New Build - 05/26/2022 - r48971

Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.)
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5660

PostPosted: Thu May 26, 2022 11:54    Post subject: New Build - 05/26/2022 - r48971 Reply with quote
Welcome to Marvell r48971 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48954 (mirror)

OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
• WRT1200AC, WRT1200AC V2, WRT1900AC, WRT1900AC V2, WRT1900ACS, WRT1900ACS V2, WRT3200ACM and WRT32X.
mDNS/Avahi dnscrypt PHP mdadm Tor DoT Redirect SmartDNS FreeRADIUS htop rtw88 mt76 ath10k ath5k SNMP OpenSSL
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 266

PostPosted: Thu May 26, 2022 15:35    Post subject: Reply with quote
Linksys WRT1900ACS
DD-WRT v3.0-r48971 std (05/26/22)
Linux 4.9.315 #3227 SMP Thu May 26 02:24:43 +07 2022 armv7l

Upgrade from r48954 via CLI without reset

Work stable with unbound.

But I have one trouble only on FBSD13.1:
After fbsd13.1 released, from r48954 & r48971, my NIC with ethernet cable to WRT1900ACS cannot connect.

detail info:
re0: flags=8843<UP, BROADCAST, RUNNING, SIMPLEX, MULTICAST> metric 0 mtu 1500
options=8209b<RXCSUM, TXCSUM,VLAN_MTU, VLAN_HWTAGGING, VLAN_HWCSUM,WOL_MAGIC, LINKSTATE>
ether a4:1f:72:xx:xx:xx
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>

But it connected successfully to Netgear R6250 with the same cable whatever firmware r48954 & r48971.

And for some Linux distro and Window10, the cable connection from PC to WRT1900ACS is working well.
dpp3530
DD-WRT Guru


Joined: 12 Dec 2007
Posts: 764
Location: Pittsburgh, PA USA

PostPosted: Thu May 26, 2022 19:46    Post subject: Reply with quote
Router/Version: WRT1900AC v1
File/Kernel: r48971 STD
Previous/Reset: r48786 std, no reset
Mode/Status: Gateway, OpenVPN server, Wireguard server, AP, IPV6, Entware, DoT using Stubby
Issues/Errors: Nothing visible so far. Thanks devs.

_________________
__________________________
Netgear R7800
DD-WRT v3.0 STD
Linksys WRT1900AC
DD-WRT v3.0 STD
oliver44
DD-WRT Guru


Joined: 01 Jun 2016
Posts: 504

PostPosted: Sat May 28, 2022 4:17    Post subject: Reply with quote
Router Model Linksys WRT1900ACS v2
Firmware Version DD-WRT v3.0-r48971 std (05/26/22)
Kernel Version Linux 4.9.315
Uptime 5:58


connection Type PPPoE-IPv6 Type DHCPv6 with Prefix Delegation-,No release on reconnect-on, Schedule Reboot- All ok

Encrypt DNS-ok

Port Forwarding ok

Wireless Interface 5GHz-Wireless Mode AP-Wireless Network Mode-AC, Width VHT 80 Mhz-Wireless Channel-36-Short GI, Short Preamble,Single User Beamforming, Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES, Regulatory Domain Romania , all-ok

Wireless Interface 2.4GHz-Wireless Mode AP-Wireless Network Mode-N/G, Width VHT 40 Mhz-Wireless Channel-6, Extension Channel Lower,Short Preamble, Short GI , Radio Scheduling, Enable-WPA2 Personal-CCMP-128 (AES)all-ok

_________________
Internet provider https://en.wikipedia.org/wiki/RCS_%26_RDS 1Gbps
WDR3600 rev.1.5 - DD-Wrt
Linksys WRT1900ACS v.2 DD-Wrt/-OpenWrt



https://ipv6.chappell-family.com/ipv6tcptest/
https://en.internet.nl/connection/e91f490fe1c54cb2b78145c0ab0d2b5a/results
http://www.dnssec-or-not.com/
https://dnscheck.tools/#results
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Marvell MVEBU based Hardware (WRT1900AC etc.) All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum