New Build - 05/03/2022 - r48786

Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware
Author Message
Alozaros
DD-WRT Guru


Joined: 16 Nov 2015
Posts: 5180
Location: UK, London, just across the river..

PostPosted: Tue May 03, 2022 12:35    Post subject: New Build - 05/03/2022 - r48786 Reply with quote
Welcome to Broadcom r48786 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48741 (mirror)

OpenVPN 2.5.6: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • TP-Link Archer C8 v2, v3 support.
dnsmasq mac80211 FRR GLib mDNS/Avahi ZFS Zstd dnscrypt mt76 bootfail PHP mdadm Tor DoT Redirect SmartDNS rtw88
In-kernel Samba (ksmbd 3.4.4+++): guest behavior is selectable. • WSD updateANTFS/NTFS3 kernel mode driver++++
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, UI theme test bug hunt thread.
Add static, delete DHCP lease from Status -> LAN clients table, Services, upgrades to forwarding in NAT / QoS tabs & more.
Let's Enhance: DTAG, Tagging, Switch Config, Dynamic WDS, Stations, Site Survey, RadioName, 802.11r and recent changes.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
DNScrypt 1.95 can still be used in WebUI but v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
VAPs not working at boot are fixed, both unbridged (r40634) and bridged (r47822). Please test, remove startup commands.
If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
Broadcom ARM devices if 5 GHz channels are missing via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs, logs: syslog klog 'dmesg' 'cat /tmp/var/log/messages' nvram set console_debug=1, serial.
• Firewall NAT: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' & 'cat /tmp/.ipt'. Misc: strace tcpdump wireshark.
• Gremlins: reboot. cold boot. Reset & reconfigure not restore backup. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]

_________________
Atheros
TP-Link WR740Nv1 ---DD-WRT 49599 WAP
TP-Link WR1043NDv2 -DD-WRT 49599 Gateway,DNS,AP Isolation,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -DD-WRT 49599 Gateway,DNS,Ad-Block,Firewall,Forced DNS,DoT,VPN,VLAN
TP-Link WR1043NDv2 -Gargoyle OS 1.13.0b AP,DNS,QoS,Quotas
Qualcomm-Atheros
Netgear R7800 --DD-WRT 49626 Gateway,DNS,AD-Block,AP&Net Isolation,VLAN's,Firewall,DoT,Vanilla
Netgear R9000 --DD-WRT 49599 Gateway,DNS,AD-Block,AP Isolation,Firewall,Forced DNS,DoT,2,4Ghz only,Vanilla
Broadcom
Netgear R7000 ---DD-WRT 49626 Gateway,DNS,AD-Block,Firewall,Forced DNS,VLAN's,DoT,VPN
NOT USING 5Ghz ANYWHERE
------------------------------------------------------
Stubby for DNS over TLS I DNSCrypt v2 by mac913


Last edited by Alozaros on Fri May 06, 2022 11:21; edited 1 time in total
Sponsor
IONK
DD-WRT Guru


Joined: 19 Aug 2011
Posts: 561

PostPosted: Tue May 03, 2022 12:42    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.302 #5785 SMP Mon May 2 03:58:11 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48741 std (04/26/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + CTF & FA + USB Storage (by egc) + DDNS (Dynu)
+ Cron / working
Issues/Errors: none

o blkt, where art thou?

_________________
▫ RSS feed for DD-WRT releases (2022): https://politepol.com/fd/BU5UpNmf6NRW
easyddup - A simple upgrade/downgrade utility by yoyoma2
AndyOxon
DD-WRT User


Joined: 16 Aug 2021
Posts: 81
Location: Oxford, UK.

PostPosted: Tue May 03, 2022 14:31    Post subject: 2G WiFi issues Reply with quote
Router/Version: Netgear WNDR4500 / v2
File/Kernel: dd-wrt.v24-48786_NEWD-2_K3.x_giga-WNDR4500V2.bin / 4.4.302 #15578 Tue May 3 05:54:21 +07 2022 mips
Previous/Reset: r48741 / YES (and manually configured)
Mode/Status: Router, 2x WDS-AP, STP, Samba, Torrent Client, Entware / Working with useless WAN port.
Issues/Errors: Assigning WAN to VLAN1 causes 2G WiFi connection issues, as previously reported.

Steps: Flashed this build via web UI with settings reset option > manually set basic/required network config (router IP, gateway IP, DNS IP, disabled WAN connection type, turned off DHCP, op-mode=router, disabled DNSMasq, disabled firewall) > tested 2G WiFi, which worked as expected > Assigned WAN to VLAN1 on Switch Config page > tested 2G WiFi again, which had stopped working > restored settings from previous/last build > Working with useless WAN port.

Please feel free to PM me with the words “You numbnuts!” if I’ve overlooked something. Thanks.

_________________
Hardware (Device/Firmware/Roles):
Netgear RAX50 | Stock | Gateway, DHCP, AP, NAS.
Netgear WNDR4500v2 | FreshTomato | Router, WAP (2G), WDS-AP (5G), Samba, Torrent Client.
Netgear WNDR4500v2 | FreshTomato | Router, WAP (2G), WDS-AP (5G).
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10056
Location: Netherlands

PostPosted: Tue May 03, 2022 14:52    Post subject: Reply with quote
I actually tried it on an R6400 which I wanted to use as a WAP, and it gave weird errors.

A WAN port is automatically assigned to the switch by just setting VLAN2 to br0 and that works but if you try it directly on the switch (which seems the most logical/best way) it does not work.
Not sure if this is an inherent problem of the switch design (but this could well be the case) or some setup problem.

It is on my (long) list to research but perhaps do not try it and if the WAN port is not automatically set to the switch perhaps try to set VLAN2 to br0 ?

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
AndyOxon
DD-WRT User


Joined: 16 Aug 2021
Posts: 81
Location: Oxford, UK.

PostPosted: Tue May 03, 2022 15:32    Post subject: New thread Reply with quote
I should have created a new thread first, sorry: https://forum.dd-wrt.com/phpBB2/viewtopic.php?p=1261937#1261937
_________________
Hardware (Device/Firmware/Roles):
Netgear RAX50 | Stock | Gateway, DHCP, AP, NAS.
Netgear WNDR4500v2 | FreshTomato | Router, WAP (2G), WDS-AP (5G), Samba, Torrent Client.
Netgear WNDR4500v2 | FreshTomato | Router, WAP (2G), WDS-AP (5G).
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 10056
Location: Netherlands

PostPosted: Tue May 03, 2022 15:46    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r48786M Community Build (05/03/22)
Kernel Version: Linux 4.4.302 #1 SMP Tue May 3 16:29:43 CEST 2022 armv7l

Upgraded from: DD-WRT v3.0-r48646M Community Build
Reset: No not this time

Status: Up and running for 2 hours, basic setup as Gateway, static leases, Advanced routing, Port Forwarding, IPv4, 2.4 GHz with unbridged VAP and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.
OpenVPN client tested and working

Errors: Nothing encountered yet.

Big Thanks to BS and other forum members and developers.

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
PaulGo
DD-WRT User


Joined: 01 Dec 2021
Posts: 154
Location: Maryland, United States

PostPosted: Wed May 04, 2022 2:07    Post subject: Reply with quote
Router/Version: Netgear R6300v1
Firmware Version: DD-WRT v3.0-r48786 giga (05/03/22)
Kernel Version: Linux 4.4.302 #15578 Tue May 3 05:54:21 +07 2022 mips
Previous/Reset:
r48741 No reset
Mode/Status: Gateway / Working
Issues/Errors: None


Last edited by PaulGo on Mon May 16, 2022 16:16; edited 1 time in total
KACTET
DD-WRT Novice


Joined: 01 May 2022
Posts: 11

PostPosted: Wed May 04, 2022 7:14    Post subject: broken file Reply with quote
Router/Version: Linksys WRT54GL v1.1
File/Kernel: r48494 / Linux 2.4.37 #68327 Tue Mar 15 03:00:22 +07 2022 mips
Previous/Reset: r48494 / Yes
Mode/Status: Gateway / Working
Issues/Errors: Yes

Updating the router to version r48786. For some reason, r48494 is being installed. Previous r48646, r48741 same failure. Most likely the new version has not been uploaded to the site or something else Neutral
mac913
DD-WRT Guru


Joined: 02 May 2008
Posts: 1737
Location: Canada

PostPosted: Wed May 04, 2022 14:05    Post subject: Reply with quote
HOME Wired Multicast ISP 4K TV Network

Router/Version: R7000
File/Kernel: DD-WRT v3.0-r48786 std (05/03/22)
Kernel Version: Linux 4.4.302 #5785 SMP Mon May 2 03:58:11 +07 2022 armv7l
Previous/Reset: r48741 / No Reset, CLI Update
Mode/Status: GW / Working Well
Issues/Errors: none / none
Services Used: Multicast,IGMP,SFE=CTF,SSH,Syslog
Services Disabled: FA,WiFi,QoS,ttraff,Telnet,NAS,Samba

Running over 16 hours.


OffSite #1

Router/Version: R7000
File/Kernel: DD-WRT v3.0-r48786 std (05/03/22)
Kernel Version: Linux 4.4.302 #5785 SMP Mon May 2 03:58:11 +07 2022 armv7l
Previous/Reset: r48741 / No Reset, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none / none
Services Used: DHCP WAN,IPv6-6to4,SFE=CTF,NTP,WG Client,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6

Running over 12 hours.


