[blkt]

Welcome to Broadcom r48971 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.

Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48954 (mirror)

• OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
• WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • TP-Link Archer C8 v2, v3 support.
• mDNS/Avahi dnscrypt PHP mdadm Tor DoT Redirect SmartDNS FreeRADIUS htop rtw88 mt76 ath10k ath5k SNMP OpenSSL
• In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD update • ANTFS/NTFS3 kernel mode driver++++
• New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
• Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
• Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUI but v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at boot are fixed, both unbridged (r40634) and bridged (r47822). Please test, remove startup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missing via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:

[IONK]

Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin (r48971) / Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48954 std (05/23/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + DDNS (Dynu) + USB Storage (guide by egc) + Cron / working
Issues/Errors: none

[PaulGo]

Router/Version: Netgear R6300v1
Firmware Version: DD-WRT v3.0-r48971 giga (05/26/22)
Kernel Version: Linux 4.4.302 #16084 Thu May 26 05:17:37 +07 2022 mips
[b]Previous/Reset: r48954 No reset
Mode/Status: Gateway / Working
Issues/Errors: None

With IPv6 enabled, I found on IPv6 speed test sites the using the CTF shortcut forwarding engine gave me much slower results than using SFE.

[pawhtiobo]

Router/Version: TP-Link Archer C9 v2
File/Kernel: archer-c9v2-webflash.bin/Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous/Reset: r48886/no
Mode/Status: Gateway/2.4GHz & 5GHz AP/DHCP server/DNS Server/Port forwarding/ipv4 only
Issues/Errors: no errors, uptime ~1h.

Ty BS, the other developers, and the community!

[KACTET]

Router/Version: Linksys WRT54GL v1.1
File/Kernel: dd-wrt.v24 mini generic r48971 / Linux 2.4.37 #68597 Thu May 26 02:17:31 +07 2022 mips
Previous/Reset: dd-wrt.v24 mini generic r48865 / no
Mode/Status: Gateway / Working
Issues/Errors: installed since release, ok.

Thank you BS and thanks you gurus for your guides and wisdom

[saphirely]

Netgear R6250
DD-WRT v3.0-r48971 std (05/26/22)
Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l

Upgrade from r48954 via CLI without reset.

Work stable with dnscrypt-proxies.

Especially R6250 and Buffalo can let my PC (FBSD13.1) connect ethernet cable.
How ever, Linksys WRT1900ACS (V1) cannot, it is very strange. And linux or Windows10 is working well connection. It only caused FBSD13.1 in trouble!

Detail info on FBSD13.1 is:
detail info:
re0: flags=8843<UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM, TXCSUM,VLAN_MTU, VLAN_HWTAGGING, VLAN_HWCSUM,WOL_MAGIC, LINKSTATE>
ether a4:1f:72:xx:xx:xx
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>

[saphirely]

Sorry, my Linksys WRT1900ACS
DD-WRT v3.0-r48971 std (05/26/22)
Linux 4.9.315 #3227 SMP Thu May 26 02:24:43 +07 2022 armv7l

updated to latest version, works well except connect FBSD13.1 PC in trouble, the same cable.

[L30Z3N]

Router Model: Netgear R7000
Firmware Version: DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous/Reset: r45955/Yes
Mode/Status: PPPoE/Working
Issues/Errors: None

Thank you all devs for your amazing job!

[strange]

Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Wireless: Vanilla
Temperatures: CPU 71.4 °C / WL1 55.5 °C
Current Time: Fri, 27 May 2022 19:28:52
Uptime: 1 day, 1:26
Reset: No
GUI install over 48865
Installed using Brave browser over wireless
No issues

Thank you BS and thanks you gurus for your guides and wisdom

[mac913]

HOME Wired Multicast ISP 4K TV Network

Router/Version: R7000
File/Kernel: DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous/Reset: r48741-GoodBuild / No Reset, GUI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,SFE=CTF,SSH,Syslog
Services Disabled: FA,WiFi,QoS,ttraff,Telnet,NAS,Samba

Running for over 21 hours.


OffSite #1

Router/Version: R7000
File/Kernel: DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous/Reset: r48741-GoodBuild / No Reset, Remote SSH Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6

Running for over 20 hours.


OffSite #2

Router/Version: R7000
File/Kernel: DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous/Reset: r48741-GoodBuild / No Reset, Remote SSH Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-PD,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: SFE,QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6

Running for over 3 hours.


Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

[the-joker]

Router/Version: Anus RT-AC68U E1 (C1 via DD-WRT)
File/Kernel: asus_rt-ac68u-firmware.trx / Linux 4.4.302-st14
Kernel Version: Linux 4.4.302-st14 #6090 SMP Sat May 28 03:37:03 +07 2022 armv7l
Previous/Reset: -r48957 dev build / No Reset, CLI Update
Mode/Status: Gateway/AP : Works has issues that need verification.

I ran this build for a 24 hours, I am now on 05-28-2022-r48982 dev build also working fine.

1) Router reboots if you have a WiFi client swap AP's in fast succession (if able to duplicate please post serial logs)

Thanks for the cooperation and help in reproducing and testing/reporting

2) Administrator -> Commands -> Run Command This function has shown that some commands executed here do not return the expected result like a normal terminal does. The example is an extreme scenario but is not the only issue.

[twindragon6]

Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r48971 std (05/26/22)
Kernel: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info.
Reset: Nope.
Previous: 05-23-2022-r48954
Status: Working really well so far. Access Restrictions do not appear to be working properly, still testing.
Temperatures: CPU 64.7 °C / WL0 53.0 °C / WL1 54.4 °C
Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.

[hurleyp]

Firmware: v3.0-r48971 std (05/26/22)
Router/Version: Netgear R7000
Kernel: Linux 4.4.302 #6057 SMP Wed May 25 07:05:05 +07 2022 armv7l
Previous: v3.0-r48954 std (05/23/22)
Mode/Status: AP wired and wireless / Up and running for 1.5 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.5 °C / WL1 51.5 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).

Upload and Download speeds are to ISP spec (500/500 Mbps).

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

[belegdol]

Router/Version: Netgear R6300v1
File/Kernel: dd-wrt.v24-48971_NEWD-2_K3.x_giga-R6300.bin/Linux 4.4.302 #16084 Thu May 26 05:17:37 +07 2022 mips
Previous/Reset: 48810, no reset
Mode/Status: AP switch
Issues/Errors: none so far.

[radoslavv]

Router/Version: Netgear WNDR4500v1
File/Kernel: dd-wrt.v24-48971_NEWD-2_K3.x_giga-WNDR4500.bin (48971)
Previous/Reset: 44112/48971
Mode/Status: 2.4GHz client, 5GHz AP, Gateway mode
Issues/Errors: Gateway mode does not work, internet is not reachable for LAN and AP clients; router as such can traceroute and ping outer world. Same behaviour no matter if WireGuard is active or not. Did also configuration reset, no behaviour change. WireGuard started to work with R6700v3/r44112 finally, but not useable w/o internet reachability for LAN & AP clients.

Router/Version: Netgear R6700v3
File/Kernel: netgear-r6700v3-webflash.bin (48971)
Previous/Reset: 43886/43886
Mode/Status: 2.4GHz AP, 5GHz AP, Gateway mode
Issues/Errors: Gateway mode does not work, internet is not reachable for LAN and AP clients; router as such can traceroute and ping outer world. Same behaviour no matter if WireGuard is active or not.

Overall seems something wrong with Gateway mode and internet / WAN reachability.