Posted: Wed May 18, 2022 20:53 Post subject: New Build - 05/18/2022 - r48897
Welcome to Broadcom r48897 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Trendnet TEW-811DRU / DD-WRT v3.0-r48897 mini (05/18/22)
File/Kernel: trendnet-811dru-webflash.bin / Linux 4.4.302 #5965 Wed May 18 14:27:02 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48810 mini (05/06/22) / no
Mode/Status: Client AP/ Booted clean, CPU 81.4 °C / WL0 53.3 °C / WL1 57.6 °C, uptime 8 mins
temps seem lower than prev, UI ok - stable so far
Issues/Errors: none yet, thx devs
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Fri May 20, 2022 12:23 Post subject:
To avoid cluttering the post with a duplicate information about the issues Ive noticed, I leave links instead, for those of us who dare to go further than the usual basic reports, if any at all besides me, myself and I.
Other than that, I'm now running this build upgraded from previous r48886 and newer test builds in between and after currently on dev test build r48943
Posted: Fri May 20, 2022 14:02 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r48897 std (05/18/22) Kernel: Linux 4.4.302 #5962 SMP Wed May 18 14:03:36 +07 2022 armv7 Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope. Previous: 05-16-2022-r48886 Status: Working really well so far, still testing. Temperatures: CPU 62.5 °C / WL0 52.5 °C / WL1 53.5 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest-4.jpg
Description:
Speedtest Over 5.8GHz Wireless.
Filesize:
56.74 KB
Viewed:
3051 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Flashed this morning. Working well so far. VAPs/WAPs/VLANs all working. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r53562
Features in use: multiple VLANs over single trunk port
Linksys EA8500 WDS Station x2 - DD-WRT r53562
Netgear R6400v2 WAP, VAP 2.4ghz only w/VLANs over single trunk port.
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
Firmware: v3.0-r48897 std (05/18/22)
Router/Version: Netgear R7000 Kernel: Linux 4.4.302 #5962 SMP Wed May 18 14:03:36 +07 2022 armv7l
Previous: v3.0-r48886 std (05/16/22)
Mode/Status: AP wired and wireless / Up and running for 2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 61.4 °C / WL0 46.7 °C / WL1 51.9 °C
Issues/Errors: Nothing significant
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Upload and Download speeds are to ISP spec (500/500 Mbps).
Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware _________________ Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Sat May 21, 2022 16:36 Post subject:
hurleyp wrote:
Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).
Well you are in the 1% everyone else would have been pulling hairs out with the gremlins banging on the door Honestly no idea how that's even possible considering the insane amount of nvram changes and general firmware changes since r36325 which build doesn't exist on servers.