OffSite #2

Router/Version: R7000
File/Kernel: DD-WRT v3.0-r48786 std (05/03/22)
Kernel Version: Linux 4.4.302 #5785 SMP Mon May 2 03:58:11 +07 2022 armv7l
Previous/Reset: r48741 / No Reset, Remote CLI Update
Mode/Status: GW & AP / Working Well
Issues/Errors: none /none
Services Used: DHCP WAN,IPv6-PD,SFE=CTF,NTP,VLANx,BRx,SSH,Syslog,Cron,USB Storage,Entware DNSCrypt v2.1.1
Services Disabled: QoS,ttraff,Telnet,NAS.Samba,YAMon3.4.6

Running over 13 hours.


Thank-you BrianSlyer for your Great Work and everyone else who makes DD-WRT Great on the Forum!

_________________
Home Network on Telus 1Gb PureFibre - 10GbE Copper Backbone
2x R7800 - Gateway & WiFi & 3xWireGuard - DDWRT r49626 Std
R7000 - Wired ISP 4K IPTV Gateway - DDWRT r49626 Std

Off Site 1

R7000 - Gateway & WiFi & WireGuard - DDWRT r49626 Std
E3000 - Client Bridge - DDWRT r49626 Mega K4.4

Off Site 2

R7000 - Gateway & WiFi - DDWRT r49626 Std
E2000 - Wired ISP IPTV PVR Blocker - DDWRT r35531


YAMon 3.4.6 | DNSCrypt-Proxy V2
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 114

PostPosted: Thu May 05, 2022 0:20    Post subject: Reply with quote
Netgear R6700 v3 – Client Bridge
Firmware Version: DD-WRT v3.0-r48786 std (05/03/22)
Kernel Version: Linux 4.4.302 #5785 SMP Mon May 2 03:58:11 +07 2022 armv7l
Temperatures: CPU 71.4 °C / WL1 55.5 °C
Current Time: Wed, 04 May 2022 17:16:55
Uptime: 23:35
Reset: No
GUI install over 48741
Installed using Brave browser over wireless
No issues

Thank you BS and thanks you gurus for your guides and wisdom

_________________
Netgear XR500 - Gateway
R6700 v3 - Client Bridge
Bitflip
DD-WRT Novice


Joined: 19 Feb 2018
Posts: 4
Location: Rocky Mountains

PostPosted: Thu May 05, 2022 3:10    Post subject: r48786 std Dlink-DIR880L Reply with quote
Router/Version: DIR-880L/A1

File/Kernel: dir880-webflash.bin/Linux 4.4.302 #5785 SMP Mon May 2 03:58:11 +07 2022 armv7l
Previous/Reset: r48425/No, but did power cycle prior to upgrade
Mode/Status: Gateway/wireless 2.4,5 and Gb ether, local DHCP based DNS

Issues/Errors: none noted so far

Very similar line speed to r48425. Will continue to test.

Thank you BS and the rest of the crew for another stable release.
angler
DD-WRT User


Joined: 10 Feb 2012
Posts: 109

PostPosted: Thu May 05, 2022 7:19    Post subject: Reply with quote
Router/Version: DD-WRT v3.0-r48786 mini (05/03/22)
File/Kernel: trendnet-811dru-webflash.bin / Linux 4.4.302 #5788 Tue May 3 05:21:48 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48646 mini (04/12/22) / no
Mode/Status: Client AP/ Booted clean, CPU 80.8 °C / WL0 54.2 °C / WL1 57.8 °C
Issues/Errors: none yet, temps a bit lower than prev, UI ok, thx devs - stable so far
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 187

PostPosted: Thu May 05, 2022 19:37    Post subject: Reply with quote
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r48786 std (05/03/22)
Kernel Version: Linux 4.4.302 #5791 SMP Tue May 3 05:45:04 +07 2022 armv7l
Reset: no
Operating Mode/Setup: Gateway / AP Unbound JFFS2
Status: running well. thanks BS and dd-wrt community
wabe
DD-WRT Guru


Joined: 17 Jun 2006
Posts: 833

PostPosted: Thu May 05, 2022 20:20    Post subject: Reply with quote
Router Model: Asus RT-AC68U rev A1 & C1
Firmware Version: DD-WRT v3.0-r48786 std (05/03/22)
Kernel Version: Linux 4.4.302 #5791 SMP Tue May 3 05:45:04 +07 2022 armv7l
Reset: no
Operating Mode/Setup: Gateway / AP
Status: running well.

_________________
Netgear R7000 on Build 49361
Asus AC-AC68U rev. C1 on Build 48786
Asus AC-68U rev. A1 on Build 49361
Asus AC-68U rev. A1 on Build 48786
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum