New Build - 05/06/2022 - r48810

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Goto page 1, 2  Next
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5650

PostPosted: Fri May 06, 2022 6:33    Post subject: New Build - 05/06/2022 - r48810 Reply with quote
Welcome to Broadcom r48810 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48786 (mirror)

OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • TP-Link Archer C8 v2, v3 support.
GLib mDNS/Avahi ZFS Zstd dnscrypt bootfail PHP mdadm Tor DoT Redirect SmartDNS FreeRADIUS htop rtw88 mt76 ath10k
In-kernel Samba (ksmbd 3.4.4++++): guest behavior selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
DNScrypt 1.95 can still be used in WebUI but v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
VAPs not working at boot are fixed, both unbridged (r40634) and bridged (r47822). Please test, remove startup commands.
If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
Broadcom ARM devices if 5 GHz channels are missing via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 5650

PostPosted: Fri May 06, 2022 6:56    Post subject: Reply with quote
r48810 is the third release since mac80211 overhaul, so an overview of changes in past few releases:

The first links are since last build. r48741SmartDNS dnsmasq ZFS mac80211 FRR GLib mDNS/Avahi

r48786mDNS/Avahi ZFS Zstd dnscrypt mt76 bootfail PHP mdadm Tor DoT Redirect SmartDNS rtw88
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 947

PostPosted: Fri May 06, 2022 7:30    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.302 #5801 SMP Wed May 4 21:19:28 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48786 std (05/03/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + USB Storage (by egc) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2024): https://rsseverything.com/feed/7d36ab68-7733-46c3-bd8a-9c54c5cef08c.xml
easyddup - A simple upgrade/downgrade utility by yoyoma2 --- as featured in 📌 Reference Links, stickies retired back to forum (Moderator's Pick 🌟)
twindragon6
DD-WRT User


Joined: 29 Jun 2008
Posts: 332

PostPosted: Fri May 06, 2022 11:59    Post subject: Netgear Nighthawk R7000 Reply with quote
Router/Version: Netgear R7000
Firmware: DD-WRT v3.0-r48810 std (05/06/22)
Kernel: Linux 4.4.302 #5801 SMP Wed May 4 21:19:28 +07 2022 armv7l
Mode: Gateway, Wireless AP, Static Leases. CTF & FA Enabled. NAT and QOS Off. All services off under Status>Sys-info.
Reset: Nope.
Previous: 05-03-2022-r48786
Status: Working very well so far; some GUI issues, still testing.
Temperatures: CPU 61.4 °C / WL0 51.1 °C / WL1 52.5 °C
Base CFE: Modified Asus ASUS RT-AC68P/ASUS RT-AC68U (C0 Model CFE V1.3.0.7) Configured as a stock R7000.



Speedtest-2.jpg
 Description:
Speedtest Over 5.8GHz Wireless.
 Filesize:  56.83 KB
 Viewed:  5579 Time(s)

Speedtest-2.jpg



GUI Error-1_600x435.jpg
 Description:
GUI Errors
 Filesize:  71.05 KB
 Viewed:  5578 Time(s)

GUI Error-1_600x435.jpg



Logs.txt
 Description:
Full system logs. MAC scrubbed, password scrubbed, the fun stuff at the bottom as usual!

nvram set console_debug=1

cat /var/log/messages (Initial Flash)
dmesg (Initial Flash)
cat /proc/cpuinfo
cat /tmp/dnsmasq.conf
cat /tmp/DNSCache.log
cat /tmp/unbound

Download
 Filename:  Logs.txt
 Filesize:  242.39 KB
 Downloaded:  104 Time(s)

mwchang
DD-WRT Guru


Joined: 26 Mar 2013
Posts: 1851
Location: Hung Hom, Hong Kong

PostPosted: Fri May 06, 2022 13:05    Post subject: DD-WRT BS build 48810 and Asus RT-N18U Reply with quote
Router/Version: Asus RT-N18U (rev. A1)
Firmware: DD-WRT v3.0-r48810 std (05/06/22)
Kernel: Linux 4.4.302 #5805 Fri May 6 04:01:08 +07 2022 armv7l
Previous: DD-WRT v3.0-r48741 std (04/26/22)
Mode: WAN @ DHCP, Wireless @ AP
Status: Working (
Not 24/7; Not using IPv6, VAP, VPN, CTF, FA;
DDNS OK; Port-forwarding OK;
Using NAS (ksmbd, minidlna, lighttpd), USB (jffs, opt), Recursive DNS Unbound;
Entware core (CPU: armv71) installed without problem
)
Reset: NO reset during firmware upgrade but cold boot
File: https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2022/05-06-2022-r48810/asus-rt-n18u/

Summary

First re-boot after firmware upgrade, everything was working fine.

Pending cold boot....

Update: everything was working after cold boot.

Problem

USB script executed twice!!
Code:
grep -i -E 'changmw' /var/log/messages

May  6 20:55:25 RT-N18U-HST user.notice root: changmw: starting rc_usb
May  6 20:55:25 RT-N18U-HST user.notice root: 0: changmw waiting for init for 5 seconds
May  6 20:55:25 RT-N18U-HST user.notice root: changmw: rc_usb already started
May  6 20:55:30 RT-N18U-HST user.notice root: 1: changmw waiting for init for 5 seconds
May  6 20:55:36 RT-N18U-HST user.notice root: 2: changmw waiting for init for 5 seconds
May  6 20:55:41 RT-N18U-HST user.notice root: 3: changmw waiting for init for 5 seconds
May  6 20:55:46 RT-N18U-HST user.notice root: 4: changmw re-starting unbound
May  6 20:55:47 RT-N18U-HST user.notice root: 4: changmw re-starting minidlna
May  6 20:55:48 RT-N18U-HST user.notice root: 4: changmw exiting rc_usb

I added logic to prevent 2nd execution of my USB script, by scanning the log. Using ps command should be a better approach. Note that users can always turn off both syslogd and klogd.
Code:
#!/bin/sh
#
# Saved USB script is /tmp/.rc_usb
#
# ps | grep -E 'bound|dlna|smb'
#

is-mounted.sh

xx=`grep rc_usb /var/log/messages`
if [[ ! -z "$xx" ]] ; then
   logger "changmw: rc_usb already started"
   exit 1
fi

logger "changmw: starting rc_usb"
....

Today I think I captured what happened when DD-WRT started the USB script after cold boot:

Code:
ps | grep usb

 2583 root     [usb-storage]
 3077 root     startservice run_rc_usb -f
 3080 root     /sbin/service run_rc_usb start -f
 3087 root     {.rc_usb} /bin/sh /tmp/.rc_usb blockdev_add /opt


Firmware Size

From 30515200 (b.31277) to 24711168 (b.33555) = -5804032 bytes
From 24711168 (b.33555) to 27054080 (b.34929) = 2342912 bytes
From 27054080 (b.34929) to 26640384 (b.35531) = -413696 bytes
From 26640384 (b.35531) to 25022464 (b.36995) = -1617920 bytes
From 25022464 (b.36995) to 25427968 (b.37961) = 405504 bytes
.... <snipped> ....
From 25870336 (b.46733) to 25153536 (b.46979) = -716800 bytes
From 25153536 (b.46979) to 25145344 (b.47000) = -8192 bytes
From 25145344 (b.47000) to 25145344 (b.47090) = 0 bytes
From 25145344 (b.47090) to 25149440 (b.47206) = 4096 bytes
From 25149440 (b.47206) to 25153536 (b.47282) = 4096 bytes
From 25153536 (b.47282) to 25128960 (b.47474) = -24576 bytes
From 25128960 (b.47474) to 25128960 (b.47581) = 0 bytes
From 25128960 (b.47581) to 25157632 (b.47692) = 28672 bytes
From 25157632 (b.47692) to 25939968 (b.47822) = 782336 bytes
From 25939968 (b.47822) to 25985024 (b.48081) = 45056 bytes
From 25985024 (b.48081) to 26087424 (b.48432) = 102400 bytes
From 26087424 (b.48432) to 26476544 (b.48741) = 389120 bytes
From 26476544 (b.48741) to 26324992 (b.48841) = -151552 bytes

blkt wrote:
r48810 is the third release since mac80211 overhaul, so an overview of changes in past few releases:

Good notice....


_________________
Router: Asus RT-N18U (rev. A1)

Drink, Blink, Stretch! Live long and prosper! May the Force and farces be with you!

Facebook: https://www.facebook.com/changmanwai
Website: https://sites.google.com/site/changmw
SETI@Home profile: http://setiathome.berkeley.edu/view_profile.php?userid=211832
GitHub: https://github.com/changmw/changmw


Last edited by mwchang on Sun May 08, 2022 12:47; edited 3 times in total
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12812
Location: Netherlands

PostPosted: Fri May 06, 2022 13:37    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r48810M Community Build (05/06/22)
Kernel Version: Linux 4.4.302 #1 SMP Fri May 6 08:58:03 CEST 2022 armv7l

Upgraded from: DD-WRT v3.0-r48786M Community Build (05/03/22)
Reset: No not this time

Status: Up and running for 4 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, 2.4 GHz with unbridged VAP and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.
OpenVPN client tested and working

Errors: Nothing encountered yet.

Big Thanks to BS and other forum members and developers.

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
angler
DD-WRT User


Joined: 10 Feb 2012
Posts: 113

PostPosted: Sat May 07, 2022 12:39    Post subject: Reply with quote
Router/Version: Trendnet TEW-811DRU / DD-WRT v3.0-r48810 mini (05/06/22)
File/Kernel: trendnet-811dru-webflash.bin / Linux 4.4.302 #5804 Fri May 6 03:57:27 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48786 mini (05/03/22) / no
Mode/Status: Client AP/ Booted clean, CPU 82.5 °C / WL0 57.0 °C / WL1 61.5 °C
temps seem bit higher than prev, UI ok - stable so far
Issues/Errors: none yet, thx devs


Last edited by angler on Tue May 17, 2022 22:03; edited 1 time in total
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 228

PostPosted: Sat May 07, 2022 22:33    Post subject: Reply with quote
Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r48810 std (05/06/22)
Kernel Version: Linux 4.4.302 #5801 SMP Wed May 4 21:19:28 +07 2022 armv7l
Temperatures: CPU 69.7 °C / WL1 55.2 °C
Current Time: Sat, 07 May 2022 15:30:47
Uptime: 21:46
Reset: No
GUI install over 48786
Installed using Brave browser over wireless
No issues

Thank you BS and thanks you gurus for your guides and wisdom

_________________
Netgear XR500 - Gateway
R6700 v3 - Station Bridge
MysticGold04
DD-WRT User


Joined: 20 Apr 2018
Posts: 174
Location: Somewhere remote

PostPosted: Sun May 08, 2022 18:30    Post subject: Reply with quote
I tried to upgrade my WRT54GL from a February build and when the router rebooted, r48494 from 3/15/22 showed as the installed version.

I used the Broadcom generic mini bin file.

I have not tried resetting yet…this also happened to someone upgrading their
WRT54GL in a prior thread.

https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=332038

_________________
ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7
kernel-panic69
DD-WRT Guru


Joined: 08 May 2018
Posts: 14102
Location: Texas, USA

PostPosted: Sun May 08, 2022 21:17    Post subject: Reply with quote
Did you try flashing via CLI, or was this strictly via webUI?
_________________
"Life is but a fleeting moment, a vapor that vanishes quickly; All is vanity"
Contribute To DD-WRT
Pogo - A minimal level of ability is expected and needed...
DD-WRT Releases 2023 (PolitePol)
DD-WRT Releases 2023 (RSS Everything)

----------------------
Linux User #377467 counter.li.org / linuxcounter.net
MysticGold04
DD-WRT User


Joined: 20 Apr 2018
Posts: 174
Location: Somewhere remote

PostPosted: Sun May 08, 2022 22:38    Post subject: Reply with quote
kernel-panic69 wrote:
Did you try flashing via CLI, or was this strictly via webUI?


Nope, gui only. I’ll try cli when I get a chance…

_________________
ASUS RT-AC3100 AP Merlin 386.12_4
ASUS RT-AC68U Media Bridge/Merlin 386.12_4 (x2)
ASUS RT-AC68U AP r54604
ASUS RT-AC68U Gateway/AP r54604
Edgerouter-4, v2.0.9-hotfix7


Last edited by MysticGold04 on Thu May 12, 2022 16:52; edited 4 times in total
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 12812
Location: Netherlands

PostPosted: Mon May 09, 2022 11:45    Post subject: Reply with quote
Router Model: Linksys E2000 (converted N320)

Firmware Version: DD-WRT v3.0-r48810 mega (05/06/22)
Kernel Version: Linux 4.4.302 #15626 Fri May 6 05:03:14 +07 2022 mips

Upgraded: from DD-WRT v3.0-r48141 mega (01/21/22)
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, OpenVPN client (tun) (on Keepsolid) up and running, VPN download (speed 5 Mb/s), Wifi 2,4GHz working.
WireGuard client working one tunnel in fail over group to Mullvad, one tunnel as site-to-site setup to remote VPS

Some simple speed testing (timed file up and downloading)
Without SFE: 40 /40 Mb/s, U/D
With SFE: 170/170 Mb/s U/D
With CTF: 260/320 Mb/s U/D

Errors: No, Seems like a good build,

Big Thanks to the devs!!

_________________
Routers:Netgear R7000, R6400v1, R6400v2, EA6900 (XvortexCFE), E2000, E1200v1, WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
hurleyp
DD-WRT User


Joined: 10 Sep 2009
Posts: 425
Location: Ottawa, Ontario, Canada

PostPosted: Mon May 09, 2022 12:03    Post subject: Reply with quote
Firmware: v3.0-r48810 std (05/06/22)
Router/Version: Netgear R7000
Kernel: Linux 4.4.302 #5801 SMP Wed May 4 21:19:28 +07 2022 armv7l
Previous: v3.0-r48786 std (05/03/22)
Mode/Status: AP wired and wireless / Up and running for 2 days
Reset: Soft boot before and after upgrade
Temperatures: CPU 59.1 °C / WL0 45.6 °C / WL1 50.8 °C
Issues/Errors: Nothing significant

Updated via webif. No 'nvram erase' this time, last one was in July 2018 (r36325).

Upload and Download speeds are to ISP spec (500/500 Mbps).

Current basic R7000 setup (subject to change of course):
- Static WAN IP
- Shortcut Forwarding Engine: CTF, Flow Acceleration: Disabled
- STP - Enabled
- IPv4 only, both WAN and LAN
- LAN DHCP Enabled
- Not currently forwarding any ports
- Wireless: AP, Regulatory Domain = CANADA, wl0 Mixed (ch. 6), wl1 AC/N-Mixed (ch. 36, VHT80), AES
- 1 wireless VLAN on wl0
- SNMP disabled, SSH enabled, Telnet disabled
- Firewall enabled, Log Level high
- Syslog: to local server. klogd: disabled.
- USB support - Off
- No custom scripts
- No: ttraf, Tor, VNC, Zabbix, VPN, Radius, OpenVPN
- No: UPnP, DMZ, QoS
- No: Samba, CIFS, JFFS2, miniDLNA, Entware, Optware

_________________
Netgear R7000: v3.0-r54248 std (11/29/23)
EdgeRouter-X: EdgeOS v2.0.9-hotfix 7
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 289
Location: Maryland, United States

PostPosted: Wed May 11, 2022 1:13    Post subject: Reply with quote
Router/Version: Netgear R6300v1
Firmware Version: DD-WRT v3.0-r48810 giga (05/06/22)
Kernel Version: Linux 4.4.302 #15610 Fri May 6 04:36:36 +07 2022 mips
Previous/Reset: r48741 No reset
Mode/Status: Gateway / Working
Issues/Errors: None


Last edited by PaulGo on Mon May 16, 2022 16:19; edited 1 time in total
the-joker
DD-WRT Developer/Maintainer


Joined: 31 Jul 2021
Posts: 2146
Location: All over YOUR webs

PostPosted: Wed May 11, 2022 11:20    Post subject: Reply with quote
re: DD-WRT v3.0-r48810 std (05/11/22) My RT-AC68U E1 seems happy with it, except for the great deal of other log noise that is quite annoying and repetitive.
Code:
Jan 1 01:00:14 Nexus daemon.info dnsmasq[1051]: using only locally-known addresses for test
Jan 1 01:00:14 router daemon.info dnsmasq[1051]: using only locally-known addresses for onion
Jan 1 01:00:14 router daemon.info dnsmasq[1051]: using only locally-known addresses for localhost
Jan 1 01:00:14 router daemon.info dnsmasq[1051]: using only locally-known addresses for local
Jan 1 01:00:14 router daemon.info dnsmasq[1051]: using only locally-known addresses for invalid
Jan 1 01:00:14 router daemon.info dnsmasq[1051]: using only locally-known addresses for bind

That repeats a lot in various places.

Those entries are for dnsmasq are quite annoying since my guess is due to services restarting it rinses and repeats, but since Im not changing any settings and my NTP only updates once a week and maybe because my brain is a bit numb at the moment, I cant understand whats causing all those services to restart every so often.

The only connection is SFE, but idk why again why the services restart if nothing changed.

---------------------

[transfer from atheros initial post] Other issues are, DHCP Clients table in Info.htm or Status_Lan.asp do not show all my LAN up and running accessible LAN clients which have static IP's assigned, only shows my main dev PC.
Its missing at least 3 machines on the client list all with assigned static leases and all accessible on network.

Even at v3.0-r48839 its still the same. Only the PC shows up at xxx.xxx.x.2 and its missing xxx.xxx.x.8 xxx.xxx.x.9 and xxx.xxx.x.10

I cannot remember the last build where they all showed.

It was reminded that the machines have likely not requested anything from DHCP since they use to be clients that I would turn on every day and off every night and now they are ON 24/7 and the static leases dont expire, so numb brain dead moment, I think I will either set lease expiry or ignore it.

_________________
Saving your retinas from the burn!🔥
DD-WRT Inspired themes for routers
DD-WRT Inspired themes for the phpBB Forum
DD-WRT Inspired themes for the SVN Trac & FTP site
Join in for a chat @ #style_it_themes_public:matrix.org or #style_it_themes:discord

DD-WRT UI Themes Bug Reporting and Discussion thread

Router: ANus RT-AC68U E1 (recognized as C1)
Goto page 1, 2  Next Display posts from previous:    Page 1 of 2
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum