New Build - 05/13/2022 - r48865

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware
Goto page 1, 2, 3  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3872

PostPosted: Fri May 13, 2022 5:06    Post subject: New Build - 05/13/2022 - r48865 Reply with quote
Welcome to Atheros r48865 beta release thread for reporting, feedback to developers and community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48810 (mirror)

OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Select ath10k radios now feature on-the-fly firmware type switching between customized DD-WRT and vanilla QCA binaries!
mDNS/Avahi ZFS Zstd dnscrypt bootfail PHP mdadm Tor DoT Redirect SmartDNS freeradius htop rtw88 mt76 ath10k ath5k
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 9585
Location: Netherlands

PostPosted: Fri May 13, 2022 7:35    Post subject: Reply with quote
Router Model: Netgear R7800

Firmware Version: DD-WRT v3.0-r48865 std (05/13/22)

Upgraded from: DD-WRT v3.0-r48741 std (04/26/22)

Reset: No, not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, port forwarding, DDNS, WOL 2,4GHz, VAP for IoT, 5Ghz (Vanilla Firmware),

Errors: Nothing encountered yet

Thanks BS!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 5007
Location: UK, London, just across the river..

PostPosted: Fri May 13, 2022 9:03    Post subject: Reply with quote
Router Model: Netgear R7800
Firmware Version: DD-WRT v3.0-r48865 std (05/13/22)
Kernel Version Linux 4.9.312 #948 SMP Fri May 13 03:10:08 +07 2022 armv7l

Router Model TP-Link WR1043ND V2
Firmware Version DD-WRT v3.0-r48865 std (05/13/22)
Kernel Version Linux 3.18.140-d6 #142408 Fri May 13 07:55:45 +07 2022 mips

update: CLI r48810 > r48865
reset: NO
mode: Gateway
status: Operational 3h+
errors: Nothing new, yet... Thanks BC and devs!

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 48646 WAP
TP-Link WR1043NDv2 -DD-WRT 48865 Gateway,DNS,AP Isolation,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -DD-WRT 48646 Gateway,DNS,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -Gargoyle OS 1.13.0b AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 48886 Gateway,DNS,AD-Block,AP&Net Isolation,VLAN's,Firewall,DoT,Vanilla
Netgear R9000 --DD-WRT 48646 Gateway,DNS,AD-Block,AP Isolation,Firewall,Forced DNS,DoT,2,4Ghz only,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 48886 Gateway,DNS,AD-Block,Firewall,Forced DNS,VLAN's,DoT,VPN
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
LizardWizard
DD-WRT Novice


Joined: 14 Jan 2020
Posts: 19

PostPosted: Fri May 13, 2022 9:49    Post subject: Reply with quote
Router Model: Netgear R7800
Firmware: DD-WRT v3.0-r48865 std (05/13/22)
Kernel: Linux 4.9.312 #948 SMP Fri May 13 03:10:08 +07 2022 armv7l
Previous: GUI upgrade from DD-WRT v3.0-r48810 std (05/06/22)
Reset: No.
Status: Gateway / PPPoE, WAN MAC Clone, 5 GHz Mixed 80 MHz, Port Forwarding, Static Leases, Wireless MAC Filter
Errors: None so far.
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 9585
Location: Netherlands

PostPosted: Fri May 13, 2022 12:59    Post subject: Reply with quote
Router Model: Linksys EA8500

Firmware Version: DD-WRT v3.0-r48865M Community Build by EGC (05/13/22)

Upgraded from: DD-WRT v3.0-r48811M Community Build by EGC (05/06/22)
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, 2.4 GHz and 5 GHz switched off, OpenVPN server working, WireGuard Server working (multiple clients e.g. phone, laptop and site-to-site connection with remote location), NAS and Samba working, Avahi and Avahi-utils working

Errors: Nothing encountered at this moment

Big Thanks to the devs!!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 663

PostPosted: Fri May 13, 2022 13:02    Post subject: Reply with quote
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: 05/13/2022 - r48865(05/06/22)
Previous/Reset: DD-WRT v3.0-r48810 std / No
Mode/Status: Gateway / FAILED
Issues/Errors: CRITICAL ISSUE

After flashing, the R9000 would not finish the reboot. A factory reset did bring the router online with the new version. I tried to restore my settings backup from r48865 but on reboot the router hung. I factory reset again, flashed back to r48810 and restored my backup. All is normal now.

Either I had an unusual, unique issue updating or there is a problem with r48865 on the Netgear R9000.

BE CAREFUL WITH THIS UPDATE IF YOU HAVE A R9000

_________________
Netgear R9000 X10
DD-WRT v3.0-r48810 std (05/06/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
Vanilla Firmware, WiFi & Ethernet
2.4GHz: NG-Mixed, 10 + 6 (2457 MHz HT40), ACK Timing 450, WPA2 w/AES
5GHz: AC/N Mixed, 100 + 114 (5500 MHz VHT160), ACK Timing 450, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
Molle
DD-WRT User


Joined: 13 Jan 2015
Posts: 78
Location: Finland

PostPosted: Fri May 13, 2022 15:53    Post subject: Reply with quote
Router/Version: Netgear R7800
Previous/Reset: r48741 (CLI update) / No
Status: OK

DD-WRT firmware on 5 GHz (WDS AP, AC/N-Mixed, VHT80), Vanilla on 2.4 GHz (AP, NG-Mixed, Wide HT40).
IPv4, DHCP Server, DNSMasq, Static Leases, NTP Client, Ondemand Governor.

Router/Version: Linksys EA8500
Previous/Reset: r48741 (CLI update) / No
Status: OK

DD-WRT firmware on 5 GHz (WDS Station, AC/N-Mixed, VHT80), 2.4 GHz disabled.
IPv4, NTP Client, Ondemand Governor.

Thanks BS!
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 74

PostPosted: Fri May 13, 2022 18:34    Post subject: Reply with quote
MLandi wrote:
Update method: SSH / CLI
Router/Version: Netgear R9000 Nighthawk X10
File/Kernel: 05/13/2022 - r48865(05/06/22)
Previous/Reset: DD-WRT v3.0-r48810 std / No
Mode/Status: Gateway / FAILED
Issues/Errors: CRITICAL ISSUE

After flashing, the R9000 would not finish the reboot. A factory reset did bring the router online with the new version. I tried to restore my settings backup from r48865 but on reboot the router hung. I factory reset again, flashed back to r48810 and restored my backup. All is normal now.

Either I had an unusual, unique issue updating or there is a problem with r48865 on the Netgear R9000.

BE CAREFUL WITH THIS UPDATE IF YOU HAVE A R9000


Thank you for the heads up. Will pass on this build.
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 5007
Location: UK, London, just across the river..

PostPosted: Fri May 13, 2022 21:07    Post subject: Reply with quote
RobrPatty if you read carefully MLandi post, you would find its a bad fash/setup, as unit is operational after reset...ill try this build soon, on Monday...probb other users will try it too...anyway...
Bad flash, no reboot could be due to bad settings, as well tons of other things...
If im not wrong, BS still uses/tests builds on R9000 too...unless he moved to another router... Rolling Eyes
At the end of the day MLandi did not provide any logs, setup announcements and ect. so not very useful flash/report..
I guess he has his own reasons..in fact R9000 has TFTP, so its brick resistant Razz

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 48646 WAP
TP-Link WR1043NDv2 -DD-WRT 48865 Gateway,DNS,AP Isolation,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -DD-WRT 48646 Gateway,DNS,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -Gargoyle OS 1.13.0b AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 48886 Gateway,DNS,AD-Block,AP&Net Isolation,VLAN's,Firewall,DoT,Vanilla
Netgear R9000 --DD-WRT 48646 Gateway,DNS,AD-Block,AP Isolation,Firewall,Forced DNS,DoT,2,4Ghz only,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 48886 Gateway,DNS,AD-Block,Firewall,Forced DNS,VLAN's,DoT,VPN
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 663

PostPosted: Fri May 13, 2022 21:22    Post subject: Reply with quote
Alozaros wrote:
RobrPatty if you read carefully MLandi post, you would find its a bad fash/setup, as unit is operational after reset...ill try this build soon, on Monday...probb other users will try it too...anyway...
Bad flash, no reboot could be due to bad settings, as well tons of other things...
If im not wrong, BS still uses/tests builds on R9000 too...unless he moved to another router... Rolling Eyes
At the end of the day MLandi did not provide any logs, setup announcements and ect. so not very useful flash/report..
I guess he has his own reasons..in fact R9000 has TFTP, so its brick resistant Razz


I had to recover quickly because I needed the router to work from home. I'll give it another try this weekend and see if I have issues. Logs would have been difficult because the router was not functional; nothing would connect. Again, I was in a hurry so I restored, made my report and got to work.

_________________
Netgear R9000 X10
DD-WRT v3.0-r48810 std (05/06/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
Vanilla Firmware, WiFi & Ethernet
2.4GHz: NG-Mixed, 10 + 6 (2457 MHz HT40), ACK Timing 450, WPA2 w/AES
5GHz: AC/N Mixed, 100 + 114 (5500 MHz VHT160), ACK Timing 450, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
MLandi
DD-WRT Guru


Joined: 04 Dec 2007
Posts: 663

PostPosted: Fri May 13, 2022 22:12    Post subject: Reply with quote
Alozaros wrote:
At the end of the day MLandi did not provide any logs, setup announcements and ect. so not very useful flash/report..


Do you know a way I can get log data from the router if it crashes? As for setup, my signature has a lot of detail and I do report that I update via the command line. I'd like to provide as much info as possible.

_________________
Netgear R9000 X10
DD-WRT v3.0-r48810 std (05/06/22)
Gateway, AP, DNSMasq, Clock 2000MHz
VAP on wlan1 for internet devices
IPv4 & IPv6 (Prefix Delegation)
Static Leases & DHCP
CloudFlare, QoS Disabled, SmartDNS Disabled
Vanilla Firmware, WiFi & Ethernet
2.4GHz: NG-Mixed, 10 + 6 (2457 MHz HT40), ACK Timing 450, WPA2 w/AES
5GHz: AC/N Mixed, 100 + 114 (5500 MHz VHT160), ACK Timing 450, WPA2 w/AES
Xfinity 1.2Gbps/42Mbps
RobrPatty
DD-WRT User


Joined: 06 Jun 2016
Posts: 74

PostPosted: Fri May 13, 2022 22:15    Post subject: R48865 Reply with quote
Netgear Nighthawk X10 R9000
Firmware Version DD-WRT v3.0-r48865 std (05/13/22)
Kernel Version Linux 4.9.312 #627 SMP Sun May 8 16:12:08 +07 2022 armv7l
Current Time Fri, 13 May 2022 16:09:48
Uptime 1 min
GUI over R48810
Reset: no
Issues: Upgrade flash went smooth, no problems

Thanks BS & Devs.

And appreciate the help Alozaros
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 5007
Location: UK, London, just across the river..

PostPosted: Fri May 13, 2022 22:29    Post subject: Reply with quote
MLandi wrote:
Alozaros wrote:
At the end of the day MLandi did not provide any logs, setup announcements and ect. so not very useful flash/report..


Do you know a way I can get log data from the router if it crashes? As for setup, my signature has a lot of detail and I do report that I update via the command line. I'd like to provide as much info as possible.


1. via remote log management - https://www.papertrail.com/
2. via "Visual Syslog server" free program, the one i used in the past
3. there was a script that saves backup of "cat /tmp/var/log/messages" at /opt or /jffs, via cron time commands by your choice, have a deep look at the forum

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 48646 WAP
TP-Link WR1043NDv2 -DD-WRT 48865 Gateway,DNS,AP Isolation,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -DD-WRT 48646 Gateway,DNS,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -Gargoyle OS 1.13.0b AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 48886 Gateway,DNS,AD-Block,AP&Net Isolation,VLAN's,Firewall,DoT,Vanilla
Netgear R9000 --DD-WRT 48646 Gateway,DNS,AD-Block,AP Isolation,Firewall,Forced DNS,DoT,2,4Ghz only,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 48886 Gateway,DNS,AD-Block,Firewall,Forced DNS,VLAN's,DoT,VPN
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5773
Location: Texas

PostPosted: Fri May 13, 2022 23:36    Post subject: Reply with quote
Linksys EA8500 ...main gateway
DD-WRT v3.0-r48865 std (05/13/22)
Linux 4.9.312 #946 SMP Fri May 13 01:18:12 +07 2022 armv7l
GUI install over r48839
all ok

#

Netgear WNDR3700 V4
DD-WRT v3.0-r48865 std (05/13/22)
Linux 3.18.140-d6 #142436 Fri May 13 08:59:38 +07 2022 mips
scp 'firmware.bin' to /tmp ... over r48839
all ok
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3872

PostPosted: Sat May 14, 2022 8:10    Post subject: Reply with quote
@MLandi a direct way of logging is with a TTL serial adapter, if you want greater chance of capturing a crash.

General advice, reboot before trying a reset. Cold boot aka hard boot: power off, wait some time, power on.
Goto page 1, 2, 3  Next Display posts from previous:    Page 1 of 3
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Atheros WiSOC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum