by MLandi on Mon May 30, 2022 14:06; edited 1 time in total
LizardWizard
DD-WRT Novice


Joined: 14 Jan 2020
Posts: 47

PostPosted: Mon May 30, 2022 14:03    Post subject: Reply with quote
Router Model: Netgear R7800
Firmware: DD-WRT v3.0-r48996 std (05/30/22)
Kernel: Linux 4.9.316 #982 SMP Mon May 30 04:16:39 +07 2022 armv7l
Previous: GUI upgrade from DD-WRT v3.0-r48971 std (05/26/22)
Reset: No.
Status: Gateway / PPPoE, WAN MAC Clone, 5 GHz Mixed 80 MHz Vanilla, Port Forwarding, Static Leases, Wireless MAC Filter
Errors: None so far.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Mon May 30, 2022 15:00    Post subject: Reply with quote
Linksys EA8500 ... main gateway
DD-WRT v3.0-r48996 std (05/30/22)
Linux 4.9.316 #980 SMP Sat May 28 14:19:25 +07 2022 armv7l
GUI install over r48972
NO good for me ---reboots under bit of wireless load Sad
mostly noticed when traffic on vlan4 wired to TV, wlan1.1 casting to TV via chromecast wlan0.1

vlan4 / wlan0.1 / wlan1.1 all on br1 isolated from main net
she rebooted herself 3 times in 'bout 2.5 hrs

so --> booted back to r48972 ...all good again up ---> 11:56 Cool
and NO ain't been reset in long time
Wildlion
DD-WRT Guru


Joined: 24 May 2016
Posts: 1407

PostPosted: Mon May 30, 2022 15:29    Post subject: Reply with quote
Router: TL-WDR3600 v1
Firmware: tl-wdr3600_us-webflash.bin (v3.0-r48996 std)
Kernel: Linux 3.10.108-d11 #108512 Mon May 30 05:17:25 +07 2022 mips
Status: working
Reset: No
Notes on configuration:

    Client

Errors:


    1. 5Ghz wireless light is not on (2.4Ghz light works)




Router: DIR-825 rev B1
Firmware: dir825-firmware.bin (v3.0-r48996 std)
Kernel: Linux 3.10.108-d11 #108510 Mon May 30 04:58:59 +07 2022 mips
Status: Working
Reset: None
Notes on configuration: Used for Wifi Lab (no internet)
Errors:

    None



Router: Archer-A7 v5
Firmware: tplink_archer-a7-v5.bin (v3.0-r48996 std)
Kernel: Linux 3.18.140-d6 #143968 Mon May 30 07:55:31 +07 2022 mips
Status: Working
Reset: None
Notes on configuration:

    DNSMasq
    Virtual wireless with bridging x2
    multiple DHCP server

Errors:

    None
abhijitat
DD-WRT User


Joined: 06 Feb 2020
Posts: 167
Location: Maharashtra, India

PostPosted: Mon May 30, 2022 15:55    Post subject: Reply with quote
Router/Version: Netgear R7800
Firmware: DD-WRT v3.0-r48996 std (05/30/22)
Kernel: Linux 4.9.316 #982 SMP Mon May 30 04:16:39 +07 2022 armv7l
File/Upload: dd-wrt-webupgrade.bin / Upload using CLI
Mode: Gateway/AP
Reset: No
Previous: DD-WRT v3.0-r48886 std (05/16/22)
Setup Using: PPPOE, 2.4 GHz, 5.0 GHz, IPv4, DNSMasq, NTP TimeSync, WireGuard, Samba
Status: Working Fine; running DD-WRT firmware type for 2.4ghz & 5ghz, uptime 2+ Hrs.


Thank you BrainSlayer for Wonderful firmware.

Thanks all Guru for your help in forums.
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 266

PostPosted: Mon May 30, 2022 18:06    Post subject: Reply with quote
Netgear R6250
DD-WRT v3.0-r48996 std (05/30/22)
Linux 4.4.302-st14 #6122 SMP Mon May 30 03:51:57 +07 2022 armv7l

Work stable!

Upgrade via GUI without reset from r48971
catch22
DD-WRT User


Joined: 26 May 2014
Posts: 67
Location: Italy

PostPosted: Mon May 30, 2022 18:21    Post subject: Reply with quote
Update method: SSH / CLI
Router: Netgear XR500
Previous/Reset: DD-WRT v3.0-r48971 std (05/26/22) / No
Mode/Status: Gateway

It went in a boot loop after flashing. A hard reset seemed to solve the problem, but after reconfiguring the device it entered again in a boot llop. Back to 48971.


Last edited by catch22 on Tue May 31, 2022 0:49; edited 1 time in total
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 266

PostPosted: Mon May 30, 2022 18:57    Post subject: Reply with quote
Sorry, Buffalo WHR-G300NV2 missed the WAN IP after upgrade r48996 even try to DHCP renew...

[arch-zen@arch-zen Downloads]$ ssh root@192.168.1.1
DD-WRT v3.0-r48996 std (c) 2022 NewMedia-NET GmbH
Release: 05/30/22
Board: Buffalo WHR-G300N
root@192.168.1.1's password:
==========================================================

___ ___ _ _____ ______ ____ ___
/ _ \/ _ \___| | /| / / _ \/_ __/ _ __|_ / / _ \
/ // / // /___/ |/ |/ / , _/ / / | |/ //_ <_/ // /
/____/____/ |__/|__/_/|_| /_/ |___/____(_)___/

DD-WRT v3.0
https://www.dd-wrt.com


==========================================================


BusyBox v1.35.0 (2022-05-30 15:09:03 +07) built-in shell (ash)

root@DD-WRT:~# traceroute www.yahoo.com
root@DD-WRT:~# ping www.yahoo.com
root@DD-WRT:~# ip a
1: lo: <LOOPBACK,MULTICAST,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 brd 127.255.255.255 scope host lo
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN qlen 1000
link/ether 00:24:a5:34:bc:91 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br0 state UP qlen 1000
link/ether 00:24:a5:34:bc:91 brd ff:ff:ff:ff:ff:ff
5: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 00:24:a5:34:bc:91 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global br0
valid_lft forever preferred_lft forever
6: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br0 state UP
link/ether 00:24:a5:34:bc:91 brd ff:ff:ff:ff:ff:ff

So try to reflash r48897 but bricked...do not worry, I can fix it.
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 1008

PostPosted: Mon May 30, 2022 21:20    Post subject: Reply with quote
I've had two unexpected router reboots in the 8 hours I've had this version installed. The reboots are clean and act like I sent the reboot command myself. I am not used to having the router reboot itself. I'm not sure if this is my router or setup, or a problem with the build.
_________________
Netgear R9000
DD-WRT v3.0-r55460 std (03/25/24)
Linux 4.9.337 #715 SMP Mon Mar 25 06:15:53 +07 2024 armv7l
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, no SFE, SmartDNS, no QoS
2.4GHz: Vanilla, Airtime Fairness, NG-Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
5GHz: Vanilla, Airtime Fairness, AC/N Mixed, ACK Timing 3150, WPA2 w/AES & WPA3
2 Netgear AX1800 WiFi Mesh Extenders
Xfinity 1.2Gbps/35Mbps
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 266

PostPosted: Mon May 30, 2022 22:52    Post subject: Reply with quote
Verify that r48996 work well now!

Buffalo WHR-G300NV2
Firmware: DD-WRT v3.0-r48996 std (05/30/22)
Kernel : Linux 3.10.108-d11 #108594 Mon May 30 15:08:47 +07 2022 mips

Using linux unbrick it
Flash buffalo-to-dd-wrt_webflash-MULTI.bin in buffalo GUI 192.168.11.1
Then after 4min, flash whr-g300nv2-firmware-MULTI.bin in GUI. All version is r48996.

Thanks a lot!
nyddwrtuser330
DD-WRT User


Joined: 05 Mar 2018
Posts: 217

PostPosted: Mon May 30, 2022 23:26    Post subject: Reply with quote
Netgear R9000
Previous - 5/26 build 488971
Reset - No

Errors ---- Router Crashed after 2 hrs uptime, rebooted crashed again, build is not stable on this router, reverting.

Services - SMB, 5GHz WDS AP VHT 80, 2.4 GHz HT 40, Dnscrypt - cisco, DOT redirect Dns Redirect, inadyn, QOS - HTB/Cake

I was unable to retrieve any logs that would be helpful unfortunately.
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 6268
Location: Texas

PostPosted: Tue May 31, 2022 2:59    Post subject: Reply with quote
just a NOTE:

Linksys EA8500
DD-WRT v3.0-r49028 std (05/31/22)
Linux 4.9.316 #982 SMP Mon May 30 04:16:39 +07 2022 armv7l
GUI install over r48972
same bad shit as r48996 Sad

tried exact same as I was doing last night --caused her to reboot... Rolling Eyes

booted back into r48972 doing same with wireless -- she runs perfectly fine.
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 951

PostPosted: Tue May 31, 2022 10:23    Post subject: Reply with quote
Router/Version: Netgear XR500
File/Kernel: dd-wrt-webupgrade.bin / Linux 4.9.316 #982 SMP Mon May 30 04:16:39 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48971 std (05/26/22) / no
Mode/Status: AP, SFE, AP 5GHz Mixed 80MHz + AP 2.4GHz NG-Mixed 40MHz, DDNS (Dynu), ondemand CPU governor at night, USB Storage (guide by egc), lighttpd (using Entware’s php8), Cron / working
Issues/Errors: randomly reboot

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)


Last edited by IONK on Sun Jun 05, 2022 4:02; edited 1 time in total
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum