Newbie on this Forum, and I really do hope that someone will jump in and assist me.
Goal:
Setup a dual or triple WAN failover.
I need help with:
- Need help particularly in entering the commands as stated in the reference guide.
- Commands to set VLANs: I am not sure what to use what numbers to use. I need to set the WAN port and the LAN Port No. 1 as dual wan failover ports.
- Setting up the scripts: I am not sure how to create the script and name them as; wan2up.startup, wan1.up, wan2.up, failover.startup, chwan.sesbutton
- Under "Final polishing": Create above files in /jffs/etc/config and then do a "chmod +x /jffs/etc/config/* " - how to I create it? I know basic linux command and tried to telnet, but cd command did not work for me.
- Under "Commands to set VLANs": I copy/pasted the nvram commands in administration > commands , how would I know if it worked?
Joined: 18 Mar 2014 Posts: 12917 Location: Netherlands
Posted: Sat Apr 30, 2022 10:04 Post subject:
The wiki assumes you have permanent storage.
As you do not have USB, you need JFFS2, which can be enabled on Administration page, but it is only present in routers/builds with sufficient flash RAM.
You are using a micro build and I doubt it is present in those builds.
I think you router can handle mini builds (4 MB) maybe, just maybe those have JFFS2.
