Posted: Tue May 17, 2022 12:01 Post subject: Linksys WRT160NL or E2100L fulldump or bootloader
I have a WRT160NL which has a kernel panic in the serial console on stock firmware. After flashing to DD-WRT, it stuck at the "calculate loop" line in the serial console.
I replaced the RAM with 64MB and checked the flash in the programmer, so there is no problem with it.
I flash bootloader breed it works but no firmware starts correctly because breed only supports TP-link and Atheros SDK
I think I need a flash fulldump to flash IC
Linksys support does not have full dump or bootloader files
Joined: 31 Jul 2021 Posts: 2146 Location: All over YOUR webs
Posted: Sun Jul 10, 2022 7:45 Post subject:
Welcome to the forums.
Just bumping thread for visibility. Sorry for late reply, seems your thread was buried.
I'm not sure however if this RAM upgrade is likely the culprit for your woes.
For your future reference, a good practice is to do flash dumps yourself before you do any modding/changes, you always have a known working backup file.