Posted: Mon May 16, 2022 11:21 Post subject: New Build - 05/16/2022 - r48886
Welcome to Broadcom r48886 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specificrecovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.
Issues, observations, and/or workarounds reported:
• WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
• DNScrypt 1.95 can still be used in WebUIbut v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
• WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
• VAPs not working at bootare fixed, both unbridged (r40634) and bridged (r47822). Please test, removestartup commands.
• If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
• Broadcom ARM devices if 5 GHz channels are missingvia Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
• Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!
Important:
• Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: stracetcpdumpwireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.
Router/Version: Linksys WRT600N v1.1 File/Kernel: DD-WRT v3.0-r48886 mega (05/16/22)
Kernel Version: Linux 4.4.302 #2257 Mon May 16 06:44:37 +07 2022 mips Previous/Reset: DD-WRT v3.0-r46294 mega (04/06/21) / Yes Mode/Status: Gateway Issues/Errors: VLAN not working
The VLAN does not seems to work in this build. The previous build I was using (DD-WRT v3.0-r46294 mega (04/06/21) the LAN was working just fine the only issue I had was that the link status was not showing correctly.
Please advise on how to get this fixed. I attached the boot logs here.
[Edit] Added screenshots of my setup. The setup is very simple and I have another router connected to port 4 for testing.
Joined: 08 May 2018 Posts: 14102 Location: Texas, USA
Posted: Mon May 16, 2022 15:59 Post subject:
Do a hard reset and reconfigure from scratch. You went from a pre-swconfig build to a post-swconfig build. You shouldn't need to use command-line startup scripts via swconfig utility to make your VLAN configuration work, but if you run into an issue there, please open a new thread to discuss.
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Mon May 16, 2022 16:18 Post subject:
To avoid cluttering the post with a duplicate information about the issues Ive noticed, I leave links instead, for those of us who dare to go further than the usual basic reports, if any at all besides me, myself and I.
Posted: Mon May 16, 2022 18:18 Post subject: Netgear Nighthawk R7000
Router/Version: Netgear R7000 Firmware: DD-WRT v3.0-r48886 std (05/16/22) Kernel: Linux 4.4.302 #5916 SMP Mon May 16 01:04:49 +07 2022 armv7l Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info. Reset: Nope. Previous: 05-13-2022-r48865 Status: Working really well so far, still testing. Temperatures: CPU 62.5 °C / WL0 52.2 °C / WL1 53.6 °C Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.
Speedtest-3.jpg
Description:
Speedtest Over 5.8GHz Wireless.
Filesize:
64.83 KB
Viewed:
3014 Time(s)
Logs.txt
Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!
Router/Version: Linksys WRT54GL v1.1
Firmware: dd-wrt.v24_std_generic (05/16/22)
Reset: Yes
Previous: 03-15-2022
Status: Seems to be working now, but not connected to anything useful. This build seems to flash these old routers now just fine now. Thanks BS. _________________ Linksys EA8500 (Internet Gateway, AP/VAP) - DD-WRT r53562
Features in use: WDS-AP, Multiple VLANs, Samba, WireGuard, Entware: mqtt, mlocate, gcc
Netgear R7800 (WDS-AP, WAP, VAP) - DD-WRT r53562
Features in use: multiple VLANs over single trunk port, multiple VAPs
Linksys EA8500 WDS Station x2 - DD-WRT r53562
OSes: Fedora 38, 9 RPis (2,3,4,5), 20 ESP8266s: Straight from Amiga to Linux in '94, never having owned a Windows PC.
Do a hard reset and reconfigure from scratch. You went from a pre-swconfig build to a post-swconfig build. You shouldn't need to use command-line startup scripts via swconfig utility to make your VLAN configuration work, but if you run into an issue there, please open a new thread to discuss.
Router/Version: Asus RT-AC56U
File/Kernel: DD-WRT v3.0-r48886 std (05/16/22)
Kernel Version: Linux 4.4.302 #5916 SMP Mon May 16 01:04:49 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-48810 std (05/06/21) / Yes
Mode/Status: AP
Issues/Errors: one router works okay with it, the other fails to boot (but works okay with May 13 build). _________________ 2 times APU2 Opnsense 21.1 with Sensei
2 times RT-AC56U running DD-WRT 45493 (one as Gateway, the other as AP, both bridged with LAN cable)
3 times Asus RT-N16 shelved
E4200 V1 running freshtomato 2020.8 (bridged with LAN cable)
3 times Linksys WRT610N V2 converted to E3000 and 1 original E3000 running freshtomato 2020.8 (bridged with LAN cable)
Router/Version: Asus RT-AC68U
Previous: 48810
Reset: NO
Issues/Errors: Bricked router, endless boot loop. Was unable to restore it with asus recovery tool, it won't load asus firmware, cancelling upload somewhere near 30% upload. Managed to bring it back to life with asus recovery tool uploading dd-wrt 48810 firmware instead of asus firmware.
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Tue May 17, 2022 6:00 Post subject:
falcon111 wrote:
Router/Version: Asus RT-AC68U
Previous: 48810
Reset: NO
Issues/Errors: Bricked router, endless boot loop. Was unable to restore it with asus recovery tool, it won't load asus firmware, cancelling upload somewhere near 30% upload. Managed to bring it back to life with asus recovery tool uploading dd-wrt 48810 firmware instead of asus firmware.
I have the same router has you, it works just fine with current and your previous DD-WRT version. You will need to reset to factory with DD-WRT, upgrade to this build and manually reconfigure, to ensure no gremlins gonna get you.
I have the same router has you, it works just fine with current and your previous DD-WRT version. You will need to reset to factory with DD-WRT, upgrade to this build and manually reconfigure, to ensure no gremlins gonna get you.
I've tried to reset it by pressing reset button - still boot loop. Hoped watchdog will reset it after several unsuccessful attempts to start - nothing helped. Last time i've did the reset nvram was 48810, running just now.
Bad thing, that reset button did not cleared nvram and did not bring the router back to life, so i had to start it with WPS pressed, then additionally press reset, then release the wps button and then release the reset button - only this way router was found by asus recovery tool.
the-joker wrote:
DO NOT go back to ASUS Firmware, it locks you to it permanently and you wont be able to install any 3rd party anything, unless you spend a few hours finding an asus fw build thats not locked and use the recovery tool to flash it and then move to dd-wrt.
Router/Version: TEW-811DRU, DD-WRT v3.0-r48886 mini
File/Kernel: trendnet-811dru-webflash.bin / Linux 4.4.302 #5804 Fri May 6 03:57:27 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48810 mini (05/06/22) / no
Mode/Status: Client/AP / unresponsive, may be bricked.
update: reverted to 48810 via tftp after a little work
Issues/Errors: bricked not furnishing DHCP via LAN, wireless SSIDs not showing. Do NOT use this build
Last edited by angler on Thu May 19, 2022 8:21; edited 1 time in total