New Build - 01/28/2022 - r48218

Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware
Author Message
blkt
DD-WRT Guru


Joined: 20 Jan 2019
Posts: 3910

PostPosted: Fri Jan 28, 2022 4:30    Post subject: New Build - 01/28/2022 - r48218 Reply with quote
Welcome to Broadcom r48218 beta release thread for reporting, feedback to developers & community benefit.
Please do not flash builds until installation is understood, risks involved and device specific recovery methods.
Avoid discussions, create threads for questions, general problems or use search; this thread is not for support.
Please list router model & revision, operating & wireless mode(s) and exact filename/firmware image flashed.


Downloads: HTTPS, FTP

CLI Flash: 'cd /tmp' then 'wget {file URL}' (http only) or 'curl -O {file URL}' (http, https, ftp). 'write {file} linux' then 'reboot'.

Trac SVN: repository since last build r48208 (mirror)

OpenVPN 2.5.5: Changelog, Guides, Server, PBR, DNS, Kill Switch, Watchdog, Reverse PBR, Client, Multiple, tips & scripts.
WireGuard 1.0.20211208/Tools: Changelog, Guides, Client, Server, Advanced, PBR, KS, tips & scripts. Thanks to BS & egc!

Notes:
Experimental for 8MB+ K2.x devices: broadcom_K3X_mipsel32r1. • MIPS @ kernel 4.4. • TP-Link Archer C8 v2, v3 support.
Privoxy, iperf3, CAKE, Asterisk, SmartDNS, curl, ProFTPD, BusyBox, OpenSSL, mac80211, FreeRADIUS, dnsmasq, Unbound, zfs, SoftEther, Squid, zstd, Tor
In-kernel Samba (ksmbd 3.4.4): guest behavior is now selectable. • WSD update ANTFS/NTFS3 kernel mode driver++++
CVE-2020-26147, CVE-2020-24586, CVE-2020-24587 & CVE-2020-24588 fragattack fixed. • Broadcom swconfig supported.
• 'Assign WAN port to Switch' gone, set Connection Type Disabled. • WebUI MAC Filtering (47184-47205). • Sputnik removed.
• 'Ignore WAN DNS' also ignores WAN domain. • Milkfish removed.
New DD-WRT inspired themes conversion by the-joker & BrainSlayer, micro builds excluded, see UI theme test info thread.
• 401 bad request: Ethernet WebUI -> Wireless -> Basic Settings -> Advanced Settings -> Wireless GUI Access Enable, Save
Add static or delete DHCP lease from clients table in Status -> LAN. Upgrades to forwarding delete, NAT / QoS tabs & more.
Recent features, enhancements, fixes: Dynamic WDS, Stations, Site Survey, Radioname, Switch Config, Tagging and DTAG.

Issues, observations, and/or workarounds reported:
WebUI: Clear history or use a portable. Temporary cache bypass: Ctrl+F5, Cmd+Shift+R or new private window/incognito.
DNScrypt 1.95 can still be used in WebUI but v2 (not compatible) requires Golang and thus Entware. See Trac ticket #6246.
WDS does not work on Broadcom ARM devices (only MIPS<->MIPS) & bridge modes on k4.4 devices may sometimes work
in some configurations for certain builds but are not supported by the bcmdhd driver. Try client or repeater modes, but YMMV.
VAPs not working at boot are fixed, both unbridged (r40634) and bridged (r47822). Please test, remove startup commands.
If startup scripts do not work from USB add delay (wait script), sleep 25 or try Administration -> Commands -> Save USB.
Broadcom ARM devices if 5 GHz channels are missing via Telnet/SSH: 'nvram set brcm_unlock=1' 'nvram commit' 'reboot'.
Please report findings with steps needed to reproduce, configuration, clients, output, logs and important information below!

Important:
Detail issues & relevant configs. Logs: 'dmesg' 'cat /tmp/var/log/messages' syslog klog, serial, strace, tcpdump, wireshark.
• Any firewall NAT or WAN issues, show output: 'iptables -vnL' 'iptables -t nat -vnL' 'iptables -t mangle -vnL' and /tmp/.ipt file.
• Gremlins: reset & configure manually, not restore a backup. Reboot. Search Trac & discuss in forum before opening tickets.
• Include operating & wireless modes (e.g. Gateway, Router, AP, CB, WDS, Mesh) and applicable configurations to reproduce.

Example Template:
Code:
[b]Router/Version: [/b]
[b]File/Kernel: [/b]
[b]Previous/Reset: [/b]
[b]Mode/Status: [/b]
[b]Issues/Errors: [/b]
Sponsor
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 9611
Location: Netherlands

PostPosted: Fri Jan 28, 2022 11:44    Post subject: Reply with quote
Router Model: Netgear R6400v1

Firmware Version: DD-WRT v3.0-r48218M Community Build (01/27/22)
Kernel Version: Linux 4.4.300 #1 SMP Thu Jan 27 16:36:45 CET 2022 armv7l

Upgraded from: DD-WRT v3.0-r48138M Community Build
Reset: No not this time

Status: Up and running for 16 hours, basic setup as Gateway, static leases, IPv4, 2.4 GHz with unbridged VAP and 5 GHz.
Running one WireGuard tunnel to Keepsolid and second WireGuard tunnel to own WG server for site-to-site connection.
OpenVPN client tested and working
Disabled "Query DNs in strict order"

Big Thanks to BS and other forum members and developers.

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
egc
DD-WRT Guru


Joined: 18 Mar 2014
Posts: 9611
Location: Netherlands

PostPosted: Fri Jan 28, 2022 11:49    Post subject: Reply with quote
Router Model: Netgear R6400v2, board_id: U12H332T

Firmware Version: DD-WRT v3.0-r48218M Community Build (01/27/22)
Kernel Version: Linux 4.4.300 #1 SMP Thu Jan 27 16:36:45 CET 2022 armv7l

Upgraded from: DD-WRT v3.0-r48138M Community Build
Reset: No not this time

Status: Up and running for 16 hours, basic setup as Gateway, static leases, 2,4GHz and 5Ghz working, USB storage NAS working.
OpenVPN server working.
WireGuard server working with 8 clients (phones , windows and two other routers for site-to-site setup).

Errors: None

Thanks BS and other developers!

_________________
Routers:Netgear R7800, R6400v1, R6400v2, Linksys EA8500, EA6900 (XvortexCFE), E2000 (converted WRT320N), WRT54GS v1.
Install guide R6400v2, R6700v3,XR300:https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=316399
Install guide R7800/XR500: https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=320614
Forum Guide Lines (important read):https://forum.dd-wrt.com/phpBB2/viewtopic.php?t=324087
PeteSL
DD-WRT User


Joined: 01 May 2007
Posts: 85

PostPosted: Fri Jan 28, 2022 12:02    Post subject: Reply with quote
Router/Version: Asus AC-3100
File/Kernel: asus_rt-ac3100-firmware.trx(Experimental)/Linux 4.4.299 #5036 SMP Fri Jan 21 04:34:03 +07 2022 armv7l
Previous/Reset: r48141/no
Mode/Status: NAT/SFE/uPNP/no DHCP,DNS/Wireguard client
Issues/Errors:
Installed 48218 (experimental) with no errors. However, there was no WiFi transmission (2.4 GHz or 5 GHz) even though the status page showed radios working normally (but no connections, of course) and Syslog showed no errors. Did standard reboot with no change. Reverted back to r48141 and all working well.
IONK
DD-WRT User


Joined: 19 Aug 2011
Posts: 485

PostPosted: Fri Jan 28, 2022 15:00    Post subject: Reply with quote
Router/Version: D-Link DIR-868L Rev.A1
File/Kernel: dir868a-webflash.bin / Linux 4.4.300 #5085 SMP Thu Jan 27 19:03:20 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48208 std (01/26/22) / no
Mode/Status: Repeater Bridge on 5GHz AC/N-Mixed (wl0 is purposely turned off) + USB Storage + lighttpd (using Entware's php8) + DDNS (custom) + Cron / working
Issues/Errors: none

_________________
▫ RSS feed for DD-WRT releases (2022): https://politepol.com/fd/BU5UpNmf6NRW
easyddup - A simple upgrade/downgrade utility by yoyoma2
saphirely
DD-WRT User


Joined: 13 Dec 2020
Posts: 169

PostPosted: Fri Jan 28, 2022 15:13    Post subject: Reply with quote
Netgear R6250
DD-WRT v3.0-r48218 std (01/28/22)
Linux 4.4.300 #5085 SMP Thu Jan 27 19:03:20 +07 2022 armv7l

CUI upgrade without reset, and from r48208

Works stable without unbound.

CPU 75.2 °C / WL0 49.4 °C
mrjcd
DD-WRT Guru


Joined: 31 Jan 2015
Posts: 5783
Location: Texas

PostPosted: Fri Jan 28, 2022 23:34    Post subject: Reply with quote
Linksys E2500
DD-WRT v3.0-r48218 mega (01/28/22)
Linux 4.4.300 #13996 Fri Jan 28 04:15:04 +07 2022 mips
'dd-wrt.v24-48218_NEWD-2_K3.x_mega.bin'
GUI install over r48138
used as a WAP --- all good

#

Linksys E1200 v2
DD-WRT v3.0-r48218 mega (01/28/22)
Linux 4.4.300 #13996 Fri Jan 28 04:15:04 +07 2022 mips
'dd-wrt.v24-48218_NEWD-2_K3.x_mega-nv64k.bin'
GUI install over r48138
used as client bridge --- all ok
dwardo
DD-WRT User


Joined: 07 Feb 2013
Posts: 115
Location: France

PostPosted: Sat Jan 29, 2022 13:53    Post subject: Reply with quote
Router/Version: TP-Link Archer C9 v1
File/Kernel: archer-c9v1-webflash.bin/Linux 4.4.300 #5087 SMP Fri Jan 28 03:08:39 +07 2022 armv7l
Previous/Reset: r48081/no
Mode/Status: Gateway/2.4GHz & 5GHz AP/Openvpn server/Wireguard server/DHCP server/DNS Server/Port forwarding/ipv4 & ipv6/CTF+FA
Issues/Errors: None yet
itwontbewe
DD-WRT User


Joined: 29 Sep 2020
Posts: 180

PostPosted: Sun Jan 30, 2022 16:37    Post subject: Reply with quote
Router Model: Netgear R7000P
Firmware Version: DD-WRT v3.0-r48218 std (01/28/22)
Kernel Version: Linux 4.4.300 #5091 SMP Fri Jan 28 03:34:34 +07 2022 armv7l
Reset: no
Operating Mode/Setup: Gateway / AP Unbound JFFS2
Status: running well. thanks BS and dd-wrt community


Last edited by itwontbewe on Thu Feb 10, 2022 15:44; edited 1 time in total
angler
DD-WRT User


Joined: 10 Feb 2012
Posts: 100

PostPosted: Sat Feb 05, 2022 17:21    Post subject: Reply with quote
Router/Version: Trendnet TEW811DRU / DD-WRT v3.0-r48218 mini (01/28/22)
File/Kernel: Linux 4.4.300 #5088 Fri Jan 28 03:14:45 +07 2022 armv7l
Previous/Reset: DD-WRT v3.0-r48141 mini (01/21/22)/no
Mode/Status: Client AP/ Booted ok, Temps: CPU 80.2 °C / WL0 54.3 °C / WL1 60.1 °C
Issues/Errors: temps appear a bit better than 48255-289, GUI accessible - will recheck later as it worked for a while under r48255 before breaking - thanks BS

occasionally loses connection to hotspot


Last edited by angler on Sat Feb 12, 2022 20:32; edited 1 time in total
strange
DD-WRT User


Joined: 18 Jun 2006
Posts: 64

PostPosted: Sat Feb 05, 2022 18:57    Post subject: Reply with quote
Using this one until the GUI issue is resolved.
_________________
Netgear XR500 - Gateway
R6700 v3 - Client Bridge
Display posts from previous:    Page 1 of 1
Post new topic   Reply to topic    DD-WRT Forum Forum Index -> Broadcom SoC based Hardware All times are GMT

Navigation

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You can attach files in this forum
You can download files in this forum